From: Jarod Wilson <jarod@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Jarod Wilson <jarod@redhat.com>,
netdev@vger.kernel.org, Krzysztof Halasa <khc@pm.waw.pl>,
Krzysztof Halasa <khalasa@piap.pl>,
Jan Yenya Kasprzak <kas@fi.muni.cz>,
Francois Romieu <romieu@fr.zoreil.com>,
Kevin Curtis <kevin.curtis@farsite.co.uk>,
Zhao Qiang <qiang.zhao@nxp.com>
Subject: [PATCH net-next v2 4/9] net: use core MTU range checking in WAN drivers
Date: Thu, 20 Oct 2016 13:55:19 -0400 [thread overview]
Message-ID: <20161020175524.6184-5-jarod@redhat.com> (raw)
In-Reply-To: <20161020175524.6184-1-jarod@redhat.com>
- set min/max_mtu in all hdlc drivers, remove hdlc_change_mtu
- sent max_mtu in lec driver, remove lec_change_mtu
- set min/max_mtu in x25_asy driver
CC: netdev@vger.kernel.org
CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Krzysztof Halasa <khalasa@piap.pl>
CC: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
CC: Francois Romieu <romieu@fr.zoreil.com>
CC: Kevin Curtis <kevin.curtis@farsite.co.uk>
CC: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
drivers/char/pcmcia/synclink_cs.c | 1 -
drivers/net/wan/c101.c | 1 -
drivers/net/wan/cosa.c | 1 -
drivers/net/wan/dscc4.c | 1 -
drivers/net/wan/farsync.c | 1 -
drivers/net/wan/fsl_ucc_hdlc.c | 1 -
drivers/net/wan/hdlc.c | 11 ++---------
drivers/net/wan/hdlc_fr.c | 3 ++-
drivers/net/wan/hostess_sv11.c | 1 -
drivers/net/wan/ixp4xx_hss.c | 1 -
drivers/net/wan/lmc/lmc_main.c | 1 -
drivers/net/wan/n2.c | 1 -
drivers/net/wan/pc300too.c | 1 -
drivers/net/wan/pci200syn.c | 1 -
drivers/net/wan/sealevel.c | 1 -
drivers/net/wan/wanxl.c | 1 -
drivers/net/wan/x25_asy.c | 5 ++---
drivers/tty/synclink.c | 1 -
drivers/tty/synclink_gt.c | 1 -
drivers/tty/synclinkmp.c | 1 -
include/linux/hdlc.h | 2 --
net/atm/lec.c | 11 +----------
22 files changed, 7 insertions(+), 42 deletions(-)
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index d28922d..a7dd5f4 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -4248,7 +4248,6 @@ static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
static const struct net_device_ops hdlcdev_ops = {
.ndo_open = hdlcdev_open,
.ndo_stop = hdlcdev_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = hdlcdev_ioctl,
.ndo_tx_timeout = hdlcdev_tx_timeout,
diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
index 09a5075..2371e07 100644
--- a/drivers/net/wan/c101.c
+++ b/drivers/net/wan/c101.c
@@ -302,7 +302,6 @@ static void c101_destroy_card(card_t *card)
static const struct net_device_ops c101_ops = {
.ndo_open = c101_open,
.ndo_stop = c101_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = c101_ioctl,
};
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index b87fe0a..087eb26 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -432,7 +432,6 @@ module_exit(cosa_exit);
static const struct net_device_ops cosa_ops = {
.ndo_open = cosa_net_open,
.ndo_stop = cosa_net_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = cosa_net_ioctl,
.ndo_tx_timeout = cosa_net_timeout,
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 6292259..7351e54 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -887,7 +887,6 @@ static inline int dscc4_set_quartz(struct dscc4_dev_priv *dpriv, int hz)
static const struct net_device_ops dscc4_ops = {
.ndo_open = dscc4_open,
.ndo_stop = dscc4_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = dscc4_ioctl,
.ndo_tx_timeout = dscc4_tx_timeout,
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 3c9cbf9..03696d3 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -2394,7 +2394,6 @@ fst_init_card(struct fst_card_info *card)
static const struct net_device_ops fst_ops = {
.ndo_open = fst_open,
.ndo_stop = fst_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = fst_ioctl,
.ndo_tx_timeout = fst_tx_timeout,
diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 6564753..e38ce4d 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -992,7 +992,6 @@ static const struct dev_pm_ops uhdlc_pm_ops = {
static const struct net_device_ops uhdlc_ops = {
.ndo_open = uhdlc_open,
.ndo_stop = uhdlc_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = uhdlc_ioctl,
};
