linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Suzuki K. Poulose" <suzuki.poulose@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: catalin.marinas@arm.com, mark.rutland@arm.com,
	marc.zyngier@arm.com, will.deacon@arm.com,
	linux-kernel@vger.kernel.org, ard.biesheuvel@linaro.org,
	chirstoff.dall@linaro.org, steve.capper@linaro.org,
	jeremy.linton@arm.com,
	"Suzuki K. Poulose" <suzuki.poulose@arm.com>
Subject: [PATCHv4 01/12] arm64: Move swapper pagetable definitions
Date: Fri, 16 Oct 2015 18:06:10 +0100	[thread overview]
Message-ID: <1445015181-29711-2-git-send-email-suzuki.poulose@arm.com> (raw)
In-Reply-To: <1445015181-29711-1-git-send-email-suzuki.poulose@arm.com>

Move the kernel pagetable (both swapper and idmap) definitions
from the generic asm/page.h to a new file, asm/kernel-pgtable.h.

This is mostly a cosmetic change, to clean up the asm/page.h to
get rid of the arch specific details which are not needed by the
generic code.

Also renames the symbols to prevent conflicts. e.g,
 	BLOCK_SHIFT => SWAPPER_BLOCK_SHIFT

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
---
 arch/arm64/include/asm/kernel-pgtable.h |   65 +++++++++++++++++++++++++++++++
 arch/arm64/include/asm/page.h           |   18 ---------
 arch/arm64/kernel/head.S                |   37 ++++--------------
 arch/arm64/kernel/vmlinux.lds.S         |    1 +
 4 files changed, 74 insertions(+), 47 deletions(-)
 create mode 100644 arch/arm64/include/asm/kernel-pgtable.h

diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
new file mode 100644
index 0000000..3c92fa7
--- /dev/null
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -0,0 +1,65 @@
+/*
+ * Kernel page table mapping
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_KERNEL_PGTABLE_H
+#define __ASM_KERNEL_PGTABLE_H
+
+/*
+ * The idmap and swapper page tables need some space reserved in the kernel
+ * image. Both require pgd, pud (4 levels only) and pmd tables to (section)
+ * map the kernel. With the 64K page configuration, swapper and idmap need to
+ * map to pte level. The swapper also maps the FDT (see __create_page_tables
+ * for more information). Note that the number of ID map translation levels
+ * could be increased on the fly if system RAM is out of reach for the default
+ * VA range, so 3 pages are reserved in all cases.
+ */
+#ifdef CONFIG_ARM64_64K_PAGES
+#define SWAPPER_PGTABLE_LEVELS	(CONFIG_PGTABLE_LEVELS)
+#else
+#define SWAPPER_PGTABLE_LEVELS	(CONFIG_PGTABLE_LEVELS - 1)
+#endif
+
+#define SWAPPER_DIR_SIZE	(SWAPPER_PGTABLE_LEVELS * PAGE_SIZE)
+#define IDMAP_DIR_SIZE		(3 * PAGE_SIZE)
+
+/* Initial memory map size */
+#ifdef CONFIG_ARM64_64K_PAGES
+#define SWAPPER_BLOCK_SHIFT	PAGE_SHIFT
+#define SWAPPER_BLOCK_SIZE	PAGE_SIZE
+#define SWAPPER_TABLE_SHIFT	PMD_SHIFT
+#else
+#define SWAPPER_BLOCK_SHIFT	SECTION_SHIFT
+#define SWAPPER_BLOCK_SIZE	SECTION_SIZE
+#define SWAPPER_TABLE_SHIFT	PUD_SHIFT
+#endif
+
+
+/*
+ * Initial memory map attributes.
+ */
+#define SWAPPER_PTE_FLAGS	(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
+#define SWAPPER_PMD_FLAGS	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
+
+#ifdef CONFIG_ARM64_64K_PAGES
+#define SWAPPER_MM_MMUFLAGS	(PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS)
+#else
+#define SWAPPER_MM_MMUFLAGS	(PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS)
+#endif
+
+
+#endif	/* __ASM_KERNEL_PGTABLE_H */
diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h
index 33892ef..da32354 100644
--- a/arch/arm64/include/asm/page.h
+++ b/arch/arm64/include/asm/page.h
@@ -34,24 +34,6 @@
 #define CONT_SIZE		(_AC(1, UL) << (CONT_SHIFT + PAGE_SHIFT))
 #define CONT_MASK		(~(CONT_SIZE-1))
 
-/*
- * The idmap and swapper page tables need some space reserved in the kernel
- * image. Both require pgd, pud (4 levels only) and pmd tables to (section)
- * map the kernel. With the 64K page configuration, swapper and idmap need to
- * map to pte level. The swapper also maps the FDT (see __create_page_tables
- * for more information). Note that the number of ID map translation levels
- * could be increased on the fly if system RAM is out of reach for the default
- * VA range, so 3 pages are reserved in all cases.
- */
-#ifdef CONFIG_ARM64_64K_PAGES
-#define SWAPPER_PGTABLE_LEVELS	(CONFIG_PGTABLE_LEVELS)
-#else
-#define SWAPPER_PGTABLE_LEVELS	(CONFIG_PGTABLE_LEVELS - 1)
-#endif
-
-#define SWAPPER_DIR_SIZE	(SWAPPER_PGTABLE_LEVELS * PAGE_SIZE)
-#define IDMAP_DIR_SIZE		(3 * PAGE_SIZE)
-
 #ifndef __ASSEMBLY__
 
