From: Sascha Hauer <s.hauer@pengutronix.de>
To: Mike Turquette <mturquette@linaro.org>
Cc: YH Chen <yh.chen@mediatek.com>,
linux-kernel@vger.kernel.org,
Henry Chen <henryc.chen@mediatek.com>,
linux-mediatek@lists.infradead.org, kernel@pengutronix.de,
Matthias Brugger <matthias.bgg@gmail.com>,
Yingjoe Chen <Yingjoe.Chen@mediatek.com>,
Eddie Huang <eddie.huang@mediatek.com>,
linux-arm-kernel@lists.infradead.org,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH 2/5] clk: mediatek: Add reset controller support
Date: Mon, 16 Mar 2015 06:55:08 +0100 [thread overview]
Message-ID: <1426485311-31428-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1426485311-31428-1-git-send-email-s.hauer@pengutronix.de>
The pericfg and infracfg units also provide reset lines to several
other SoC internal units. Add support for the reset controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mtk.h | 10 +++++
drivers/clk/mediatek/reset.c | 99 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 110 insertions(+)
create mode 100644 drivers/clk/mediatek/reset.c
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index c384e97..0b6f1c3 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1 +1,2 @@
obj-y += clk-mtk.o clk-pll.o clk-gate.o
+obj-$(CONFIG_RESET_CONTROLLER) += reset.o
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index c660a9e..fc98101 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -152,4 +152,14 @@ void __init mtk_clk_register_plls(struct device_node *node,
const struct mtk_pll_data *plls, int num_plls,
struct clk_onecell_data *clk_data);
+#ifdef CONFIG_RESET_CONTROLLER
+void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs);
+#else
+static inline void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs)
+{
+}
+#endif
+
#endif /* __DRV_CLK_MTK_H */
diff --git a/drivers/clk/mediatek/reset.c b/drivers/clk/mediatek/reset.c
new file mode 100644
index 0000000..3a85a53
--- /dev/null
+++ b/drivers/clk/mediatek/reset.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+
+#include "clk-mtk.h"
+
+struct mtk_reset {
+ struct regmap *regmap;
+ int regofs;
+ struct reset_controller_dev rcdev;
+};
+
+static int mtk_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mtk_reset *data = container_of(rcdev, struct mtk_reset, rcdev);
+
+ return regmap_update_bits(data->regmap, data->regofs + ((id / 32) << 2),
+ BIT(id % 32), ~0);
+}
+
+static int mtk_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mtk_reset *data = container_of(rcdev, struct mtk_reset, rcdev);
+
+ return regmap_update_bits(data->regmap, data->regofs + ((id / 32) << 2),
+ BIT(id % 32), 0);
+}
+
+static int mtk_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int ret;
+
+ ret = mtk_reset_assert(rcdev, id);
+ if (ret)
+ return ret;
+
+ return mtk_reset_deassert(rcdev, id);
+}
+
+static struct reset_control_ops mtk_reset_ops = {
+ .assert = mtk_reset_assert,
+ .deassert = mtk_reset_deassert,
+ .reset = mtk_reset,
+};
+
+void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs)
+{
+ struct mtk_reset *data;
+ int ret;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap)) {
+ pr_err("Cannot find regmap for %s: %ld\n", np->full_name,
+ PTR_ERR(regmap));
+ return;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return;
+
+ data->regmap = regmap;
+ data->regofs = regofs;
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = num_regs * 32;
+ data->rcdev.ops = &mtk_reset_ops;
+ data->rcdev.of_node = np;
+
+ ret = reset_controller_register(&data->rcdev);
+ if (ret) {
+ pr_err("could not register reset controller: %d\n", ret);
+ kfree(data);
+ return;
+ }
+}
--
2.1.4
next prev parent reply other threads:[~2015-03-16 5:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-16 5:55 [PATCH v7]: clk: Add common clock support for Mediatek MT8135 and MT8173 Sascha Hauer
2015-03-16 5:55 ` [PATCH 1/5] clk: mediatek: Add initial common clock support for Mediatek SoCs Sascha Hauer
2015-03-16 5:55 ` Sascha Hauer [this message]
2015-03-16 5:55 ` [PATCH 3/5] clk: mediatek: Add basic clocks for Mediatek MT8135 Sascha Hauer
2015-03-16 7:03 ` Uwe Kleine-König
2015-03-17 9:47 ` Sascha Hauer
2015-03-17 13:54 ` Uwe Kleine-König
2015-03-16 5:55 ` [PATCH 4/5] clk: mediatek: Add basic clocks for Mediatek MT8173 Sascha Hauer
2015-03-16 5:55 ` [PATCH 5/5] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2015-02-22 11:49 [PATCH v6]: clk: Add common clock support for Mediatek MT8135 and MT8173 Sascha Hauer
2015-02-22 11:49 ` [PATCH 2/5] clk: mediatek: Add reset controller support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426485311-31428-3-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=Yingjoe.Chen@mediatek.com \
--cc=eddie.huang@mediatek.com \
--cc=henryc.chen@mediatek.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@linaro.org \
--cc=yh.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).