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 9bd4aa8..7221a53 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -46,14 +46,6 @@ static const char* version = "HDLC support module revision 1.22";
static struct hdlc_proto *first_proto;
-int hdlc_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < 68) || (new_mtu > HDLC_MAX_MTU))
- return -EINVAL;
- dev->mtu = new_mtu;
- return 0;
-}
-
static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *p, struct net_device *orig_dev)
{
@@ -237,6 +229,8 @@ static void hdlc_setup_dev(struct net_device *dev)
dev->flags = IFF_POINTOPOINT | IFF_NOARP;
dev->priv_flags = IFF_WAN_HDLC;
dev->mtu = HDLC_MAX_MTU;
+ dev->min_mtu = 68;
+ dev->max_mtu = HDLC_MAX_MTU;
dev->type = ARPHRD_RAWHDLC;
dev->hard_header_len = 16;
dev->addr_len = 0;
@@ -353,7 +347,6 @@ MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
MODULE_DESCRIPTION("HDLC support module");
MODULE_LICENSE("GPL v2");
-EXPORT_SYMBOL(hdlc_change_mtu);
EXPORT_SYMBOL(hdlc_start_xmit);
EXPORT_SYMBOL(hdlc_open);
EXPORT_SYMBOL(hdlc_close);
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index b6e0cfb..eb91528 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1053,7 +1053,6 @@ static void pvc_setup(struct net_device *dev)
static const struct net_device_ops pvc_ops = {
.ndo_open = pvc_open,
.ndo_stop = pvc_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = pvc_xmit,
.ndo_do_ioctl = pvc_ioctl,
};
@@ -1096,6 +1095,8 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
}
dev->netdev_ops = &pvc_ops;
dev->mtu = HDLC_MAX_MTU;
+ dev->min_mtu = 68;
+ dev->max_mtu = HDLC_MAX_MTU;
dev->priv_flags |= IFF_NO_QUEUE;
dev->ml_priv = pvc;
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 3d74166..dd6bb33 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -180,7 +180,6 @@ static int hostess_attach(struct net_device *dev, unsigned short encoding,
static const struct net_device_ops hostess_ops = {
.ndo_open = hostess_open,
.ndo_stop = hostess_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = hostess_ioctl,
};
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index e7bbdb7..6a505c2 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -1321,7 +1321,6 @@ static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
static const struct net_device_ops hss_hdlc_ops = {
.ndo_open = hss_hdlc_open,
.ndo_stop = hss_hdlc_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = hss_hdlc_ioctl,
};
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 299140c..001b779 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -808,7 +808,6 @@ static int lmc_attach(struct net_device *dev, unsigned short encoding,
static const struct net_device_ops lmc_ops = {
.ndo_open = lmc_open,
.ndo_stop = lmc_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = lmc_ioctl,
.ndo_tx_timeout = lmc_driver_timeout,
diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index 315bf09..c8f4517 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -330,7 +330,6 @@ static void n2_destroy_card(card_t *card)
static const struct net_device_ops n2_ops = {
.ndo_open = n2_open,
.ndo_stop = n2_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = n2_ioctl,
};
diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
index db36385..e1dd1ec 100644
--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -291,7 +291,6 @@ static void pc300_pci_remove_one(struct pci_dev *pdev)
static const struct net_device_ops pc300_ops = {
.ndo_open = pc300_open,
.ndo_stop = pc300_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = pc300_ioctl,
};
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index e845562..4e437c5 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -270,7 +270,6 @@ static void pci200_pci_remove_one(struct pci_dev *pdev)
static const struct net_device_ops pci200_ops = {
.ndo_open = pci200_open,
.ndo_stop = pci200_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = pci200_ioctl,
};
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index 27860b4..fbb5aa2 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -174,7 +174,6 @@ static int sealevel_attach(struct net_device *dev, unsigned short encoding,
static const struct net_device_ops sealevel_ops = {
