[04/22] m68k/68000: Modernize printing of kernel messages
diff mbox series

Message ID 1481123360-10978-5-git-send-email-geert@linux-m68k.org
State New, archived
Headers show
Series
  • m68k: Modernize printing of kernel messages
Related show

Commit Message

Geert Uytterhoeven Dec. 7, 2016, 3:09 p.m. UTC
Convert from printk() to pr_*().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/68000/m68328.c   | 6 +++---
 arch/m68k/68000/m68EZ328.c | 6 +++---
 arch/m68k/68000/m68VZ328.c | 6 +++---
 3 files changed, 9 insertions(+), 9 deletions(-)

Comments

Greg Ungerer Dec. 9, 2016, noon UTC | #1
Hi Geert,

On 08/12/16 01:09, Geert Uytterhoeven wrote:
> Convert from printk() to pr_*().
>
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Looks good to me, so:

Acked-by: Greg Ungerer <gerg@linux-m68k.org>

Regards
Greg



> ---
>  arch/m68k/68000/m68328.c   | 6 +++---
>  arch/m68k/68000/m68EZ328.c | 6 +++---
>  arch/m68k/68000/m68VZ328.c | 6 +++---
>  3 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/m68k/68000/m68328.c b/arch/m68k/68000/m68328.c
> index e53caf4c3bfbf9d1..419751b15ec8b5f1 100644
> --- a/arch/m68k/68000/m68328.c
> +++ b/arch/m68k/68000/m68328.c
> @@ -45,9 +45,9 @@ void m68328_reset (void)
>
>  void __init config_BSP(char *command, int len)
>  {
> -  printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
> -  printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
> -  printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
> +  pr_info("68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
> +  pr_info("68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
> +  pr_info("68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
>
>    mach_hwclk = m68328_hwclk;
>    mach_reset = m68328_reset;
> diff --git a/arch/m68k/68000/m68EZ328.c b/arch/m68k/68000/m68EZ328.c
> index e6ab321f93f832e9..6a309a3cfbfc1953 100644
> --- a/arch/m68k/68000/m68EZ328.c
> +++ b/arch/m68k/68000/m68EZ328.c
> @@ -57,12 +57,12 @@ void __init config_BSP(char *command, int len)
>  {
>    unsigned char *p;
>
> -  printk(KERN_INFO "\n68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n");
> +  pr_info("68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n");
>
>  #ifdef CONFIG_UCSIMM
> -  printk(KERN_INFO "uCsimm serial string [%s]\n",getserialnum());
> +  pr_info("uCsimm serial string [%s]\n", getserialnum());
>    p = cs8900a_hwaddr = gethwaddr(0);
> -  printk(KERN_INFO "uCsimm hwaddr %pM\n", p);
> +  pr_info("uCsimm hwaddr %pM\n", p);
>
>    p = getbenv("APPEND");
>    if (p) strcpy(p,command);
> diff --git a/arch/m68k/68000/m68VZ328.c b/arch/m68k/68000/m68VZ328.c
> index 1154bdb220a022cd..81b5491685a4a2ab 100644
> --- a/arch/m68k/68000/m68VZ328.c
> +++ b/arch/m68k/68000/m68VZ328.c
> @@ -150,9 +150,9 @@ static void __init init_hardware(char *command, int size)
>  {
>  	char *p;
>
> -	printk(KERN_INFO "uCdimm serial string [%s]\n", getserialnum());
> +	pr_info("uCdimm serial string [%s]\n", getserialnum());
>  	p = cs8900a_hwaddr = gethwaddr(0);
> -	printk(KERN_INFO "uCdimm hwaddr %pM\n", p);
> +	pr_info("uCdimm hwaddr %pM\n", p);
>  	p = getbenv("APPEND");
>  	if (p)
>  		strcpy(p, command);
> @@ -177,7 +177,7 @@ static void __init init_hardware(char *command, int size)
>
>  void __init config_BSP(char *command, int size)
>  {
> -	printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
> +	pr_info("68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
>
>  	init_hardware(command, size);
>
>

Patch
diff mbox series

diff --git a/arch/m68k/68000/m68328.c b/arch/m68k/68000/m68328.c
index e53caf4c3bfbf9d1..419751b15ec8b5f1 100644
--- a/arch/m68k/68000/m68328.c
+++ b/arch/m68k/68000/m68328.c
@@ -45,9 +45,9 @@  void m68328_reset (void)
 
 void __init config_BSP(char *command, int len)
 {
-  printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
-  printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
-  printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
+  pr_info("68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
+  pr_info("68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
+  pr_info("68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
 
   mach_hwclk = m68328_hwclk;
   mach_reset = m68328_reset;
diff --git a/arch/m68k/68000/m68EZ328.c b/arch/m68k/68000/m68EZ328.c
index e6ab321f93f832e9..6a309a3cfbfc1953 100644
--- a/arch/m68k/68000/m68EZ328.c
+++ b/arch/m68k/68000/m68EZ328.c
@@ -57,12 +57,12 @@  void __init config_BSP(char *command, int len)
 {
   unsigned char *p;
 
-  printk(KERN_INFO "\n68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n");
+  pr_info("68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n");
 
 #ifdef CONFIG_UCSIMM
-  printk(KERN_INFO "uCsimm serial string [%s]\n",getserialnum());
+  pr_info("uCsimm serial string [%s]\n", getserialnum());
   p = cs8900a_hwaddr = gethwaddr(0);
-  printk(KERN_INFO "uCsimm hwaddr %pM\n", p);
+  pr_info("uCsimm hwaddr %pM\n", p);
 
   p = getbenv("APPEND");
   if (p) strcpy(p,command);
diff --git a/arch/m68k/68000/m68VZ328.c b/arch/m68k/68000/m68VZ328.c
index 1154bdb220a022cd..81b5491685a4a2ab 100644
--- a/arch/m68k/68000/m68VZ328.c
+++ b/arch/m68k/68000/m68VZ328.c
@@ -150,9 +150,9 @@  static void __init init_hardware(char *command, int size)
 {
 	char *p;
 
-	printk(KERN_INFO "uCdimm serial string [%s]\n", getserialnum());
+	pr_info("uCdimm serial string [%s]\n", getserialnum());
 	p = cs8900a_hwaddr = gethwaddr(0);
-	printk(KERN_INFO "uCdimm hwaddr %pM\n", p);
+	pr_info("uCdimm hwaddr %pM\n", p);
 	p = getbenv("APPEND");
 	if (p)
 		strcpy(p, command);
@@ -177,7 +177,7 @@  static void __init init_hardware(char *command, int size)
 
 void __init config_BSP(char *command, int size)
 {
-	printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
+	pr_info("68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
 
 	init_hardware(command, size);