linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robert Love <rml@tech9.net>
To: davej@suse.de
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] 2.5-dj: configurable NR_CPUS
Date: 19 Jun 2002 17:45:19 -0700	[thread overview]
Message-ID: <1024533919.921.46.camel@sinai> (raw)

Dave,

Attached patch is a lovely rendition of the CONFIG_NR_CPUS patch Andrew
and I have been tossing around.

The patch allows the user to set a sane value for NR_CPUS at
compile-time if building an SMP kernel.  The benefits are saved cycles
and memory/object size reduction.

Further, this patch defines a per-arch default value for NR_CPUS thus
64-bit architectures can support a value of 64 instead of the current
global 32.

The patch is tested on i386 with various values for NR_CPUS.  Other
32-bit architectures will be fine with the default but may need minor
fixing of poor assumptions to boot with other values.  64-bit
architectures may need further fixing as I defaulted them to 64.

Patch is against 2.5.23-dj2.  Enjoy,

	Robert Love

diff -urN linux-2.5.23-dj2/arch/alpha/config.in linux/arch/alpha/config.in
--- linux-2.5.23-dj2/arch/alpha/config.in	Wed Jun 19 17:31:21 2002
+++ linux/arch/alpha/config.in	Wed Jun 19 17:26:35 2002
@@ -232,6 +232,7 @@
 
 if [ "$CONFIG_SMP" = "y" ]; then
    define_bool CONFIG_HAVE_DEC_LOCK y
+   int  'Maximum number of CPUs (2-64)' CONFIG_NR_CPUS 64
 fi
 
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
diff -urN linux-2.5.23-dj2/arch/i386/Config.help linux/arch/i386/Config.help
--- linux-2.5.23-dj2/arch/i386/Config.help	Wed Jun 19 17:32:33 2002
+++ linux/arch/i386/Config.help	Wed Jun 19 17:26:35 2002
@@ -25,6 +25,14 @@
 
   If you don't know what to do here, say N.
 
+CONFIG_NR_CPUS
+  This allows you to specify the maximum number of CPUs which this
+  kernel will support.  The maximum supported value is 32 and the
+  minimum value which makes sense is 2.
+
+  This is purely to save memory - each supported CPU adds
+  approximately eight kilobytes to the kernel image.
+
 CONFIG_PREEMPT
   This option reduces the latency of the kernel when reacting to
   real-time or interactive events by allowing a low priority process to
diff -urN linux-2.5.23-dj2/arch/i386/config.in linux/arch/i386/config.in
--- linux-2.5.23-dj2/arch/i386/config.in	Wed Jun 19 17:32:33 2002
+++ linux/arch/i386/config.in	Wed Jun 19 17:26:35 2002
@@ -164,6 +164,7 @@
       define_bool CONFIG_X86_IO_APIC y
    fi
 else
+   int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
    bool 'Multiquad NUMA system' CONFIG_MULTIQUAD
 fi
 
diff -urN linux-2.5.23-dj2/arch/i386/defconfig linux/arch/i386/defconfig
--- linux-2.5.23-dj2/arch/i386/defconfig	Wed Jun 19 17:32:33 2002
+++ linux/arch/i386/defconfig	Wed Jun 19 17:26:35 2002
@@ -74,6 +74,7 @@
 # CONFIG_PREEMPT is not set
 # CONFIG_MULTIQUAD is not set
 CONFIG_HAVE_DEC_LOCK=y
+CONFIG_NR_CPUS=32
 
 #
 # General options
diff -urN linux-2.5.23-dj2/arch/ia64/config.in linux/arch/ia64/config.in
--- linux-2.5.23-dj2/arch/ia64/config.in	Wed Jun 19 17:32:34 2002
+++ linux/arch/ia64/config.in	Wed Jun 19 17:26:35 2002
@@ -95,6 +95,10 @@
 tristate '/proc/pal support' CONFIG_IA64_PALINFO
 tristate '/proc/efi/vars support' CONFIG_EFI_VARS
 
