From: Lijun Ou <oulijun@huawei.com>
To: <dledford@redhat.com>, <sean.hefty@intel.com>,
<hal.rosenstock@gmail.com>, <davem@davemloft.net>,
<jeffrey.t.kirsher@intel.com>, <jiri@mellanox.com>,
<ogerlitz@mellanox.com>
Cc: <linux-rdma@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<netdev@vger.kernel.org>, <gongyangming@huawei.com>,
<xiaokun@huawei.com>, <tangchaofei@huawei.com>,
<oulijun@huawei.com>, <haifeng.wei@huawei.com>,
<yisen.zhuang@huawei.com>, <yankejian@huawei.com>,
<charles.chenxin@huawei.com>, <linuxarm@huawei.com>
Subject: [PATCH v7 01/21] net: hns: Add reset function support for RoCE driver
Date: Wed, 4 May 2016 20:20:58 +0800 [thread overview]
Message-ID: <1462364478-10808-2-git-send-email-oulijun@huawei.com> (raw)
In-Reply-To: <1462364478-10808-1-git-send-email-oulijun@huawei.com>
It added reset function for RoCE driver. RoCE is a feature of hns.
In hip06 SoC, in RoCE reset process, it's needed to configure dsaf
channel reset, port and sl map info. Reset function of RoCE is
located in dsaf module, we only call it in RoCE driver when needed.
Signed-off-by: Wei Hu <xavier.huwei@huawei.com>
Signed-off-by: Nenglong Zhao <zhaonenglong@hisilicon.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Sheng Li <lisheng011@huawei.com>
---
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 90 +++++++++++++++++++++-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h | 32 +++++++-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 64 ++++++++++++---
drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h | 16 +++-
4 files changed, 186 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index 5978a5c..2f33d4a 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -1219,9 +1220,9 @@ static int hns_dsaf_init_hw(struct dsaf_device *dsaf_dev)
dev_dbg(dsaf_dev->dev,
"hns_dsaf_init_hw begin %s !\n", dsaf_dev->ae_dev.name);
- hns_dsaf_rst(dsaf_dev, 0);
+ hns_dsaf_rst(dsaf_dev, false);
mdelay(10);
- hns_dsaf_rst(dsaf_dev, 1);
+ hns_dsaf_rst(dsaf_dev, true);
hns_dsaf_comm_init(dsaf_dev);
@@ -1249,7 +1250,7 @@ static int hns_dsaf_init_hw(struct dsaf_device *dsaf_dev)
static void hns_dsaf_remove_hw(struct dsaf_device *dsaf_dev)
{
/*reset*/
- hns_dsaf_rst(dsaf_dev, 0);
+ hns_dsaf_rst(dsaf_dev, false);
}
/**
@@ -2594,6 +2595,89 @@ static struct platform_driver g_dsaf_driver = {
module_platform_driver(g_dsaf_driver);
+/**
+ * hns_dsaf_roce_reset - reset dsaf and roce
+ * @dsaf_fwnode: Pointer to framework node for the dasf
+ * @enable: false - request reset , true - drop reset
+ * retuen 0 - success , negative -fail
+ */
+int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool enable)
+{
+ struct dsaf_device *dsaf_dev;
+ struct platform_device *pdev;
+ unsigned int mp;
+ unsigned int sl;
+ unsigned int credit;
+ int i;
+ const u32 port_map[DSAF_ROCE_CREDIT_CHN][DSAF_ROCE_CHAN_MODE_NUM] = {
