From: Dudley Du <dudley.dulixin@gmail.com>
To: dmitry.torokhov@gmail.com, rydberg@euromail.se
Cc: Dudley Du <dudley.dulixin@gmail.com>,
bleung@google.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v13 08/12] input: cyapa: add gen3 trackpad device force re-calibrate function support
Date: Tue, 9 Dec 2014 17:11:40 +0800 [thread overview]
Message-ID: <1418116304-11392-9-git-send-email-dudley.dulixin@gmail.com> (raw)
In-Reply-To: <1418116304-11392-1-git-send-email-dudley.dulixin@gmail.com>
Add force re-calibrate function supported for gen3 trackpad device,
it can be used through sysfs calibrate interface.
TEST=test on Chromebooks.
Signed-off-by: Dudley Du <dudley.dulixin@gmail.com>
---
drivers/input/mouse/cyapa_gen3.c | 58 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
index 3b2ad88..c654109 100644
--- a/drivers/input/mouse/cyapa_gen3.c
+++ b/drivers/input/mouse/cyapa_gen3.c
@@ -754,6 +754,63 @@ static int cyapa_gen3_do_fw_update(struct cyapa *cyapa,
return 0;
}
+static ssize_t cyapa_gen3_do_calibrate(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int tries = 20; /* max recalibration timeout 2s. */
+ int ret;
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
+ if (ret < 0) {
+ dev_err(dev, "Error reading dev status: %d\n", ret);
+ goto out;
+ }
+ if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) {
+ dev_warn(dev, "Trackpad device is busy, device state: 0x%02x\n",
+ ret);
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET,
+ OP_RECALIBRATION_MASK);
+ if (ret < 0) {
+ dev_err(dev, "Failed to send calibrate command: %d\n",
+ ret);
+ goto out;
+ }
+
+ do {
+ /*
+ * For this recalibration, the max time will not exceed 2s.
+ * The average time is approximately 500 - 700 ms, and we
+ * will check the status every 100 - 200ms.
+ */
+ usleep_range(100000, 200000);
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
+ if (ret < 0) {
+ dev_err(dev, "Error reading dev status: %d\n",
+ ret);
+ goto out;
+ }
+ if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL)
+ break;
+ } while (--tries);
+
+ if (tries == 0) {
+ dev_err(dev, "Failed to calibrate. Timeout.\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ dev_dbg(dev, "Calibration successful.\n");
+
+out:
+ return ret < 0 ? ret : count;
+}
+
static ssize_t cyapa_gen3_show_baseline(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1137,6 +1194,7 @@ const struct cyapa_dev_ops cyapa_gen3_ops = {
.bl_deactivate = cyapa_gen3_bl_deactivate,
.show_baseline = cyapa_gen3_show_baseline,
+ .calibrate_store = cyapa_gen3_do_calibrate,
.state_parse = cyapa_gen3_state_parse,
.operational_check = cyapa_gen3_do_operational_check,
--
1.9.1
next prev parent reply other threads:[~2014-12-09 9:13 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-09 9:11 [PATCH v13 00/12] input: cyapa: instruction of cyapa patches Dudley Du
2014-12-09 9:11 ` [PATCH v13 01/12] input: cyapa: re-design driver to support multi-trackpad in one driver Dudley Du
2014-12-09 9:11 ` [PATCH v13 02/12] input: cyapa: add gen5 trackpad device basic functions support Dudley Du
2014-12-09 9:11 ` [PATCH v13 03/12] input: cyapa: add power management interfaces supported for the device Dudley Du
2014-12-09 9:11 ` [PATCH v13 04/12] input: cyapa: add runtime " Dudley Du
2014-12-09 9:11 ` [PATCH v13 05/12] input: cyapa: add sysfs interfaces supported in the cyapa driver Dudley Du
2014-12-09 9:11 ` [PATCH v13 06/12] input: cyapa: add gen3 trackpad device firmware update function support Dudley Du
2014-12-09 9:11 ` [PATCH v13 07/12] input: cyapa: add gen3 trackpad device read baseline " Dudley Du
2014-12-09 9:11 ` Dudley Du [this message]
2014-12-09 9:11 ` [PATCH v13 09/12] input: cyapa: add gen5 trackpad device firmware update " Dudley Du
2014-12-10 3:33 ` Jeremiah Mahler
2014-12-10 8:54 ` Jeremiah Mahler
2014-12-10 9:19 ` Dudley Du
2014-12-10 11:06 ` Jeremiah Mahler
2014-12-09 9:11 ` [PATCH v13 10/12] input: cyapa: add gen5 trackpad device read baseline " Dudley Du
2014-12-10 4:02 ` Jeremiah Mahler
2014-12-09 9:11 ` [PATCH v13 11/12] input: cyapa: add gen5 trackpad device force re-calibrate " Dudley Du
2014-12-10 4:05 ` Jeremiah Mahler
2014-12-09 9:11 ` [PATCH v13 12/12] input: cyapa: add acpi device id supported Dudley Du
2014-12-10 4:10 ` [PATCH v13 00/12] input: cyapa: instruction of cyapa patches Jeremiah Mahler
2014-12-10 5:10 ` Dudley Du
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418116304-11392-9-git-send-email-dudley.dulixin@gmail.com \
--to=dudley.dulixin@gmail.com \
--cc=bleung@google.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).