+if [ "$CONFIG_SMP" = "y" ]; then
+   int  'Maximum number of CPUs (2-64)' CONFIG_NR_CPUS 64
+fi
+
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 
diff -urN linux-2.5.23-dj2/arch/ia64/defconfig linux/arch/ia64/defconfig
--- linux-2.5.23-dj2/arch/ia64/defconfig	Wed Jun 19 17:31:23 2002
+++ linux/arch/ia64/defconfig	Wed Jun 19 17:26:35 2002
@@ -61,6 +61,7 @@
 CONFIG_EFI_VARS=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_NR_CPUS=64
 
 #
 # ACPI Support
diff -urN linux-2.5.23-dj2/arch/mips/config.in linux/arch/mips/config.in
--- linux-2.5.23-dj2/arch/mips/config.in	Wed Jun 19 17:32:34 2002
+++ linux/arch/mips/config.in	Wed Jun 19 17:26:35 2002
@@ -501,6 +501,8 @@
 bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
 if [ "$CONFIG_SMP" != "y" ]; then
    bool 'Run uncached' CONFIG_MIPS_UNCACHED
+else
+   int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
 fi
 endmenu
 
diff -urN linux-2.5.23-dj2/arch/mips64/config.in linux/arch/mips64/config.in
--- linux-2.5.23-dj2/arch/mips64/config.in	Wed Jun 19 17:32:34 2002
+++ linux/arch/mips64/config.in	Wed Jun 19 17:26:35 2002
@@ -248,6 +248,8 @@
 bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
 if [ "$CONFIG_SMP" != "y" ]; then
    bool 'Run uncached' CONFIG_MIPS_UNCACHED
+else
+   int  'Maximum number of CPUs (2-64)' CONFIG_NR_CPUS 64
 fi
 endmenu
 
diff -urN linux-2.5.23-dj2/arch/mips64/defconfig linux/arch/mips64/defconfig
--- linux-2.5.23-dj2/arch/mips64/defconfig	Wed Jun 19 17:31:25 2002
+++ linux/arch/mips64/defconfig	Wed Jun 19 17:26:35 2002
@@ -32,6 +32,7 @@
 # CONFIG_EISA is not set
 # CONFIG_MCA is not set
 # CONFIG_SBUS is not set
+CONFIG_NR_CPUS=64
 
 #
 # CPU selection
diff -urN linux-2.5.23-dj2/arch/parisc/config.in linux/arch/parisc/config.in
--- linux-2.5.23-dj2/arch/parisc/config.in	Wed Jun 19 17:32:34 2002
+++ linux/arch/parisc/config.in	Wed Jun 19 17:26:35 2002
@@ -18,6 +18,10 @@
 # bool 'Symmetric multi-processing support' CONFIG_SMP
 define_bool CONFIG_SMP n
 
+if [ "$CONFIG_SMP" = "y" ]; then
+   int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
+fi
+
 bool 'Kernel Debugger support' CONFIG_KWDB
 # define_bool CONFIG_KWDB n
 
diff -urN linux-2.5.23-dj2/arch/ppc/config.in linux/arch/ppc/config.in
--- linux-2.5.23-dj2/arch/ppc/config.in	Wed Jun 19 17:31:16 2002
+++ linux/arch/ppc/config.in	Wed Jun 19 17:26:35 2002
@@ -172,6 +172,7 @@
 bool 'Symmetric multi-processing support' CONFIG_SMP
 if [ "$CONFIG_SMP" = "y" ]; then
    bool '  Distribute interrupts on all CPUs by default' CONFIG_IRQ_ALL_CPUS
+   int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
 fi
 if [ "$CONFIG_SMP" != "y" ]; then
    bool 'Preemptible Kernel' CONFIG_PREEMPT
diff -urN linux-2.5.23-dj2/arch/ppc64/config.in linux/arch/ppc64/config.in
--- linux-2.5.23-dj2/arch/ppc64/config.in	Wed Jun 19 17:31:23 2002
+++ linux/arch/ppc64/config.in	Wed Jun 19 17:26:35 2002
@@ -21,6 +21,7 @@
 bool 'Symmetric multi-processing support' CONFIG_SMP
 if [ "$CONFIG_SMP" = "y" ]; then
   bool '  Distribute interrupts on all CPUs by default' CONFIG_IRQ_ALL_CPUS
+  int  'Maximum number of CPUs (2-64)' CONFIG_NR_CPUS 64
   if [ "$CONFIG_PPC_PSERIES" = "y" ]; then
     bool '  Hardware multithreading' CONFIG_HMT
   fi
diff -urN linux-2.5.23-dj2/arch/ppc64/defconfig linux/arch/ppc64/defconfig
--- linux-2.5.23-dj2/arch/ppc64/defconfig	Wed Jun 19 17:31:23 2002
+++ linux/arch/ppc64/defconfig	Wed Jun 19 17:26:35 2002
@@ -38,6 +38,7 @@
 CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_HMT is not set
 # CONFIG_PREEMPT is not set
+CONFIG_NR_CPUS=64
 
