From: Daniel Walker <danielwa@cisco.com>
To: dima.ruinskiy@intel.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Shannon Nelson <shannon.nelson@intel.com>,
Carolyn Wyborny <carolyn.wyborny@intel.com>,
Don Skidmore <donald.c.skidmore@intel.com>,
Bruce Allan <bruce.w.allan@intel.com>,
John Ronciak <john.ronciak@intel.com>,
Mitch Williams <mitch.a.williams@intel.com>
Cc: Steve Shih <sshih@cisco.com>,
xe-kernel@external.cisco.com, Daniel Walker <dwalker@fifo99.com>,
intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH -v2] drivers: net: ethernet: intel: e1000e: fix ethtool autoneg off for non-copper
Date: Tue, 5 Apr 2016 11:30:03 -0700 [thread overview]
Message-ID: <1459881004-13992-1-git-send-email-danielwa@cisco.com> (raw)
From: Steve Shih <sshih@cisco.com>
This patch fixes the issues for disabling auto-negotiation and forcing
speed and duplex settings for the non-copper media.
For non-copper media, e1000_get_settings should return ETH_TP_MDI_INVALID for
eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings
call would not fail with -EOPNOTSUPP.
e1000_set_spd_dplx should not automatically turn autoneg back on for forced
1000 Mbps full duplex settings for non-copper media.
Cc: xe-kernel@external.cisco.com
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Steve Shih <sshih@cisco.com>
---
drivers/net/ethernet/intel/e1000e/ethtool.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 6cab1f3..b6b8290 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -201,6 +201,9 @@ static int e1000_get_settings(struct net_device *netdev,
else
ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+ if (hw->phy.media_type != e1000_media_type_copper)
+ ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
+
return 0;
}
@@ -236,8 +239,12 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
mac->forced_speed_duplex = ADVERTISE_100_FULL;
break;
case SPEED_1000 + DUPLEX_FULL:
- mac->autoneg = 1;
- adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ if (adapter->hw.phy.media_type == e1000_media_type_copper) {
+ mac->autoneg = 1;
+ adapter->hw.phy.autoneg_advertised =
+ ADVERTISE_1000_FULL;
+ } else
+ mac->forced_speed_duplex = ADVERTISE_1000_FULL;
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
--
2.5.0
next reply other threads:[~2016-04-05 18:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-05 18:30 Daniel Walker [this message]
2016-04-09 1:03 ` [PATCH -v2] drivers: net: ethernet: intel: e1000e: fix ethtool autoneg off for non-copper Brown, Aaron F
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459881004-13992-1-git-send-email-danielwa@cisco.com \
--to=danielwa@cisco.com \
--cc=bruce.w.allan@intel.com \
--cc=carolyn.wyborny@intel.com \
--cc=dima.ruinskiy@intel.com \
--cc=donald.c.skidmore@intel.com \
--cc=dwalker@fifo99.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=john.ronciak@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mitch.a.williams@intel.com \
--cc=netdev@vger.kernel.org \
--cc=shannon.nelson@intel.com \
--cc=sshih@cisco.com \
--cc=xe-kernel@external.cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).