[4.9,068/130] ARM: dts: da850-evm: fix read access to SPI flash
diff mbox series

Message ID 20170124075537.731027736@linuxfoundation.org
State New, archived
Headers show
Series
  • 4.9.6-stable review
Related show

Commit Message

Greg Kroah-Hartman Jan. 24, 2017, 7:55 a.m. UTC
4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabien Parent <fparent@baylibre.com>

commit 43849785e1079f6606a31cb7fda92d1200849728 upstream.

Read access to the SPI flash are broken on da850-evm, i.e. the data
read is not what is actually programmed on the flash.
According to the datasheet for the M25P64 part present on the da850-evm,
if the SPI frequency is higher than 20MHz then the READ command is not
usable anymore and only the FAST_READ command can be used to read data.

This commit specifies in the DTS that we should use FAST_READ command
instead of the READ command.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Olof Johansson <olof@lixom.net>

---
 arch/arm/boot/dts/da850-evm.dts |    1 +
 1 file changed, 1 insertion(+)

Patch
diff mbox series

--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -99,6 +99,7 @@ 
 				#size-cells = <1>;
 				compatible = "m25p64";
 				spi-max-frequency = <30000000>;
+				m25p,fast-read;
 				reg = <0>;
 				partition@0 {
 					label = "U-Boot-SPL";