 #
 # General setup
diff -urN linux-2.5.23-dj2/arch/s390/config.in linux/arch/s390/config.in
--- linux-2.5.23-dj2/arch/s390/config.in	Wed Jun 19 17:31:26 2002
+++ linux/arch/s390/config.in	Wed Jun 19 17:26:35 2002
@@ -20,6 +20,9 @@
 comment 'Processor type and features'
 bool 'Symmetric multi-processing support' CONFIG_SMP
 bool 'IEEE FPU emulation' CONFIG_MATHEMU
+if [ "$CONFIG_SMP" = "y" ]; then
+   int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
+fi
 endmenu
 
 mainmenu_option next_comment
diff -urN linux-2.5.23-dj2/arch/s390/defconfig linux/arch/s390/defconfig
--- linux-2.5.23-dj2/arch/s390/defconfig	Wed Jun 19 17:31:26 2002
+++ linux/arch/s390/defconfig	Wed Jun 19 17:26:35 2002
@@ -35,6 +35,7 @@
 #
 CONFIG_SMP=y
 CONFIG_MATHEMU=y
+CONFIG_NR_CPUS=64
 
 #
 # Base setup
diff -urN linux-2.5.23-dj2/arch/s390x/config.in linux/arch/s390x/config.in
--- linux-2.5.23-dj2/arch/s390x/config.in	Wed Jun 19 17:31:25 2002
+++ linux/arch/s390x/config.in	Wed Jun 19 17:26:35 2002
@@ -19,6 +19,9 @@
 mainmenu_option next_comment
 comment 'Processor type and features'
 bool 'Symmetric multi-processing support' CONFIG_SMP
+if [ "$CONFIG_SMP" = "y" ]; then
+   int  'Maximum number of CPUs (2-64)' CONFIG_NR_CPUS 64
+fi
 bool 'Kernel support for 31 bit emulation' CONFIG_S390_SUPPORT
 if [ "$CONFIG_S390_SUPPORT" = "y" ]; then
   tristate 'Kernel support for 31 bit ELF binaries' CONFIG_BINFMT_ELF32 
diff -urN linux-2.5.23-dj2/arch/s390x/defconfig linux/arch/s390x/defconfig
--- linux-2.5.23-dj2/arch/s390x/defconfig	Wed Jun 19 17:31:25 2002
+++ linux/arch/s390x/defconfig	Wed Jun 19 17:26:35 2002
@@ -36,6 +36,7 @@
 CONFIG_SMP=y
 CONFIG_S390_SUPPORT=y
 CONFIG_BINFMT_ELF32=y
+CONFIG_NR_CPUS=64
 
 #
 # Base setup
diff -urN linux-2.5.23-dj2/arch/sparc/config.in linux/arch/sparc/config.in
--- linux-2.5.23-dj2/arch/sparc/config.in	Wed Jun 19 17:31:21 2002
+++ linux/arch/sparc/config.in	Wed Jun 19 17:26:35 2002
@@ -17,6 +17,10 @@
 
 bool 'Symmetric multi-processing support (does not work on sun4/sun4c)' CONFIG_SMP
 
