linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mike Galbraith <umgwanakikbuti@gmail.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Josef Bacik <jbacik@fb.com>,
	riel@redhat.com, mingo@redhat.com, linux-kernel@vger.kernel.org,
	morten.rasmussen@arm.com, kernel-team <Kernel-team@fb.com>
Subject: [patch] sched: beef up wake_wide()
Date: Wed, 08 Jul 2015 08:13:46 +0200	[thread overview]
Message-ID: <1436336026.3767.53.camel@gmail.com> (raw)
In-Reply-To: <559C0700.6090009@fb.com>


Josef Bacik reported that Facebook sees better performance with their
1:N load (1 dispatch/node, N workers/node) when carrying an old patch
to try very hard to wake to an idle CPU.  While looking at wake_wide(),
I noticed that it doesn't pay attention to wakeup of the 1:N waker,
returning 1 only when the 1:N waker is waking one of its minions.

Correct that, and don't bother doing domain traversal when we know
that all we need to do is check for an idle cpu.

While at it, adjust task_struct bits, we don't need a 64bit counter.

Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Tested-by: Josef Bacik <jbacik@fb.com>
---
 include/linux/sched.h |    4 +--
 kernel/sched/fair.c   |   56 ++++++++++++++++++++++++--------------------------
 2 files changed, 29 insertions(+), 31 deletions(-)

--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1351,9 +1351,9 @@ struct task_struct {
 #ifdef CONFIG_SMP
 	struct llist_node wake_entry;
 	int on_cpu;
-	struct task_struct *last_wakee;
-	unsigned long wakee_flips;
+	unsigned int wakee_flips;
 	unsigned long wakee_flip_decay_ts;
+	struct task_struct *last_wakee;
 
 	int wake_cpu;
 #endif
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4730,26 +4730,27 @@ static long effective_load(struct task_g
 
 #endif
 
+/*
+ * Detect 1:N waker/wakee relationship via a switching-frequency heuristic.
+ * A waker of many should wake a different task than the one last awakened
+ * at a frequency roughly N times higher than one of its wakees.  In order
+ * to determine whether we should let the load spread vs consolodating to
+ * shared cache, we look for a minimum 'flip' frequency of llc_size in one
+ * partner, and a factor of lls_size higher frequency in the other.  With
+ * both conditions met, we can be relatively sure that we are seeing a 1:N
+ * relationship, and that load size exceeds socket size.
+ */
 static int wake_wide(struct task_struct *p)
 {
+	unsigned int waker_flips = current->wakee_flips;
+	unsigned int wakee_flips = p->wakee_flips;
 	int factor = this_cpu_read(sd_llc_size);
 
-	/*
-	 * Yeah, it's the switching-frequency, could means many wakee or
-	 * rapidly switch, use factor here will just help to automatically
-	 * adjust the loose-degree, so bigger node will lead to more pull.
-	 */
-	if (p->wakee_flips > factor) {
-		/*
-		 * wakee is somewhat hot, it needs certain amount of cpu
-		 * resource, so if waker is far more hot, prefer to leave
-		 * it alone.
-		 */
-		if (current->wakee_flips > (factor * p->wakee_flips))
-			return 1;
-	}
-
-	return 0;
+	if (waker_flips < wakee_flips)
+		swap(waker_flips, wakee_flips);
+	if (wakee_flips < factor || waker_flips < wakee_flips * factor)
+		return 0;
+	return 1;
 }
 
 static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync)
@@ -4761,13 +4762,6 @@ static int wake_affine(struct sched_doma
 	unsigned long weight;
 	int balanced;
 
-	/*
-	 * If we wake multiple tasks be careful to not bounce
-	 * ourselves around too much.
-	 */
-	if (wake_wide(p))
-		return 0;
-
 	idx	  = sd->wake_idx;
 	this_cpu  = smp_processor_id();
 	prev_cpu  = task_cpu(p);
@@ -5021,14 +5015,17 @@ select_task_rq_fair(struct task_struct *
 {
 	struct sched_domain *tmp, *affine_sd = NULL, *sd = NULL;
 	int cpu = smp_processor_id();
-	int new_cpu = cpu;
+	int new_cpu = prev_cpu;
 	int want_affine = 0;
 	int sync = wake_flags & WF_SYNC;
 
-	if (sd_flag & SD_BALANCE_WAKE)
-		want_affine = cpumask_test_cpu(cpu, tsk_cpus_allowed(p));
-
 	rcu_read_lock();
+	if (sd_flag & SD_BALANCE_WAKE) {
+		want_affine = !wake_wide(p) && cpumask_test_cpu(cpu, tsk_cpus_allowed(p));
+		if (!want_affine)
+			goto select_idle;
+	}
+
 	for_each_domain(cpu, tmp) {
 		if (!(tmp->flags & SD_LOAD_BALANCE))
 			continue;
@@ -5048,10 +5045,11 @@ select_task_rq_fair(struct task_struct *
 	}
 
 	if (affine_sd && cpu != prev_cpu && wake_affine(affine_sd, p, sync))
-		prev_cpu = cpu;
+		new_cpu = cpu;
 