+ {DSAF_ROCE_PORT_0, DSAF_ROCE_PORT_0, DSAF_ROCE_PORT_0},
+ {DSAF_ROCE_PORT_1, DSAF_ROCE_PORT_0, DSAF_ROCE_PORT_0},
+ {DSAF_ROCE_PORT_2, DSAF_ROCE_PORT_1, DSAF_ROCE_PORT_0},
+ {DSAF_ROCE_PORT_3, DSAF_ROCE_PORT_1, DSAF_ROCE_PORT_0},
+ {DSAF_ROCE_PORT_4, DSAF_ROCE_PORT_2, DSAF_ROCE_PORT_1},
+ {DSAF_ROCE_PORT_4, DSAF_ROCE_PORT_2, DSAF_ROCE_PORT_1},
+ {DSAF_ROCE_PORT_5, DSAF_ROCE_PORT_3, DSAF_ROCE_PORT_1},
+ {DSAF_ROCE_PORT_5, DSAF_ROCE_PORT_3, DSAF_ROCE_PORT_1},
+ };
+ const u32 sl_map[DSAF_ROCE_CREDIT_CHN][DSAF_ROCE_CHAN_MODE_NUM] = {
+ {DSAF_ROCE_SL_0, DSAF_ROCE_SL_0, DSAF_ROCE_SL_0},
+ {DSAF_ROCE_SL_0, DSAF_ROCE_SL_1, DSAF_ROCE_SL_1},
+ {DSAF_ROCE_SL_0, DSAF_ROCE_SL_0, DSAF_ROCE_SL_2},
+ {DSAF_ROCE_SL_0, DSAF_ROCE_SL_1, DSAF_ROCE_SL_3},
+ {DSAF_ROCE_SL_0, DSAF_ROCE_SL_0, DSAF_ROCE_SL_0},
+ {DSAF_ROCE_SL_1, DSAF_ROCE_SL_1, DSAF_ROCE_SL_1},
+ {DSAF_ROCE_SL_0, DSAF_ROCE_SL_0, DSAF_ROCE_SL_2},
+ {DSAF_ROCE_SL_1, DSAF_ROCE_SL_1, DSAF_ROCE_SL_3},
+ };
+
+ if (!is_of_node(dsaf_fwnode)) {
+ pr_err("hisi_dsaf: Only support DT node!\n");
+ return -EINVAL;
+ }
+ pdev = of_find_device_by_node(to_of_node(dsaf_fwnode));
+ dsaf_dev = dev_get_drvdata(&pdev->dev);
+ if (AE_IS_VER1(dsaf_dev->dsaf_ver)) {
+ dev_err(dsaf_dev->dev, "%s v1 chip do not support roce!\n",
+ dsaf_dev->ae_dev.name);
+ return -ENODEV;
+ }
+
+ if (!enable) {
+ /* Reset rocee-channels in dsaf and rocee */
+ hns_dsaf_srst_chns(dsaf_dev, DSAF_CHNS_MASK, false);
+ hns_dsaf_roce_srst(dsaf_dev, false);
+ } else {
+ /* Configure dsaf tx roce correspond to port map and sl map */
+ mp = dsaf_read_dev(dsaf_dev, DSAF_ROCE_PORT_MAP_REG);
+ for (i = 0; i < DSAF_ROCE_CREDIT_CHN; i++)
+ dsaf_set_field(mp, 7 << i * 3, i * 3,
+ port_map[i][DSAF_ROCE_6PORT_MODE]);
+ dsaf_set_field(mp, 3 << i * 3, i * 3, 0);
+ dsaf_write_dev(dsaf_dev, DSAF_ROCE_PORT_MAP_REG, mp);
+
+ sl = dsaf_read_dev(dsaf_dev, DSAF_ROCE_SL_MAP_REG);
+ for (i = 0; i < DSAF_ROCE_CREDIT_CHN; i++)
+ dsaf_set_field(sl, 3 << i * 2, i * 2,
+ sl_map[i][DSAF_ROCE_6PORT_MODE]);
+ dsaf_write_dev(dsaf_dev, DSAF_ROCE_SL_MAP_REG, sl);
+
+ /* De-reset rocee-channels in dsaf and rocee */
+ hns_dsaf_srst_chns(dsaf_dev, DSAF_CHNS_MASK, true);
+ msleep(20);
+ hns_dsaf_roce_srst(dsaf_dev, true);
+
+ /* Eanble dsaf channel rocee credit */
+ credit = dsaf_read_dev(dsaf_dev, DSAF_SBM_ROCEE_CFG_REG_REG);
+ dsaf_set_bit(credit, DSAF_SBM_ROCEE_CFG_CRD_EN_B, 0);
+ dsaf_write_dev(dsaf_dev, DSAF_SBM_ROCEE_CFG_REG_REG, credit);
+
+ dsaf_set_bit(credit, DSAF_SBM_ROCEE_CFG_CRD_EN_B, 1);
+ dsaf_write_dev(dsaf_dev, DSAF_SBM_ROCEE_CFG_REG_REG, credit);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(hns_dsaf_roce_reset);
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Huawei Tech. Co., Ltd.");
MODULE_DESCRIPTION("HNS DSAF driver");