.ndo_open = sealevel_open,
.ndo_stop = sealevel_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = sealevel_ioctl,
};
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index a20d688..0c73175 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -551,7 +551,6 @@ static void wanxl_pci_remove_one(struct pci_dev *pdev)
static const struct net_device_ops wanxl_ops = {
.ndo_open = wanxl_open,
.ndo_stop = wanxl_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = wanxl_ioctl,
.ndo_get_stats = wanxl_get_stats,
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 1bc5e93..878b05d 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -124,9 +124,6 @@ static int x25_asy_change_mtu(struct net_device *dev, int newmtu)
unsigned char *xbuff, *rbuff;
int len;
- if (newmtu > 65534)
- return -EINVAL;
-
len = 2 * newmtu;
xbuff = kmalloc(len + 4, GFP_ATOMIC);
rbuff = kmalloc(len + 4, GFP_ATOMIC);
@@ -751,6 +748,8 @@ static void x25_asy_setup(struct net_device *dev)
*/
dev->mtu = SL_MTU;
+ dev->min_mtu = 0;
+ dev->max_mtu = 65534;
dev->netdev_ops = &x25_asy_netdev_ops;
dev->watchdog_timeo = HZ*20;
dev->hard_header_len = 0;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index c13e27e..415885c 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -7973,7 +7973,6 @@ static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
static const struct net_device_ops hdlcdev_ops = {
.ndo_open = hdlcdev_open,
.ndo_stop = hdlcdev_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = hdlcdev_ioctl,
.ndo_tx_timeout = hdlcdev_tx_timeout,
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 7aca2d4..8267bcf 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1768,7 +1768,6 @@ static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
static const struct net_device_ops hdlcdev_ops = {
.ndo_open = hdlcdev_open,
.ndo_stop = hdlcdev_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = hdlcdev_ioctl,
.ndo_tx_timeout = hdlcdev_tx_timeout,
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index dec1565..d66620f 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1887,7 +1887,6 @@ static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
static const struct net_device_ops hdlcdev_ops = {
.ndo_open = hdlcdev_open,
.ndo_stop = hdlcdev_close,
- .ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = hdlcdev_ioctl,
.ndo_tx_timeout = hdlcdev_tx_timeout,
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index e31bcd4..97585d9 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -93,8 +93,6 @@ static __inline__ void debug_frame(const struct sk_buff *skb)
int hdlc_open(struct net_device *dev);
/* Must be called by hardware driver when HDLC device is being closed */
void hdlc_close(struct net_device *dev);
-/* May be used by hardware driver */
-int hdlc_change_mtu(struct net_device *dev, int new_mtu);
/* Must be pointed to by hw driver's dev->netdev_ops->ndo_start_xmit */
netdev_tx_t hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev);
diff --git a/net/atm/lec.c b/net/atm/lec.c
index 5d26938..779b3fa 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -544,15 +544,6 @@ send_to_lecd(struct lec_priv *priv, atmlec_msg_type type,
return 0;
}
-/* shamelessly stolen from drivers/net/net_init.c */
-static int lec_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < 68) || (new_mtu > 18190))
- return -EINVAL;
- dev->mtu = new_mtu;
- return 0;
-}
-
static void lec_set_multicast_list(struct net_device *dev)
{
/*
@@ -565,7 +556,6 @@ static const struct net_device_ops lec_netdev_ops = {
.ndo_open = lec_open,
.ndo_stop = lec_close,
.ndo_start_xmit = lec_start_xmit,
- .ndo_change_mtu = lec_change_mtu,
.ndo_tx_timeout = lec_tx_timeout,
.ndo_set_rx_mode = lec_set_multicast_list,
};
@@ -742,6 +732,7 @@ static int lecd_attach(struct atm_vcc *vcc, int arg)
if (!dev_lec[i])
return -ENOMEM;
dev_lec[i]->netdev_ops = &lec_netdev_ops;
+ dev_lec[i]->max_mtu = 18190;
snprintf(dev_lec[i]->name, IFNAMSIZ, "lec%d", i);
if (register_netdev(dev_lec[i])) {
free_netdev(dev_lec[i]);
--
2.10.0
next prev parent reply other threads:[~2016-10-20 17:55 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-19 2:33 [PATCH net-next 0/6] net: use core MTU range checking everywhere Jarod Wilson