+if [ "$CONFIG_SMP" = "y" ]; then
+   int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
+fi
+
 # Identify this as a Sparc32 build
 define_bool CONFIG_SPARC32 y
 
diff -urN linux-2.5.23-dj2/arch/sparc64/config.in linux/arch/sparc64/config.in
--- linux-2.5.23-dj2/arch/sparc64/config.in	Wed Jun 19 17:32:35 2002
+++ linux/arch/sparc64/config.in	Wed Jun 19 17:26:35 2002
@@ -17,6 +17,10 @@
 bool 'Symmetric multi-processing support' CONFIG_SMP
 bool 'Preemptible kernel' CONFIG_PREEMPT
 
+if [ "$CONFIG_SMP" = "y" ]; then
+   int  'Maximum number of CPUs (2-64)' CONFIG_NR_CPUS 64
+fi
+
 # Identify this as a Sparc64 build
 define_bool CONFIG_SPARC64 y
 
diff -urN linux-2.5.23-dj2/arch/sparc64/defconfig linux/arch/sparc64/defconfig
--- linux-2.5.23-dj2/arch/sparc64/defconfig	Wed Jun 19 17:32:35 2002
+++ linux/arch/sparc64/defconfig	Wed Jun 19 17:26:35 2002
@@ -63,6 +63,7 @@
 CONFIG_BINFMT_MISC=m
 # CONFIG_SUNOS_EMUL is not set
 CONFIG_SOLARIS_EMUL=m
+CONFIG_NR_CPUS=64
 
 #
 # Parallel port support
diff -urN linux-2.5.23-dj2/arch/x86_64/config.in linux/arch/x86_64/config.in
--- linux-2.5.23-dj2/arch/x86_64/config.in	Wed Jun 19 17:31:25 2002
+++ linux/arch/x86_64/config.in	Wed Jun 19 17:29:25 2002
@@ -54,6 +54,7 @@
 fi
 if [ "$CONFIG_SMP" = "y" ]; then
     define_bool CONFIG_HAVE_DEC_LOCK y
+    int  'Maximum number of CPUs (2-64)' CONFIG_NR_CPUS 64
 fi
 
 define_bool CONFIG_X86_MCE y
diff -urN linux-2.5.23-dj2/arch/x86_64/defconfig linux/arch/x86_64/defconfig
--- linux-2.5.23-dj2/arch/x86_64/defconfig	Wed Jun 19 17:31:25 2002
+++ linux/arch/x86_64/defconfig	Wed Jun 19 17:26:35 2002
@@ -51,6 +51,7 @@
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_X86_MCE=y
 # CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_NR_CPUS=64
 
 #
 # Power management options
diff -urN linux-2.5.23-dj2/include/linux/threads.h linux/include/linux/threads.h
--- linux-2.5.23-dj2/include/linux/threads.h	Wed Jun 19 17:31:07 2002
+++ linux/include/linux/threads.h	Wed Jun 19 17:26:35 2002
@@ -8,10 +8,16 @@
  * /proc/sys/kernel/threads-max.
  */
  
+/*
+ * Maximum supported processors that can run under SMP.  This value is
+ * set via configure setting.  The maximum is equal to the size of the
+ * bitmasks used on that platform, i.e. 32 or 64.  Setting this smaller
+ * saves quite a bit of memory.
+ */
 #ifdef CONFIG_SMP
-#define NR_CPUS	32		/* Max processors that can be running in SMP */
+#define NR_CPUS		CONFIG_NR_CPUS
 #else
-#define NR_CPUS 1
+#define NR_CPUS		1
 #endif
 
 #define MIN_THREADS_LEFT_FOR_ROOT 4


             reply	other threads:[~2002-06-20  0:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-06-20  0:45 Robert Love [this message]
2002-06-20 16:00 ` [PATCH] 2.5-dj: configurable NR_CPUS J.A. Magallon
2002-06-20 16:37   ` Robert Love
2002-06-20 16:41     ` J.A. Magallon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1024533919.921.46.camel@sinai \
    --to=rml@tech9.net \
    --cc=davej@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).