[PATCH v3 1/2] mfd: mt6397: irq domain should initialize before mfd_add_devices()

From: Henry Chen <henryc.chen@mediatek.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
	John Crispin <blogic@openwrt.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Flora Fu <flora.fu@mediatek.com>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	Henry Chen <henryc.chen@mediatek.com>
Subject: [PATCH v3 1/2] mfd: mt6397: irq domain should initialize before mfd_add_devices()
Date: Fri, 15 Apr 2016 16:30:29 +0800	[thread overview]
Message-ID: <1460709030-23820-1-git-send-email-henryc.chen@mediatek.com> (raw)

Some sub driver like RTC module need irq domain from parent to create
irq mapping when driver initialize. so move mt6397_irq_init() before
mfd_add_devices().

Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
---
This series fixed the below warning based on "Linux kernel v4.6-rc1"
WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471
irq_create_mapping+0xc4/0xd0
 
Changes in V2: Add two patch for error handle checking.
Changes in V3: Add interrupt as required properties to dt-bindings doc
---
 drivers/mfd/mt6397-core.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 8e8d932..b2faf56 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -267,15 +267,23 @@ static int mt6397_probe(struct platform_device *pdev)
 	ret = regmap_read(pmic->regmap, MT6397_CID, &id);
 	if (ret) {
 		dev_err(pmic->dev, "Failed to read chip id: %d\n", ret);
-		goto fail_irq;
+		return ret;
 	}
 
+	pmic->irq = platform_get_irq(pdev, 0);
+	if (pmic->irq <= 0)
+		return pmic->irq;
+
 	switch (id & 0xff) {
 	case MT6323_CID_CODE:
 		pmic->int_con[0] = MT6323_INT_CON0;
 		pmic->int_con[1] = MT6323_INT_CON1;
 		pmic->int_status[0] = MT6323_INT_STATUS0;
 		pmic->int_status[1] = MT6323_INT_STATUS1;
+		ret = mt6397_irq_init(pmic);
+		if (ret)
+			return ret;
+
 		ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs,
 				ARRAY_SIZE(mt6323_devs), NULL, 0, NULL);
 		break;
@@ -286,6 +294,10 @@ static int mt6397_probe(struct platform_device *pdev)
 		pmic->int_con[1] = MT6397_INT_CON1;
 		pmic->int_status[0] = MT6397_INT_STATUS0;
 		pmic->int_status[1] = MT6397_INT_STATUS1;
+		ret = mt6397_irq_init(pmic);
+		if (ret)
+			return ret;
+
 		ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
 				ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
 		break;
@@ -296,14 +308,6 @@ static int mt6397_probe(struct platform_device *pdev)
 		break;
 	}
 
-	pmic->irq = platform_get_irq(pdev, 0);
-	if (pmic->irq > 0) {
-		ret = mt6397_irq_init(pmic);
-		if (ret)
-			return ret;
-	}
-
-fail_irq:
 	if (ret) {
 		irq_domain_remove(pmic->irq_domain);
 		dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);
-- 
1.8.1.1.dirty
