linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org, Kevin Hilman <khilman@kernel.org>,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	kernel@pengutronix.de, Matthias Brugger <matthias.bgg@gmail.com>,
	Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH 1/4] soc: mediatek: Add infracfg misc driver support
Date: Mon, 22 Jun 2015 08:35:39 +0200	[thread overview]
Message-ID: <1434954942-30179-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1434954942-30179-1-git-send-email-s.hauer@pengutronix.de>

This adds support for some miscellaneous bits of the infracfg controller.
The mtk_infracfg_set/clear_bus_protection functions are necessary for
the scpsys power domain driver to handle the bus protection bits which
are contained in the infacfg register space.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/soc/mediatek/Kconfig          |  9 ++++
 drivers/soc/mediatek/Makefile         |  1 +
 drivers/soc/mediatek/mtk-infracfg.c   | 91 +++++++++++++++++++++++++++++++++++
 include/linux/soc/mediatek/infracfg.h | 26 ++++++++++
 4 files changed, 127 insertions(+)
 create mode 100644 drivers/soc/mediatek/mtk-infracfg.c
 create mode 100644 include/linux/soc/mediatek/infracfg.h

diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index bcdb22d..e4f37a3 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -1,6 +1,15 @@
 #
 # MediaTek SoC drivers
 #
+config MTK_INFRACFG
+	bool "MediaTek INFRACFG Support"
+	depends on ARCH_MEDIATEK
+	select REGMAP
+	help
+	  Say yes here to add support for the MediaTek INFRACFG controller. The
+	  INFRACFG controller contains various infrastructure registers not
+	  directly associated to any device.
+
 config MTK_PMIC_WRAP
 	tristate "MediaTek PMIC Wrapper Support"
 	depends on ARCH_MEDIATEK
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index ecaf4de..3fa940f 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -1 +1,2 @@
+obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
 obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
diff --git a/drivers/soc/mediatek/mtk-infracfg.c b/drivers/soc/mediatek/mtk-infracfg.c
new file mode 100644
index 0000000..ca786e0
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-infracfg.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/jiffies.h>
+#include <linux/regmap.h>
+#include <linux/soc/mediatek/infracfg.h>
+#include <asm/processor.h>
+
+#define INFRA_TOPAXI_PROTECTEN		0x0220
+#define INFRA_TOPAXI_PROTECTSTA1	0x0228
+
+/**
+ * mtk_infracfg_set_bus_protection - enable bus protection
+ * @regmap: The infracfg regmap
+ * @mask: The mask containing the protection bits to be enabled.
+ *
+ * This function enables the bus protection bits for disabled power
+ * domains so that the system does not hanf when some unit accesses the
+ * bus while in power down.
+ */
+int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask)
+{
+	unsigned long expired;
+	u32 val;
+	int ret;
+
+	regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask, mask);
+
+	expired = jiffies + HZ;
+
+	while (1) {
+		ret = regmap_read(infracfg, INFRA_TOPAXI_PROTECTSTA1, &val);
+		if (ret)
+			return ret;
+
+		if ((val & mask) == mask)
+			break;
+
+		cpu_relax();
+		if (time_after(jiffies, expired))
+			return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * mtk_infracfg_clear_bus_protection - disable bus protection
+ * @regmap: The infracfg regmap
+ * @mask: The mask containing the protection bits to be disabled.
+ *
+ * This function disables the bus protection bits previously enabled with
+ * mtk_infracfg_set_bus_protection.
+ */
+int mtk_infracfg_clear_bus_protection(struct regmap *infracfg, u32 mask)
+{
+	unsigned long expired;
+	int ret;
+
+	regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask, 0);
+
+	expired = jiffies + HZ;
+
+	while (1) {
+		u32 val;
+
+		ret = regmap_read(infracfg, INFRA_TOPAXI_PROTECTSTA1, &val);
+		if (ret)
+			return ret;
+
+		if (!(val & mask))
+			break;
+
+		cpu_relax();
+		if (time_after(jiffies, expired))
+			return -EIO;
+	}
+
+	return 0;
+}
diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h
new file mode 100644
index 0000000..a5714e9
--- /dev/null
+++ b/include/linux/soc/mediatek/infracfg.h
@@ -0,0 +1,26 @@
+#ifndef __SOC_MEDIATEK_INFRACFG_H
+#define __SOC_MEDIATEK_INFRACFG_H
+
+#define MT8173_TOP_AXI_PROT_EN_MCI_M2		BIT(0)
+#define MT8173_TOP_AXI_PROT_EN_MM_M0		BIT(1)
+#define MT8173_TOP_AXI_PROT_EN_MM_M1		BIT(2)
+#define MT8173_TOP_AXI_PROT_EN_MMAPB_S		BIT(6)
+#define MT8173_TOP_AXI_PROT_EN_L2C_M2		BIT(9)
+#define MT8173_TOP_AXI_PROT_EN_L2SS_SMI		BIT(11)
+#define MT8173_TOP_AXI_PROT_EN_L2SS_ADD		BIT(12)
+#define MT8173_TOP_AXI_PROT_EN_CCI_M2		BIT(13)
+#define MT8173_TOP_AXI_PROT_EN_MFG_S		BIT(14)
+#define MT8173_TOP_AXI_PROT_EN_PERI_M0		BIT(15)
+#define MT8173_TOP_AXI_PROT_EN_PERI_M1		BIT(16)
+#define MT8173_TOP_AXI_PROT_EN_DEBUGSYS		BIT(17)
+#define MT8173_TOP_AXI_PROT_EN_CQ_DMA		BIT(18)
+#define MT8173_TOP_AXI_PROT_EN_GCPU		BIT(19)
+#define MT8173_TOP_AXI_PROT_EN_IOMMU		BIT(20)
+#define MT8173_TOP_AXI_PROT_EN_MFG_M0		BIT(21)
+#define MT8173_TOP_AXI_PROT_EN_MFG_M1		BIT(22)
+#define MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT	BIT(23)
+
+int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask);
+int mtk_infracfg_clear_bus_protection(struct regmap *infracfg, u32 mask);
+
+#endif /* __SOC_MEDIATEK_INFRACFG_H */
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

  reply	other threads:[~2015-06-22  6:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-22  6:35 [PATCH v5] Mediatek SCPSYS power domain support Sascha Hauer
2015-06-22  6:35 ` Sascha Hauer [this message]
2015-06-22 13:57   ` [PATCH 1/4] soc: mediatek: Add infracfg misc driver support Daniel Kurtz
2015-06-22  6:35 ` [PATCH 2/4] dt-bindings: soc: Add documentation for the MediaTek SCPSYS unit Sascha Hauer
2015-06-22  6:35 ` [PATCH 3/4] soc: Mediatek: Add SCPSYS power domain driver Sascha Hauer
2015-06-22 13:53   ` Daniel Kurtz
2015-06-23  6:04     ` Sascha Hauer
2015-06-22  6:35 ` [PATCH 4/4] ARM64: MediaTek MT8173: Add SCPSYS device node Sascha Hauer
2015-06-24  6:17 [PATCH v6] Mediatek SCPSYS power domain support Sascha Hauer
2015-06-24  6:17 ` [PATCH 1/4] soc: mediatek: Add infracfg misc driver support Sascha Hauer
2015-06-24 20:13   ` Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434954942-30179-2-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).