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
index 5fea226..25e4bb1 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
@@ -40,6 +40,32 @@ struct hns_mac_cb;
#define DSAF_DUMP_REGS_NUM 504
#define DSAF_STATIC_NUM 28
+#define DSAF_ROCE_CREDIT_CHN 8
+#define DSAF_ROCE_CHAN_MODE 3
+
+enum dsaf_roce_port_mode {
+ DSAF_ROCE_6PORT_MODE,
+ DSAF_ROCE_4PORT_MODE,
+ DSAF_ROCE_2PORT_MODE,
+ DSAF_ROCE_CHAN_MODE_NUM,
+};
+
+enum dsaf_roce_port_num {
+ DSAF_ROCE_PORT_0 = 0,
+ DSAF_ROCE_PORT_1 = 1,
+ DSAF_ROCE_PORT_2 = 2,
+ DSAF_ROCE_PORT_3 = 3,
+ DSAF_ROCE_PORT_4 = 4,
+ DSAF_ROCE_PORT_5 = 5,
+};
+
+enum dsaf_roce_qos_sl {
+ DSAF_ROCE_SL_0 = 0,
+ DSAF_ROCE_SL_1 = 1,
+ DSAF_ROCE_SL_2 = 2,
+ DSAF_ROCE_SL_3 = 3,
+};
+
#define DSAF_STATS_READ(p, offset) (*((u64 *)((u8 *)(p) + (offset))))
enum hal_dsaf_mode {
@@ -392,7 +418,7 @@ int hns_dsaf_get_mac_entry_by_index(
u16 entry_index,
struct dsaf_drv_mac_multi_dest_entry *mac_entry);
-void hns_dsaf_rst(struct dsaf_device *dsaf_dev, u32 val);
+void hns_dsaf_rst(struct dsaf_device *dsaf_dev, bool enable);
void hns_ppe_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val);
@@ -400,6 +426,10 @@ void hns_ppe_com_srst(struct ppe_common_cb *ppe_common, u32 val);
void hns_dsaf_fix_mac_mode(struct hns_mac_cb *mac_cb);
+void hns_dsaf_srst_chns(struct dsaf_device *dsaf_dev, u32 msk, bool enable);
+
+void hns_dsaf_roce_srst(struct dsaf_device *dsaf_dev, bool enable);
+
int hns_dsaf_ae_init(struct dsaf_device *dsaf_dev);
void hns_dsaf_ae_uninit(struct dsaf_device *dsaf_dev);
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
index e69b022..2b33120 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
@@ -82,23 +82,27 @@ int cpld_set_led_id(struct hns_mac_cb *mac_cb,
#define RESET_REQ_OR_DREQ 1
-void hns_dsaf_rst(struct dsaf_device *dsaf_dev, u32 val)
+void hns_dsaf_rst(struct dsaf_device *dsaf_dev, bool enable)
{
u32 xbar_reg_addr;
u32 nt_reg_addr;
- if (!val) {
- xbar_reg_addr = DSAF_SUB_SC_XBAR_RESET_REQ_REG;
- nt_reg_addr = DSAF_SUB_SC_NT_RESET_REQ_REG;
+ if (AE_IS_VER1(dsaf_dev->dsaf_ver)) {
+ if (!enable) {
+ xbar_reg_addr = DSAF_SUB_SC_XBAR_RESET_REQ_REG;
+ nt_reg_addr = DSAF_SUB_SC_NT_RESET_REQ_REG;
+ } else {
+ xbar_reg_addr = DSAF_SUB_SC_XBAR_RESET_DREQ_REG;
+ nt_reg_addr = DSAF_SUB_SC_NT_RESET_DREQ_REG;
+ }
+
+ dsaf_write_reg(dsaf_dev->sc_base, xbar_reg_addr,
+ RESET_REQ_OR_DREQ);
+ dsaf_write_reg(dsaf_dev->sc_base, nt_reg_addr,
+ RESET_REQ_OR_DREQ);
} else {
- xbar_reg_addr = DSAF_SUB_SC_XBAR_RESET_DREQ_REG;
- nt_reg_addr = DSAF_SUB_SC_NT_RESET_DREQ_REG;
+ hns_dsaf_srst_chns(dsaf_dev, 0xfffff, enable);
}
-
- dsaf_write_reg(dsaf_dev->sc_base, xbar_reg_addr,
- RESET_REQ_OR_DREQ);
- dsaf_write_reg(dsaf_dev->sc_base, nt_reg_addr,
- RESET_REQ_OR_DREQ);
}
void hns_dsaf_xge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
