From: Clemens Gruber <clemens.gruber@pqgruber.com>
To: linux-hwmon@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>,
Jean Delvare <jdelvare@suse.com>,
linux-kernel@vger.kernel.org,
Clemens Gruber <clemens.gruber@pqgruber.com>
Subject: [PATCH v3 1/3] hwmon: (mcp3021) add devicetree support
Date: Wed, 9 Nov 2016 18:16:13 +0100 [thread overview]
Message-ID: <20161109171614.9730-1-clemens.gruber@pqgruber.com> (raw)
Support setting the reference voltage from the device tree.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
---
drivers/hwmon/mcp3021.c | 46 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 36 insertions(+), 10 deletions(-)
diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c
index 972444a..81f4b7f 100644
--- a/drivers/hwmon/mcp3021.c
+++ b/drivers/hwmon/mcp3021.c
@@ -4,6 +4,7 @@
* Copyright (C) 2008-2009, 2012 Freescale Semiconductor, Inc.
* Author: Mingkai Hu <Mingkai.hu@freescale.com>
* Reworked by Sven Schuchmann <schuchmann@schleissheimer.de>
+ * Copyright (C) 2016 Clemens Gruber <clemens.gruber@pqgruber.com>
*
* This driver export the value of analog input voltage to sysfs, the
* voltage unit is mV. Through the sysfs interface, lm-sensors tool
@@ -22,11 +23,13 @@
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
-/* Vdd info */
+/* Vdd / reference voltage in millivolt */
#define MCP3021_VDD_MAX 5500
#define MCP3021_VDD_MIN 2700
-#define MCP3021_VDD_REF 3300
+#define MCP3021_VDD_DEFAULT 3300
/* output format */
#define MCP3021_SAR_SHIFT 2
@@ -47,7 +50,7 @@ enum chips {
*/
struct mcp3021_data {
struct device *hwmon_dev;
- u32 vdd; /* device power supply */
+ u32 vdd; /* supply and reference voltage in millivolt */
u16 sar_shift;
u16 sar_mask;
u8 output_res;
@@ -106,6 +109,7 @@ static int mcp3021_probe(struct i2c_client *client,
{
int err;
struct mcp3021_data *data = NULL;
+ struct device_node *np = client->dev.of_node;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
@@ -117,6 +121,21 @@ static int mcp3021_probe(struct i2c_client *client,
i2c_set_clientdata(client, data);
+ if (np) {
+ if (of_property_read_u32(np, "reference-voltage-microvolt",
+ &data->vdd))
+ data->vdd = MCP3021_VDD_DEFAULT;
+ else
+ data->vdd /= 1000;
+ } else {
+ u32 *pdata = dev_get_platdata(&client->dev);
+
+ if (pdata)
+ data->vdd = *pdata;
+ else
+ data->vdd = MCP3021_VDD_DEFAULT;
+ }
+
switch (id->driver_data) {
case mcp3021:
data->sar_shift = MCP3021_SAR_SHIFT;
@@ -129,15 +148,12 @@ static int mcp3021_probe(struct i2c_client *client,
data->sar_mask = MCP3221_SAR_MASK;
data->output_res = MCP3221_OUTPUT_RES;
break;
+ default:
+ return -ENODEV;
}
- if (dev_get_platdata(&client->dev)) {
- data->vdd = *(u32 *)dev_get_platdata(&client->dev);
- if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
- return -EINVAL;
- } else {
- data->vdd = MCP3021_VDD_REF;
- }
+ if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
+ return -EINVAL;
err = sysfs_create_file(&client->dev.kobj, &dev_attr_in0_input.attr);
if (err)
@@ -173,9 +189,19 @@ static const struct i2c_device_id mcp3021_id[] = {
};
MODULE_DEVICE_TABLE(i2c, mcp3021_id);
+#ifdef CONFIG_OF
+static const struct of_device_id of_mcp3021_match[] = {
+ { .compatible = "microchip,mcp3021", .data = (void *)mcp3021 },
+ { .compatible = "microchip,mcp3221", .data = (void *)mcp3221 },
+ { }
+};
+MODULE_DEVICE_TABLE(of, of_mcp3021_match);
+#endif
+
static struct i2c_driver mcp3021_driver = {
.driver = {
.name = "mcp3021",
+ .of_match_table = of_match_ptr(of_mcp3021_match),
},
.probe = mcp3021_probe,
.remove = mcp3021_remove,
--
2.10.2
next reply other threads:[~2016-11-09 17:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-09 17:16 Clemens Gruber [this message]
2016-11-09 17:16 ` [PATCH v3 3/3] hwmon: (mcp3021) replace S_IRUGO with 0444 Clemens Gruber
2016-11-19 16:29 ` [v3,3/3] " Guenter Roeck
2016-11-09 19:32 ` [PATCH v3 1/3] hwmon: (mcp3021) add devicetree support Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161109171614.9730-1-clemens.gruber@pqgruber.com \
--to=clemens.gruber@pqgruber.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).