2016-10-19 2:33 ` [PATCH net-next 1/6] net: use core MTU range checking in USB NIC drivers Jarod Wilson
2016-10-19 2:33 ` [PATCH net-next 2/6] net: use core MTU range checking in wireless drivers Jarod Wilson
2016-10-19 7:38 ` Johannes Berg
2016-10-19 14:27 ` Jarod Wilson
2016-10-19 14:28 ` Johannes Berg
2016-10-19 2:33 ` [PATCH net-next 3/6] net: use core MTU range checking in WAN drivers Jarod Wilson
2016-10-21 12:04 ` Krzysztof Hałasa
2016-10-19 2:33 ` [PATCH net-next 4/6] net: use core MTU range checking in core net infra Jarod Wilson
2016-10-19 12:17 ` Jiri Benc
2016-10-19 14:51 ` Jarod Wilson
2016-10-19 13:55 ` Sabrina Dubroca
2016-10-19 14:40 ` Jarod Wilson
2016-10-19 15:28 ` Sabrina Dubroca
2016-10-19 15:46 ` Jarod Wilson
2016-10-19 2:33 ` [PATCH net-next 5/6] net: use core MTU range checking in virt drivers Jarod Wilson
2016-10-19 13:06 ` Aaron Conole
2016-10-19 13:59 ` Michael S. Tsirkin
2016-10-19 14:03 ` Michael S. Tsirkin
2016-10-19 14:17 ` Jarod Wilson
2016-10-19 14:15 ` Jarod Wilson
2016-10-19 14:07 ` Haiyang Zhang
2016-10-19 14:23 ` Jarod Wilson
2016-10-19 22:21 ` Shrikrishna Khare
2016-10-19 2:33 ` [PATCH net-next 6/6] net: use core MTU range checking in misc drivers Jarod Wilson
2016-10-19 14:37 ` Robin Holt
2016-10-19 16:05 ` Sabrina Dubroca
2016-10-19 22:38 ` Stefan Richter
2016-10-20 3:16 ` Jarod Wilson
2016-10-22 9:36 ` Stefan Richter
2016-10-22 18:51 ` Stefan Richter
2016-10-19 19:10 ` [PATCH net-next 0/6] net: use core MTU range checking everywhere David Miller
2016-10-19 19:29 ` Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 0/9] " Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 1/9] ethernet: use net core MTU range checking in more drivers Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 2/9] net: use core MTU range checking in USB NIC drivers Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 3/9] net: use core MTU range checking in wireless drivers Jarod Wilson
2016-10-20 18:22 ` Johannes Berg
2016-10-20 18:38 ` David Miller
2016-10-20 17:55 ` Jarod Wilson [this message]
2016-10-20 17:55 ` [PATCH net-next v2 5/9] net: use core MTU range checking in core net infra Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 6/9] net: use core MTU range checking in virt drivers Jarod Wilson
2016-10-20 18:05 ` Haiyang Zhang
2016-10-20 20:12 ` Kershner, David A
2016-10-20 20:23 ` Michael S. Tsirkin
2016-10-21 2:37 ` Jarod Wilson
2016-10-21 3:36 ` Michael S. Tsirkin
2016-10-21 13:24 ` Aaron Conole
2016-10-21 10:09 ` Wei Liu
2016-10-20 17:55 ` [PATCH net-next v2 7/9] net: use core MTU range checking in misc drivers Jarod Wilson
2016-10-21 6:52 ` Rémi Denis-Courmont
2016-10-21 16:22 ` Sebastian Reichel
2016-10-22 7:17 ` [net-next,v2,7/9] " Sven Eckelmann
2016-10-22 19:16 ` [PATCH net-next v2 7/9] " Stefan Richter
2016-10-22 19:27 ` Stefan Richter
2016-10-23 1:18 ` Jarod Wilson
2016-10-23 14:29 ` [PATCH net-next 1/2] firewire: net: fix maximum possible MTU Stefan Richter
2016-10-23 14:30 ` [PATCH net-next 2/2] firewire: net: set initial MTU = 1500 unconditionally, fix IPv6 on some CardBus cards Stefan Richter
2016-10-24 1:50 ` Jarod Wilson
2016-10-24 12:26 ` [PATCH net-next 2/2 v2] " Stefan Richter
2016-10-25 3:05 ` Jarod Wilson
2016-10-26 21:29 ` [PATCH net-next 2/2] " David Miller
2016-10-29 20:16 ` [PATCH net-next] firewire: net: really fix maximum possible MTU Stefan Richter
2016-10-30 3:01 ` David Miller
2016-10-24 1:50 ` [PATCH net-next 1/2] firewire: net: " Jarod Wilson
2016-10-26 21:29 ` David Miller
2016-10-20 17:55 ` [PATCH net-next v2 8/9] s390/net: use net core MTU range checking Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 9/9] ipv4/6: use core net " Jarod Wilson
2016-10-20 18:53 ` [PATCH net-next v2 0/9] net: use core MTU range checking everywhere David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161020175524.6184-5-jarod@redhat.com \
--to=jarod@redhat.com \
--cc=kas@fi.muni.cz \
--cc=kevin.curtis@farsite.co.uk \
--cc=khalasa@piap.pl \
--cc=khc@pm.waw.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=qiang.zhao@nxp.com \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).