From: Sascha Hauer <s.hauer@pengutronix.de>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
"Eddie Huang" <eddie.huang@mediatek.com>,
"Lee Jones" <lee.jones@linaro.org>,
"Yingjoe Chen (陳英洲)" <Yingjoe.Chen@mediatek.com>,
"Henry Chen" <henryc.chen@mediatek.com>,
"YH Chen (陳昱豪)" <yh.chen@mediatek.com>,
kernel@pengutronix.de, "Mike Turquette" <mturquette@linaro.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>
Subject: [PATCH 11/13] ARM: dts: mt8135-evbp1: Add PMIC support
Date: Mon, 9 Feb 2015 11:47:23 +0100 [thread overview]
Message-ID: <1423478845-2835-12-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1423478845-2835-1-git-send-email-s.hauer@pengutronix.de>
The MT8135 eval board contains a MT6397 PMIC. This adds the
corresponding device node to the dts file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boot/dts/mt8135-evbp1.dts | 193 +++++++++++++++++++++++++++++++++++++
1 file changed, 193 insertions(+)
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index a5adf97..3be2c8b 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -23,3 +23,196 @@
reg = <0 0x80000000 0 0x40000000>;
};
};
+
+&pwrap {
+ pmic: mt6397 {
+ compatible = "mediatek,mt6397";
+
+ mt6397regulator: mt6397regulator {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vpca7_reg: buck_vpca7 {
+ regulator-compatible = "buck_vpca7";
+ regulator-name = "vpca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vsramca15_reg: buck_vsramca15 {
+ regulator-compatible = "buck_vsramca15";
+ regulator-name = "vsramca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vsramca7_reg: buck_vsramca7 {
+ regulator-compatible = "buck_vsramca7";
+ regulator-name = "vsramca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vcore_reg: buck_vcore {
+ regulator-compatible = "buck_vcore";
+ regulator-name = "vcore";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vgpu_reg: buck_vgpu {
+ regulator-compatible = "buck_vgpu";
+ regulator-name = "vgpu";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vdrm_reg: buck_vdrm {
+ regulator-compatible = "buck_vdrm";
+ regulator-name = "vdrm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vio18_reg: buck_vio18 {
+ regulator-compatible = "buck_vio18";
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vtcxo_reg: ldo_vtcxo {
+ regulator-compatible = "ldo_vtcxo";
+ regulator-name = "vtcxo";
+ regulator-always-on;
+ };
+
+ mt6397_va28_reg: ldo_va28 {
+ regulator-compatible = "ldo_va28";
+ regulator-name = "va28";
+ regulator-always-on;
+ };
+
+ mt6397_vcama_reg: ldo_vcama {
+ regulator-compatible = "ldo_vcama";
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vio28_reg: ldo_vio28 {
+ regulator-compatible = "ldo_vio28";
+ regulator-name = "vio28";
+ regulator-always-on;
+ };
+
+ mt6397_vusb_reg: ldo_vusb {
+ regulator-compatible = "ldo_vusb";
+ regulator-name = "vusb";
+ };
+
+ mt6397_vmc_reg: ldo_vmc {
+ regulator-compatible = "ldo_vmc";
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmch_reg: ldo_vmch {
+ regulator-compatible = "ldo_vmch";
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+ regulator-compatible = "ldo_vemc3v3";
+ regulator-name = "vemc_3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp1_reg: ldo_vgp1 {
+ regulator-compatible = "ldo_vgp1";
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1220000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_vgp2_reg: ldo_vgp2 {
+ regulator-compatible = "ldo_vgp2";
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp3_reg: ldo_vgp3 {
+ regulator-compatible = "ldo_vgp3";
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp5_reg: ldo_vgp5 {
+ regulator-compatible = "ldo_vgp5";
+ regulator-name = "vgp5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp6_reg: ldo_vgp6 {
+ regulator-compatible = "ldo_vgp6";
+ regulator-name = "vgp6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vibr_reg: ldo_vibr {
+ regulator-compatible = "ldo_vibr";
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
+};
--
2.1.4
next prev parent reply other threads:[~2015-02-09 10:49 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-09 10:47 [PATCH v5]: clk: Add common clock support for Mediatek MT8135 and MT8173 Sascha Hauer
2015-02-09 10:47 ` [PATCH 01/13] clk: dts: mediatek: add Mediatek MT8135 clock bindings Sascha Hauer
2015-02-09 13:35 ` Philipp Zabel
2015-02-09 10:47 ` [PATCH 02/13] clk: mediatek: Add initial common clock support for Mediatek SoCs Sascha Hauer
2015-02-13 7:41 ` Tomasz Figa
2015-02-13 12:06 ` Sascha Hauer
2015-02-13 13:22 ` Tomasz Figa
2015-02-09 10:47 ` [PATCH 03/13] clk: mediatek: Add reset controller support Sascha Hauer
2015-02-09 13:35 ` Philipp Zabel
2015-02-09 10:47 ` [PATCH 04/13] clk: mediatek: Add basic clocks for Mediatek MT8135 Sascha Hauer
2015-02-09 10:47 ` [PATCH 05/13] clk: dts: mediatek: add Mediatek MT8173 clock bindings Sascha Hauer
2015-02-09 10:47 ` [PATCH 06/13] clk: mediatek: Add basic clocks for Mediatek MT8173 Sascha Hauer
2015-02-13 9:56 ` Tomasz Figa
2015-02-19 8:24 ` Sascha Hauer
2015-02-09 10:47 ` [PATCH 07/13] dt: bindings: Add MediaTek MT8135/MT8173 reset controller defines Sascha Hauer
2015-02-09 10:47 ` [PATCH 08/13] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC Sascha Hauer
2015-02-09 10:47 ` [PATCH 09/13] ARM: dts: mediatek: Enable clock support for Mediatek MT8135 Sascha Hauer
2015-02-09 10:51 ` Russell King - ARM Linux
2015-02-09 11:25 ` Sascha Hauer
2015-02-09 11:27 ` Russell King - ARM Linux
2015-02-09 11:44 ` Sascha Hauer
2015-02-09 10:47 ` [PATCH 10/13] ARM: dts: mt8135: Add pmic wrapper nodes Sascha Hauer
2015-02-09 10:47 ` Sascha Hauer [this message]
2015-02-09 10:47 ` [PATCH 12/13] mfd: dt-bindings: Add bindings for the MediaTek MT6397 PMIC Sascha Hauer
2015-02-09 10:47 ` [PATCH 13/13] mfd: Add support " Sascha Hauer
2015-02-16 9:56 ` Lee Jones
[not found] ` <20150218181904.421.59675@quantum>
[not found] ` <20150219082655.GV12209@pengutronix.de>
[not found] ` <20150219084349.GA12212@x1>
[not found] ` <20150219120409.GW12209@pengutronix.de>
[not found] ` <20150219121304.GH12212@x1>
2015-02-19 21:41 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423478845-2835-12-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=Yingjoe.Chen@mediatek.com \
--cc=eddie.huang@mediatek.com \
--cc=henryc.chen@mediatek.com \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@linaro.org \
--cc=robh+dt@kernel.org \
--cc=yh.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).