@@ -139,6 +143,44 @@ void hns_dsaf_xge_core_srst_by_port(struct dsaf_device *dsaf_dev,
dsaf_write_reg(dsaf_dev->sc_base, reg_addr, reg_val);
}
+/**
+ * hns_dsaf_srst_chns - reset dsaf channels
+ * @dsaf_dev: dsaf device struct pointer
+ * @msk: xbar channels mask value:
+ * bit0-5 for xge0-5
+ * bit6-11 for ppe0-5
+ * bit12-17 for roce0-5
+ * bit18-19 for com/dfx
+ * @enable: false - request reset , true - drop reset
+ */
+void hns_dsaf_srst_chns(struct dsaf_device *dsaf_dev, u32 msk, bool enable)
+{
+ u32 reg_addr;
+
+ if (!enable)
+ reg_addr = DSAF_SUB_SC_DSAF_RESET_REQ_REG;
+ else
+ reg_addr = DSAF_SUB_SC_DSAF_RESET_DREQ_REG;
+
+ dsaf_write_reg(dsaf_dev->sc_base, reg_addr, msk);
+}
+
+void hns_dsaf_roce_srst(struct dsaf_device *dsaf_dev, bool enable)
+{
+ if (!enable) {
+ dsaf_write_reg(dsaf_dev->sc_base,
+ DSAF_SUB_SC_ROCEE_RESET_REQ_REG, 1);
+ } else {
+ dsaf_write_reg(dsaf_dev->sc_base,
+ DSAF_SUB_SC_ROCEE_CLK_DIS_REG, 1);
+ dsaf_write_reg(dsaf_dev->sc_base,
+ DSAF_SUB_SC_ROCEE_RESET_DREQ_REG, 1);
+ msleep(20);
+ dsaf_write_reg(dsaf_dev->sc_base,
+ DSAF_SUB_SC_ROCEE_CLK_EN_REG, 1);
+ }
+}
+
void hns_dsaf_ge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
{
u32 reg_val_1;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
index 7d7204f..8f1b18e 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
@@ -37,6 +37,7 @@
#define DSAFV2_SBM_NUM 8
#define DSAFV2_SBM_XGE_CHN 6
#define DSAFV2_SBM_PPE_CHN 1
+#define DSAFV2_SBM_ROCE_CHN 1
#define DASFV2_ROCEE_CRD_NUM 8
#define DSAF_VOQ_NUM DSAF_NODE_NUM
@@ -82,6 +83,12 @@
#define DSAF_SUB_SC_PPE_RESET_DREQ_REG 0xA4C
#define DSAF_SUB_SC_RCB_PPE_COM_RESET_REQ_REG 0xA88
#define DSAF_SUB_SC_RCB_PPE_COM_RESET_DREQ_REG 0xA8C
+#define DSAF_SUB_SC_DSAF_RESET_REQ_REG 0xAA8
+#define DSAF_SUB_SC_ROCEE_RESET_REQ_REG 0xA50
+#define DSAF_SUB_SC_DSAF_RESET_DREQ_REG 0xAAC
+#define DSAF_SUB_SC_ROCEE_CLK_DIS_REG 0x32C
+#define DSAF_SUB_SC_ROCEE_RESET_DREQ_REG 0xA54
+#define DSAF_SUB_SC_ROCEE_CLK_EN_REG 0x328
#define DSAF_SUB_SC_LIGHT_MODULE_DETECT_EN_REG 0x2060
#define DSAF_SUB_SC_TCAM_MBIST_EN_REG 0x2300
#define DSAF_SUB_SC_DSAF_CLK_ST_REG 0x5300
@@ -137,6 +144,9 @@
#define DSAF_PPE_INT_STS_0_REG 0x1E0
#define DSAF_ROCEE_INT_STS_0_REG 0x200
#define DSAFV2_SERDES_LBK_0_REG 0x220
+#define DSAF_PAUSE_CFG_REG 0x240
+#define DSAF_ROCE_PORT_MAP_REG 0x2A0
+#define DSAF_ROCE_SL_MAP_REG 0x2A4
#define DSAF_PPE_QID_CFG_0_REG 0x300
#define DSAF_SW_PORT_TYPE_0_REG 0x320
#define DSAF_STP_PORT_TYPE_0_REG 0x340
@@ -178,7 +188,8 @@
#define DSAF_SBM_BP_CFG_2_XGE_REG_0_REG 0x200C
#define DSAF_SBM_BP_CFG_2_PPE_REG_0_REG 0x230C
#define DSAF_SBM_BP_CFG_2_ROCEE_REG_0_REG 0x260C
-#define DSAFV2_SBM_BP_CFG_2_ROCEE_REG_0_REG 0x238C
+#define DSAF_SBM_ROCEE_CFG_REG_REG 0x2380
+#define DSAFV2_SBM_BP_CFG_2_ROCEE_REG_0_REG 0x238C
#define DSAF_SBM_FREE_CNT_0_0_REG 0x2010
