[PATCH-RFC,4/7] mips: convert to generic builtin command line
diff mbox series

Message ID 1444146434-12776-4-git-send-email-danielwa@cisco.com
State New, archived
Headers show
Series
  • [PATCH-RFC,1/7] add generic builtin command line
Related show

Commit Message

Daniel Walker Oct. 6, 2015, 3:47 p.m. UTC
This updates the mips code to use the CONFIG_GENERIC_CMDLINE
option.

Cc: xe-kernel@external.cisco.com
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
 arch/mips/Kconfig        |  1 +
 arch/mips/Kconfig.debug  | 47 -----------------------------------------------
 arch/mips/kernel/setup.c | 20 +++-----------------
 3 files changed, 4 insertions(+), 64 deletions(-)

Patch
diff mbox series

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e3aa5b0..2b05aeb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -60,6 +60,7 @@  config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select GENERIC_CMDLINE
 
 menu "Machine selection"
 
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index e250524..16aab1c 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -32,53 +32,6 @@  config EARLY_PRINTK_8250
 config USE_GENERIC_EARLY_PRINTK_8250
 	bool
 
-config CMDLINE_BOOL
-	bool "Built-in kernel command line"
-	default n
-	help
-	  For most systems, it is firmware or second stage bootloader that
-	  by default specifies the kernel command line options.  However,
-	  it might be necessary or advantageous to either override the
-	  default kernel command line or add a few extra options to it.
-	  For such cases, this option allows you to hardcode your own
-	  command line options directly into the kernel.  For that, you
-	  should choose 'Y' here, and fill in the extra boot arguments
-	  in CONFIG_CMDLINE.
-
-	  The built-in options will be concatenated to the default command
-	  line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
-	  command line will be ignored and replaced by the built-in string.
-
-	  Most MIPS systems will normally expect 'N' here and rely upon
-	  the command line from the firmware or the second-stage bootloader.
-
-config CMDLINE
-	string "Default kernel command string"
-	depends on CMDLINE_BOOL
-	default ""
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel.  For these platforms, and for the cases
-	  when you want to add some extra options to the command line or ignore
-	  the default command line, you can supply some command-line options at
-	  build time by entering them here.  In other cases you can specify
-	  kernel args so that you don't have to set them up in board prom
-	  initialization routines.
-
-	  For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
-	  options.
-
-config CMDLINE_OVERRIDE
-	bool "Built-in command line overrides firmware arguments"
-	default n
-	depends on CMDLINE_BOOL
-	help
-	  By setting this option to 'Y' you will have your kernel ignore
-	  command line arguments from firmware or second stage bootloader.
-	  Instead, the built-in command line will be used exclusively.
-
-	  Normally, you will choose 'N' here.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 4795151..de6fc31 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -26,6 +26,7 @@ 
 #include <linux/sizes.h>
 #include <linux/device.h>
 #include <linux/dma-contiguous.h>
+#include <linux/cmdline.h>
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -67,10 +68,6 @@  struct boot_mem_map boot_mem_map;
 static char __initdata command_line[COMMAND_LINE_SIZE];
 char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
 
-#ifdef CONFIG_CMDLINE_BOOL
-static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-#endif
-
 /*
  * mips_io_port_base is the begin of the address space to which x86 style
  * I/O ports are mapped.
@@ -640,19 +637,8 @@  static void __init arch_mem_init(char **cmdline_p)
 	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
-	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
-	if (builtin_cmdline[0]) {
-		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
-	}
-	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
-#endif
-#else
-	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
-#endif
+	cmdline_add_builtin(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 
 	*cmdline_p = command_line;