linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com>
To: gregkh@linuxfoundation.org, jslaby@suse.com, ricardo.ribalda@gmail.com
Cc: arnd@arndb.de, peter@hurleysoftware.com,
	linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
	tom_tsai@fintek.com.tw, peter_hong@fintek.com.tw,
	"Ji-Ze Hong (Peter Hong)" <hpeter+linux_kernel@gmail.com>
Subject: [PATCH 7/7] serial: 8250_fintek: Add F81865 Support
Date: Thu,  1 Sep 2016 11:39:56 +0800	[thread overview]
Message-ID: <1472701196-14795-8-git-send-email-hpeter+linux_kernel@gmail.com> (raw)
In-Reply-To: <1472701196-14795-1-git-send-email-hpeter+linux_kernel@gmail.com>

Fintek F81865 is a LPC to 6 UARTs SuperIO. It has less functional UARTs
likes F81866. It's also need check the IRQ mode with system assigned,
but the configuration is not the same with F81216 series.

F81865 IRQ Mode setting:
    0xf0
            Bit1: IRQ_MODE0
            Bit0: Share mode (always on)

    Level/Low: IRQ_MODE0:0
    Edge/High: IRQ_MODE0:1

The following list is brief descriptions of F81865:

F81865 (0704)
    9Bit(not implements with mainline)
    RS485(implemented)

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
---
 drivers/tty/serial/8250/8250_fintek.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 1194e57..3fb9ab6 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -21,6 +21,7 @@
 #define EXIT_KEY 0xAA
 #define CHIP_ID1  0x20
 #define CHIP_ID2  0x21
+#define CHIP_ID_F81865 0x0407
 #define CHIP_ID_F81866 0x1010
 #define CHIP_ID_F81216AD 0x1602
 #define CHIP_ID_F81216H 0x0501
@@ -130,6 +131,7 @@ static int fintek_8250_check_id(struct fintek_8250 *pdata)
 	chip |= sio_read_reg(pdata, CHIP_ID2) << 8;
 
 	switch (chip) {
+	case CHIP_ID_F81865:
 	case CHIP_ID_F81866:
 	case CHIP_ID_F81216AD:
 	case CHIP_ID_F81216H:
@@ -147,6 +149,7 @@ static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min,
 				     int *max)
 {
 	switch (pdata->pid) {
+	case CHIP_ID_F81865:
 	case CHIP_ID_F81866:
 		*min = F81866_LDN_LOW;
 		*max = F81866_LDN_HIGH;
@@ -231,9 +234,12 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
 	sio_write_reg(pdata, LDN, pdata->index);
 
 	switch (pdata->pid) {
+	case CHIP_ID_F81865:
 	case CHIP_ID_F81866:
-		sio_write_mask_reg(pdata, F81866_FIFO_CTRL, F81866_IRQ_MODE1,
-				   0);
+		if (pdata->pid == CHIP_ID_F81866)
+			sio_write_mask_reg(pdata, F81866_FIFO_CTRL,
+					   F81866_IRQ_MODE1, 0);
+
 		sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_SHARE,
 				   F81866_IRQ_SHARE);
 		sio_write_mask_reg(pdata, F81866_IRQ_MODE,
@@ -312,6 +318,7 @@ static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
 	default: /* No RS485 Auto direction functional */
 		break;
 
+	case CHIP_ID_F81865:
 	case CHIP_ID_F81866:
 	case CHIP_ID_F81216AD:
 	case CHIP_ID_F81216H:
-- 
1.9.1

  parent reply	other threads:[~2016-09-01  3:41 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-01  3:39 [PATCH 0/7] serial: 8250_fintek: Fix the IRQ mode and code refactoring Ji-Ze Hong (Peter Hong)
2016-09-01  3:39 ` [PATCH 1/7] serial: 8250_fintek: Refactoring read/write method Ji-Ze Hong (Peter Hong)
2016-09-01  3:39 ` [PATCH 2/7] serial: 8250_fintek: Set IRQ Mode when port probed Ji-Ze Hong (Peter Hong)
2016-09-01  3:39 ` [PATCH 3/7] serial: 8250_fintek: Set maximum FIFO of F81216H Ji-Ze Hong (Peter Hong)
2016-09-01 11:16   ` Ricardo Ribalda Delgado
2016-09-06  1:37     ` Ji-Ze Hong (Peter Hong)
2016-09-01  3:39 ` [PATCH 4/7] serial: 8250_fintek: Rearrange function Ji-Ze Hong (Peter Hong)
2016-09-01 11:17   ` Ricardo Ribalda Delgado
2016-09-06  1:56     ` Ji-Ze Hong (Peter Hong)
2016-09-01  3:39 ` [PATCH 5/7] serial: 8250_fintek: Add F81216 Support Ji-Ze Hong (Peter Hong)
2016-09-01 11:22   ` Ricardo Ribalda Delgado
2016-09-06  2:04     ` Ji-Ze Hong (Peter Hong)
2016-09-01  3:39 ` [PATCH 6/7] serial: 8250_fintek: Add F81866 Support Ji-Ze Hong (Peter Hong)
2016-09-01  3:39 ` Ji-Ze Hong (Peter Hong) [this message]
2016-09-01 11:29   ` [PATCH 7/7] serial: 8250_fintek: Add F81865 Support Ricardo Ribalda Delgado

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1472701196-14795-8-git-send-email-hpeter+linux_kernel@gmail.com \
    --to=hpeter@gmail.com \
    --cc=arnd@arndb.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=hpeter+linux_kernel@gmail.com \
    --cc=jslaby@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=peter@hurleysoftware.com \
    --cc=peter_hong@fintek.com.tw \
    --cc=ricardo.ribalda@gmail.com \
    --cc=tom_tsai@fintek.com.tw \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).