From: Vinay Simha BN <simhavcs@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vinay Simha BN <simhavcs@gmail.com>,
Thierry Reding <thierry.reding@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
dri-devel@lists.freedesktop.org (open list:DRM PANEL DRIVERS),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings
Date: Wed, 20 Apr 2016 15:02:31 +0530 [thread overview]
Message-ID: <1461144755-10633-2-git-send-email-simhavcs@gmail.com> (raw)
In-Reply-To: <1461144755-10633-1-git-send-email-simhavcs@gmail.com>
Add documentation for lt070me05000 panel
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
---
.../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..ffe0550
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,43 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- power-supply: phandle of the regulator that provides the supply voltage
+ IOVCC , power supply for LCM (1.8V)
+- vddp-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply (3-5V)
+- dcdc_en-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply enable, High active
+- reset-gpio: phandle of gpio for reset line
+ This should be 8mA, gpio can be configured using mux and pinctrl.
+ XRES, Reset, Low active
+- enable-gpio: phandle of gpio for enable line
+ LED_EN, LED backlight enable, High active
+- vcc-gpio: phandle of regulator/gpio that provides the supply voltage
+ VDD, LED power supply (3-5V)
+
+Optional properties:
+- pwm-gpio: phandle of gpio/pwm
+ pwm backlight control, this should be mapped to the backlight level
+ display brightness (0x51)
+
+Example:
+
+ dsi0: qcom,mdss_dsi@4700000 {
+ panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dsi_panel_pinctrl>;
+
+ power-supply = <&pm8921_lvs5>;
+ vddp-supply = <&pm8921_l17>;
+ dcdc_en-supply = <&pm8921_lvs7>;
+
+ reset-gpio = <&tlmm_pinmux 54 0>;
+ enable-gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+ vcc-gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+ pwm-gpio = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.1.2
next prev parent reply other threads:[~2016-04-20 9:33 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-13 6:28 [PATCH] drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel Vinay Simha BN
2016-04-13 13:49 ` Thierry Reding
2016-04-14 12:38 ` Vinay Simha
2016-04-20 9:42 ` Vinay Simha
2016-04-14 10:47 ` [RESEND][PATCH] " Vinay Simha BN
2016-04-14 17:15 ` Rob Herring
2016-04-20 9:32 ` [PATCH v2 1/4] dt-bindings: Add jdi panel vendor Vinay Simha BN
2016-04-20 9:32 ` Vinay Simha BN [this message]
2016-04-21 15:45 ` [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Rob Herring
2016-04-22 6:55 ` Vinay Simha
2016-04-22 11:59 ` Thierry Reding
2016-04-20 9:32 ` [PATCH v2 3/4] drm/dsi: Implement set tear scanline Vinay Simha BN
2016-04-20 9:53 ` kbuild test robot
2016-04-20 10:24 ` [PATCH v3] drm/dsi: Implement set tear scanline compile fix Vinay Simha BN
2016-04-20 9:32 ` [PATCH v2 4/4] drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel Vinay Simha BN
2016-04-21 15:33 ` [PATCH v2 1/4] dt-bindings: Add jdi panel vendor Rob Herring
2016-04-14 14:40 ` [PATCH] drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel Archit Taneja
2016-04-20 9:46 ` Vinay Simha
2016-07-13 16:44 [PATCH 1/4] dt-bindings: Add Japan Display Inc vendor id Vinay Simha BN
2016-07-13 16:44 ` [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Vinay Simha BN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461144755-10633-2-git-send-email-simhavcs@gmail.com \
--to=simhavcs@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).