 	if (sd_flag & SD_BALANCE_WAKE) {
-		new_cpu = select_idle_sibling(p, prev_cpu);
+select_idle:
+		new_cpu = select_idle_sibling(p, new_cpu);
 		goto unlock;
 	}
 



  reply	other threads:[~2015-07-08  6:13 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-27 21:22 [PATCH RESEND] sched: prefer an idle cpu vs an idle sibling for BALANCE_WAKE Josef Bacik
2015-05-28  3:46 ` Mike Galbraith
2015-05-28  9:49   ` Morten Rasmussen
2015-05-28 10:57     ` Mike Galbraith
2015-05-28 11:48       ` Morten Rasmussen
2015-05-28 11:49         ` Mike Galbraith
2015-05-28 10:21 ` Peter Zijlstra
2015-05-28 11:05   ` Peter Zijlstra
2015-05-28 14:27     ` Josef Bacik
2015-05-29 21:03     ` Josef Bacik
2015-05-30  3:55       ` Mike Galbraith
2015-06-01 19:38       ` Josef Bacik
2015-06-01 20:42         ` Peter Zijlstra
2015-06-01 21:03           ` Josef Bacik
2015-06-02 17:12           ` Josef Bacik
2015-06-03 14:12             ` Rik van Riel
2015-06-03 14:24               ` Peter Zijlstra
2015-06-03 14:49                 ` Josef Bacik
2015-06-03 15:30                 ` Mike Galbraith
2015-06-03 15:57                   ` Josef Bacik
2015-06-03 16:53                     ` Mike Galbraith
2015-06-03 17:16                       ` Josef Bacik
2015-06-03 17:43                         ` Mike Galbraith
2015-06-03 20:34                           ` Josef Bacik
2015-06-04  4:52                             ` Mike Galbraith
2015-06-01 22:15         ` Rik van Riel
2015-06-11 20:33     ` Josef Bacik
2015-06-12  3:42       ` Rik van Riel
2015-06-12  5:35     ` Mike Galbraith
2015-06-17 18:06       ` Josef Bacik
2015-06-18  0:55         ` Mike Galbraith
2015-06-18  3:46           ` Josef Bacik
2015-06-18  4:12             ` Mike Galbraith
2015-07-02 17:44               ` Josef Bacik
2015-07-03  6:40                 ` Mike Galbraith
2015-07-03  9:29                   ` Mike Galbraith
2015-07-04 15:57                   ` Mike Galbraith
2015-07-05  7:17                     ` Mike Galbraith
2015-07-06  5:13                       ` Mike Galbraith
2015-07-06 14:34                         ` Josef Bacik
2015-07-06 18:36                           ` Mike Galbraith
2015-07-06 19:41                             ` Josef Bacik
2015-07-07  4:01                               ` Mike Galbraith
2015-07-07  9:43                                 ` [patch] " Mike Galbraith
2015-07-07 13:40                                   ` Josef Bacik
2015-07-07 15:24                                     ` Mike Galbraith
2015-07-07 17:06                                   ` Josef Bacik
2015-07-08  6:13                                     ` Mike Galbraith [this message]
2015-07-09 13:26                                       ` [patch] sched: beef up wake_wide() Peter Zijlstra
2015-07-09 14:07                                         ` Mike Galbraith
2015-07-09 14:46                                           ` Mike Galbraith
2015-07-10  5:19                                         ` Mike Galbraith
2015-07-10 13:41                                           ` Josef Bacik
2015-07-10 20:59                                           ` Josef Bacik
2015-07-11  3:11                                             ` Mike Galbraith
2015-07-13 13:53                                               ` Josef Bacik
2015-07-14 11:19                                               ` Peter Zijlstra
2015-07-14 13:49                                                 ` Mike Galbraith
2015-07-14 14:07                                                   ` Peter Zijlstra
2015-07-14 14:17                                                     ` Mike Galbraith
2015-07-14 15:04                                                       ` Peter Zijlstra
2015-07-14 15:39                                                         ` Mike Galbraith
2015-07-14 16:01                                                           ` Josef Bacik
2015-07-14 17:59                                                             ` Mike Galbraith
2015-07-15 17:11                                                               ` Josef Bacik
2015-08-03 17:07                                                           ` [tip:sched/core] sched/fair: Beef " tip-bot for Mike Galbraith
2015-05-28 11:16   ` [PATCH RESEND] sched: prefer an idle cpu vs an idle sibling for BALANCE_WAKE Mike Galbraith
2015-05-28 11:49     ` Ingo Molnar
2015-05-28 12:15       ` Mike Galbraith
2015-05-28 12:19         ` Peter Zijlstra
2015-05-28 12:29           ` Ingo Molnar
2015-05-28 15:22           ` David Ahern
2015-05-28 11:55 ` Srikar Dronamraju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436336026.3767.53.camel@gmail.com \
    --to=umgwanakikbuti@gmail.com \
    --cc=Kernel-team@fb.com \
    --cc=jbacik@fb.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=morten.rasmussen@arm.com \
    --cc=peterz@infradead.org \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).