#define DSAF_SBM_FREE_CNT_1_0_REG 0x2014
#define DSAF_SBM_BP_CNT_0_0_REG 0x2018
@@ -790,6 +801,9 @@
#define DSAFV2_SBM_CFG4_RESET_BUF_NUM_NO_PFC_S 9
#define DSAFV2_SBM_CFG4_RESET_BUF_NUM_NO_PFC_M (((1ULL << 9) - 1) << 9)
+#define DSAF_CHNS_MASK 0x3f000
+#define DSAF_SBM_ROCEE_CFG_CRD_EN_B 2
+
#define DSAF_TBL_TCAM_ADDR_S 0
#define DSAF_TBL_TCAM_ADDR_M ((1ULL << 9) - 1)
--
1.9.1
next prev parent reply other threads:[~2016-05-04 12:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-04 12:20 [PATCH v7 00/21] Add HiSilicon RoCE driver Lijun Ou
2016-05-04 12:20 ` Lijun Ou [this message]
2016-05-04 12:20 ` [PATCH v7 02/21] devicetree: bindings: IB: Add binding document for HiSilicon RoCE Lijun Ou
2016-05-04 12:21 ` [PATCH v7 03/21] IB/hns: Add initial main frame driver and get cfg info Lijun Ou
2016-05-04 12:21 ` [PATCH v7 04/21] IB/hns: Add RoCE engine reset function Lijun Ou
2016-05-04 12:21 ` [PATCH v7 05/21] IB/hns: Add initial profile resource Lijun Ou
2016-05-04 12:21 ` [PATCH v7 06/21] IB/hns: Add initial cmd operation Lijun Ou
2016-05-04 12:21 ` [PATCH v7 07/21] IB/hns: Add event queue support Lijun Ou
2016-05-04 12:21 ` [PATCH v7 08/21] IB/hns: Add icm support Lijun Ou
2016-05-04 12:21 ` [PATCH v7 09/21] IB/hns: Add hca support Lijun Ou
2016-05-04 12:21 ` [PATCH v7 10/21] IB/hns: Add process flow to init RoCE engine Lijun Ou
2016-05-04 12:21 ` [PATCH v7 11/21] IB/hns: Add IB device registration Lijun Ou
2016-05-04 12:21 ` [PATCH v7 12/21] IB/hns: Set mtu and gid support Lijun Ou
2016-05-04 12:21 ` [PATCH v7 13/21] IB/hns: Add interface of the protocol stack registration Lijun Ou
2016-05-04 12:21 ` [PATCH v7 14/21] IB/hns: Add operations support for IB device and port Lijun Ou
2016-05-04 12:21 ` [PATCH v7 15/21] IB/hns: Add PD operations support Lijun Ou
2016-05-04 12:21 ` [PATCH v7 16/21] IB/hns: Add ah " Lijun Ou
2016-05-04 12:21 ` [PATCH v7 17/21] IB/hns: Add QP " Lijun Ou
2016-05-04 12:21 ` [PATCH v7 18/21] IB/hns: Add CQ " Lijun Ou
2016-05-04 12:21 ` [PATCH v7 19/21] IB/hns: Add memory region " Lijun Ou
2016-05-04 12:21 ` [PATCH v7 20/21] IB/hns: Kconfig and Makefile for RoCE module Lijun Ou
2016-05-04 12:21 ` [PATCH v7 21/21] MAINTAINERS: Add maintainers for HiSilicon RoCE driver Lijun Ou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462364478-10808-2-git-send-email-oulijun@huawei.com \
--to=oulijun@huawei.com \
--cc=charles.chenxin@huawei.com \
--cc=davem@davemloft.net \
--cc=dledford@redhat.com \
--cc=gongyangming@huawei.com \
--cc=haifeng.wei@huawei.com \
--cc=hal.rosenstock@gmail.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jiri@mellanox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=sean.hefty@intel.com \
--cc=tangchaofei@huawei.com \
--cc=xiaokun@huawei.com \
--cc=yankejian@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).