From: "Bryan O'Sullivan" <bos@pathscale.com>
To: linux-kernel@vger.kernel.org, rdreier@cisco.com, greg@kroah.com
Cc: openib-general@openib.org
Subject: [PATCH 18 of 18] ipath - kbuild infrastructure
Date: Wed, 22 Mar 2006 16:05:11 -0800 [thread overview]
Message-ID: <19bb7bcc08bbd2803fea.1143072311@eng-12.pathscale.com> (raw)
In-Reply-To: <patchbomb.1143072293@eng-12.pathscale.com>
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
diff -r 969e8cc0e2ee -r 19bb7bcc08bb drivers/infiniband/hw/ipath/Kconfig
--- /dev/null Thu Jan 1 00:00:00 1970 +0000
+++ b/drivers/infiniband/hw/ipath/Kconfig Wed Mar 22 14:55:28 2006 -0800
@@ -0,0 +1,18 @@
+config IPATH_CORE
+ tristate "PathScale InfiniPath Driver"
+ depends on 64BIT
+ ---help---
+ This is a low-level driver for PathScale InfiniPath host channel
+ adapters (HCAs) based on the HT-400 and PE-800 chips, including
+ the InfiniPath HT-460, the small form factor InfiniPath HT-460,
+ the InfiniPath HT-470 and the Linux Networx LS/X.
+
+config INFINIBAND_IPATH
+ tristate "PathScale InfiniPath Verbs Driver"
+ depends on IPATH_CORE && INFINIBAND
+ ---help---
+ This is a driver that provides InfiniBand verbs support for
+ PathScale InfiniPath host channel adapters (HCAs). This
+ allows these devices to be used with both kernel upper level
+ protocols such as IP-over-InfiniBand as well as with userspace
+ applications (in conjunction with InfiniBand userspace access).
diff -r 969e8cc0e2ee -r 19bb7bcc08bb drivers/infiniband/hw/ipath/Makefile
--- /dev/null Thu Jan 1 00:00:00 1970 +0000
+++ b/drivers/infiniband/hw/ipath/Makefile Wed Mar 22 14:55:28 2006 -0800
@@ -0,0 +1,41 @@
+EXTRA_CFLAGS += -DIPATH_IDSTR='"PathScale kernel.org driver"' \
+ -DIPATH_KERN_TYPE=0
+
+obj-$(CONFIG_IPATH_CORE) += ipath_core.o
+obj-$(CONFIG_INFINIBAND_IPATH) += ib_ipath.o
+obj-$(CONFIG_IPATH_ETHER) += ipath_ether.o
+
+ipath_core-y := \
+ ipath_copy.o \
+ ipath_diag.o \
+ ipath_driver.o \
+ ipath_eeprom.o \
+ ipath_file_ops.o \
+ ipath_fs.o \
+ ipath_ht400.o \
+ ipath_init_chip.o \
+ ipath_intr.o \
+ ipath_layer.o \
+ ipath_pe800.o \
+ ipath_sma.o \
+ ipath_stats.o \
+ ipath_sysfs.o \
+ ipath_user_pages.o
+
+ipath_core-$(CONFIG_X86_64) += ipath_wc_x86_64.o
+
+ib_ipath-y := \
+ ipath_cq.o \
+ ipath_keys.o \
+ ipath_mad.o \
+ ipath_mr.o \
+ ipath_qp.o \
+ ipath_rc.o \
+ ipath_ruc.o \
+ ipath_srq.o \
+ ipath_uc.o \
+ ipath_ud.o \
+ ipath_verbs.o \
+ ipath_verbs_mcast.o
+
+ipath_ether-y := ipath_eth.o
next prev parent reply other threads:[~2006-03-23 0:05 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-23 0:04 [PATCH 0 of 18] [RFC] ipath - almost-final round of patches for submission Bryan O'Sullivan
2006-03-23 0:04 ` [PATCH 1 of 18] ipath - core driver header files Bryan O'Sullivan
2006-03-23 0:04 ` [PATCH 2 of 18] ipath - core device driver Bryan O'Sullivan
2006-03-23 0:04 ` [PATCH 3 of 18] ipath - copy and send routines for sending an skb Bryan O'Sullivan
2006-03-23 0:04 ` [PATCH 4 of 18] ipath - support for HyperTransport devices Bryan O'Sullivan
2006-03-23 0:04 ` [PATCH 5 of 18] ipath - support for PCI Express devices Bryan O'Sullivan
2006-03-23 0:04 ` [PATCH 6 of 18] ipath - chip initialisation code Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 7 of 18] ipath - misc driver support code Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 8 of 18] ipath - sysfs and ipathfs support for core driver Bryan O'Sullivan
2006-03-23 5:49 ` Greg KH
2006-03-23 8:44 ` Bryan O'Sullivan
2006-03-23 20:06 ` Robert Walsh
2006-03-23 23:25 ` Greg KH
2006-03-23 6:30 ` Michael S. Tsirkin
2006-03-23 8:46 ` Bryan O'Sullivan
2006-03-23 9:40 ` Michael S. Tsirkin
2006-03-23 0:05 ` [PATCH 9 of 18] ipath - char devices for diagnostics and lightweight subnet management Bryan O'Sullivan
2006-03-23 6:41 ` Michael S. Tsirkin
2006-03-23 8:48 ` Bryan O'Sullivan
2006-03-23 9:37 ` Michael S. Tsirkin
2006-03-23 9:51 ` Bryan O'Sullivan
2006-03-23 10:13 ` Michael S. Tsirkin
2006-03-23 10:19 ` Bryan O'Sullivan
2006-03-23 19:18 ` Roland Dreier
2006-03-23 23:58 ` Bryan O'Sullivan
2006-03-24 1:27 ` Roland Dreier
2006-03-24 2:59 ` [openib-general] " Robert Walsh
2006-03-23 0:05 ` [PATCH 10 of 18] ipath - support for userspace apps using core driver Bryan O'Sullivan
2006-03-23 3:06 ` Andrew Morton
2006-03-23 8:37 ` Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 11 of 18] ipath - layering interfaces used by higher-level driver code Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 12 of 18] ipath - infiniband header files Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 13 of 18] ipath - infiniband UC and UD protocol support Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 14 of 18] ipath - infiniband RC " Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 15 of 18] ipath - misc infiniband code, part 1 Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 16 of 18] ipath - misc infiniband code, part 2 Bryan O'Sullivan
2006-03-23 0:05 ` [PATCH 17 of 18] ipath - infiniband verbs support Bryan O'Sullivan
2006-03-23 0:05 ` Bryan O'Sullivan [this message]
2006-03-24 4:41 [PATCH 0 of 18] ipath driver - for inclusion in 2.6.17 Bryan O'Sullivan
2006-03-24 4:41 ` [PATCH 18 of 18] ipath - kbuild infrastructure Bryan O'Sullivan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19bb7bcc08bbd2803fea.1143072311@eng-12.pathscale.com \
--to=bos@pathscale.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=openib-general@openib.org \
--cc=rdreier@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).