 #include <asm/pgtable-types.h>
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 2a8c1d5..149fce3 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -29,6 +29,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
 #include <asm/cputype.h>
+#include <asm/kernel-pgtable.h>
 #include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/pgtable-hwdef.h>
@@ -46,32 +47,10 @@
 #error TEXT_OFFSET must be less than 2MB
 #endif
 
-#ifdef CONFIG_ARM64_64K_PAGES
-#define BLOCK_SHIFT	PAGE_SHIFT
-#define BLOCK_SIZE	PAGE_SIZE
-#define TABLE_SHIFT	PMD_SHIFT
-#else
-#define BLOCK_SHIFT	SECTION_SHIFT
-#define BLOCK_SIZE	SECTION_SIZE
-#define TABLE_SHIFT	PUD_SHIFT
-#endif
-
 #define KERNEL_START	_text
 #define KERNEL_END	_end
 
 /*
- * Initial memory map attributes.
- */
-#define PTE_FLAGS	PTE_TYPE_PAGE | PTE_AF | PTE_SHARED
-#define PMD_FLAGS	PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S
-
-#ifdef CONFIG_ARM64_64K_PAGES
-#define MM_MMUFLAGS	PTE_ATTRINDX(MT_NORMAL) | PTE_FLAGS
-#else
-#define MM_MMUFLAGS	PMD_ATTRINDX(MT_NORMAL) | PMD_FLAGS
-#endif
-
-/*
  * Kernel startup entry point.
  * ---------------------------
  *
@@ -293,7 +272,7 @@ ENDPROC(preserve_boot_args)
 	.macro	create_pgd_entry, tbl, virt, tmp1, tmp2
 	create_table_entry \tbl, \virt, PGDIR_SHIFT, PTRS_PER_PGD, \tmp1, \tmp2
 #if SWAPPER_PGTABLE_LEVELS == 3
-	create_table_entry \tbl, \virt, TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2
+	create_table_entry \tbl, \virt, SWAPPER_TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2
 #endif
 	.endm
 
@@ -305,15 +284,15 @@ ENDPROC(preserve_boot_args)
  * Corrupts:	phys, start, end, pstate
  */
 	.macro	create_block_map, tbl, flags, phys, start, end
-	lsr	\phys, \phys, #BLOCK_SHIFT
-	lsr	\start, \start, #BLOCK_SHIFT
+	lsr	\phys, \phys, #SWAPPER_BLOCK_SHIFT
+	lsr	\start, \start, #SWAPPER_BLOCK_SHIFT
 	and	\start, \start, #PTRS_PER_PTE - 1	// table index
-	orr	\phys, \flags, \phys, lsl #BLOCK_SHIFT	// table entry
-	lsr	\end, \end, #BLOCK_SHIFT
+	orr	\phys, \flags, \phys, lsl #SWAPPER_BLOCK_SHIFT	// table entry
+	lsr	\end, \end, #SWAPPER_BLOCK_SHIFT
 	and	\end, \end, #PTRS_PER_PTE - 1		// table end index
 9999:	str	\phys, [\tbl, \start, lsl #3]		// store the entry
 	add	\start, \start, #1			// next entry
-	add	\phys, \phys, #BLOCK_SIZE		// next block
+	add	\phys, \phys, #SWAPPER_BLOCK_SIZE		// next block
 	cmp	\start, \end
 	b.ls	9999b
 	.endm
@@ -350,7 +329,7 @@ __create_page_tables:
 	cmp	x0, x6
 	b.lo	1b
 
-	ldr	x7, =MM_MMUFLAGS
+	ldr	x7, =SWAPPER_MM_MMUFLAGS
 
 	/*
 	 * Create the identity mapping.
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 9807333..8a5d97b 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -5,6 +5,7 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/kernel-pgtable.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
-- 
1.7.9.5


  reply	other threads:[~2015-10-16 17:06 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-16 17:06 [PATCHv4 00/12] arm64: 16K translation granule support Suzuki K. Poulose
2015-10-16 17:06 ` Suzuki K. Poulose [this message]
2015-10-16 17:06 ` [PATCHv4 02/12] arm64: Handle section maps for swapper/idmap Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 03/12] arm64: Introduce helpers for page table levels Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 04/12] arm64: Calculate size for idmap_pg_dir at compile time Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 05/12] arm64: Handle 4 level page table for swapper Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 06/12] arm64: Clean config usages for page size Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 07/12] arm64: Simplify NR_FIX_BTMAPS calculation Suzuki K. Poulose
2015-10-16 18:50   ` Mark Rutland
2015-10-16 17:06 ` [PATCHv4 08/12] arm64: Kconfig: Fix help text about AArch32 support with 64K pages Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 09/12] arm64: Check for selected granule support Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 10/12] arm64: Add page size to the kernel image header Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 11/12] arm64: Add 16K page size support Suzuki K. Poulose
2015-10-16 17:06 ` [PATCHv4 12/12] arm64: 36 bit VA Suzuki K. Poulose
2015-10-16 17:25 ` [PATCHv4 00/12] arm64: 16K translation granule support Suzuki K. Poulose
2015-10-19 13:19 [UPDATED] " Suzuki K. Poulose
2015-10-19 13:19 ` [PATCHv4 01/12] arm64: Move swapper pagetable definitions Suzuki K. Poulose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445015181-29711-2-git-send-email-suzuki.poulose@arm.com \
    --to=suzuki.poulose@arm.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=chirstoff.dall@linaro.org \
    --cc=jeremy.linton@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=steve.capper@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).