[v3,3/3] leds: gpio: Support the "panic-indicator" firmware property
diff mbox series

Message ID 1461881020-13964-4-git-send-email-ezequiel@vanguardiasur.com.ar
State New, archived
Headers show
Series
  • Extend the LED panic trigger
Related show

Commit Message

Ezequiel Garcia April 28, 2016, 10:03 p.m. UTC
Calling a GPIO LEDs is quite likely to work even if the kernel
has paniced, so they are ideal to blink in this situation.
This commit adds support for the new "panic-indicator"
firmware property, allowing to mark a given LED to blink on
a kernel panic.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
---
 Documentation/devicetree/bindings/leds/leds-gpio.txt | 2 ++
 drivers/leds/leds-gpio.c                             | 4 ++++
 include/linux/leds.h                                 | 1 +
 3 files changed, 7 insertions(+)

Comments

Rob Herring May 3, 2016, 4:53 p.m. UTC | #1
On Thu, Apr 28, 2016 at 07:03:40PM -0300, Ezequiel Garcia wrote:
> Calling a GPIO LEDs is quite likely to work even if the kernel
> has paniced, so they are ideal to blink in this situation.
> This commit adds support for the new "panic-indicator"
> firmware property, allowing to mark a given LED to blink on
> a kernel panic.
> 
> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
> ---
>  Documentation/devicetree/bindings/leds/leds-gpio.txt | 2 ++

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/leds/leds-gpio.c                             | 4 ++++
>  include/linux/leds.h                                 | 1 +
>  3 files changed, 7 insertions(+)

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index fea1ebfe24a9..cbbeb1850910 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -23,6 +23,8 @@  LED sub-node properties:
   property is not present.
 - retain-state-suspended: (optional) The suspend state can be retained.Such
   as charge-led gpio.
+- panic-indicator : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
 
 Examples:
 
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 61143f55597e..8229f063b483 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -127,6 +127,8 @@  static int create_gpio_led(const struct gpio_led *template,
 	led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
 	if (!template->retain_state_suspended)
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+	if (template->panic_indicator)
+		led_dat->cdev.flags |= LED_PANIC_INDICATOR;
 
 	ret = gpiod_direction_output(led_dat->gpiod, state);
 	if (ret < 0)
@@ -200,6 +202,8 @@  static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
 
 		if (fwnode_property_present(child, "retain-state-suspended"))
 			led.retain_state_suspended = 1;
+		if (fwnode_property_present(child, "panic-indicator"))
+			led.panic_indicator = 1;
 
 		ret = create_gpio_led(&led, &priv->leds[priv->num_leds],
 				      dev, NULL);
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 7e9fb00e15e8..d2b13066e781 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -365,6 +365,7 @@  struct gpio_led {
 	unsigned 	gpio;
 	unsigned	active_low : 1;
 	unsigned	retain_state_suspended : 1;
+	unsigned	panic_indicator : 1;
 	unsigned	default_state : 2;
 	/* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
 	struct gpio_desc *gpiod;