linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Milo Kim <milo.kim@ti.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh@kernel.org>, Tony Lindgren <tony@atomide.com>,
	<linux-kernel@vger.kernel.org>, Milo Kim <milo.kim@ti.com>
Subject: [PATCH 1/2] Documentation: dt-bindings: mfd: add TI LMU device binding information
Date: Tue, 28 Feb 2017 15:45:14 +0900	[thread overview]
Message-ID: <20170228064515.7320-2-milo.kim@ti.com> (raw)
In-Reply-To: <20170228064515.7320-1-milo.kim@ti.com>

This patch describes overall binding for TI LMU MFD devices.

Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Milo Kim <milo.kim@ti.com>
---
 Documentation/devicetree/bindings/mfd/ti-lmu.txt | 243 +++++++++++++++++++++++
 1 file changed, 243 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti-lmu.txt

diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
new file mode 100644
index 000000000000..c885cf89b8ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -0,0 +1,243 @@
+TI LMU (Lighting Management Unit) device tree bindings
+
+TI LMU driver supports lighting devices below.
+
+   Name                  Child nodes
+  ------      ---------------------------------
+  LM3532       Backlight
+  LM3631       Backlight and regulator
+  LM3632       Backlight and regulator
+  LM3633       Backlight, LED and fault monitor
+  LM3695       Backlight
+  LM3697       Backlight and fault monitor
+
+Required properties:
+  - compatible: Should be one of:
+                "ti,lm3532"
+                "ti,lm3631"
+                "ti,lm3632"
+                "ti,lm3633"
+                "ti,lm3695"
+                "ti,lm3697"
+  - reg: I2C slave address.
+         0x11 for LM3632
+         0x29 for LM3631
+         0x36 for LM3633, LM3697
+         0x38 for LM3532
+         0x63 for LM3695
+
+Optional property:
+  - enable-gpios: A GPIO specifier for hardware enable pin.
+
+Required node:
+  - backlight: All LMU devices have backlight child nodes.
+               For the properties, please refer to [1].
+
+Optional nodes:
+  - fault-monitor: Hardware fault monitoring driver for LM3633 and LM3697.
+    Required properties:
+      - compatible: Should be one of:
+                    "ti,lm3633-fault-monitor"
+                    "ti,lm3697-fault-monitor"
+  - leds: LED properties for LM3633. Please refer to [2].
+  - regulators: Regulator properties for LM3631 and LM3632.
+                Please refer to [3].
+
+[1] ../leds/backlight/ti-lmu-backlight.txt
+[2] ../leds/leds-lm3633.txt
+[3] ../regulator/lm363x-regulator.txt
+
+lm3532@38 {
+	compatible = "ti,lm3532";
+	reg = <0x38>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+	backlight {
+		compatible = "ti,lm3532-backlight";
+
+		lcd {
+			led-sources = <0 1 2>;
+			ramp-up-msec = <30>;
+			ramp-down-msec = <0>;
+		};
+	};
+};
+
+lm3631@29 {
+	compatible = "ti,lm3631";
+	reg = <0x29>;
+
+	regulators {
+		compatible = "ti,lm363x-regulator";
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <6350000>;
+			regulator-always-on;
+		};
+
+		vcont {
+			regulator-name = "lcd_vcont";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		voref {
+			regulator-name = "lcd_voref";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-boot-on;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-boot-on;
+		};
+	};
+
+	backlight {
+		compatible = "ti,lm3631-backlight";
+
+		lcd_bl {
+			led-sources = <0 1>;
+			ramp-up-msec = <300>;
+		};
+	};
+};
+
+lm3632@11 {
+	compatible = "ti,lm3632";
+	reg = <0x11>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; /* PC2 */
+
+	regulators {
+		compatible = "ti,lm363x-regulator";
+
+		ti,lcm-en1-gpio = <&pioC 0 GPIO_ACTIVE_HIGH>; /* PC0 */
+		ti,lcm-en2-gpio = <&pioC 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <6400000>;
+			regulator-always-on;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+	};
+
+	backlight {
+		compatible = "ti,lm3632-backlight";
+
+		pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
+		pwm-names = "lmu-backlight";
+
+		lcd {
+			led-sources = <0 1>;
+			pwm-period = <10000>;
+		};
+	};
+};
+
+lm3633@36 {
+	compatible = "ti,lm3633";
+	reg = <0x36>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+	backlight {
+		compatible = "ti,lm3633-backlight";
+
+		main {
+			label = "main_lcd";
+			led-sources = <1 2>;
+			ramp-up-msec = <500>;
+			ramp-down-msec = <500>;
+		};
+
+		front {
+			label = "front_lcd";
+			led-sources = <0>;
+			ramp-up-msec = <1000>;
+			ramp-down-msec = <0>;
+		};
+	};
+
+	leds {
+		compatible = "ti,lm3633-leds";
+
+		chan1 {
+			label = "status";
+			led-sources = <1>;
+			led-max-microamp = <6000>;
+		};
+
+		chan345 {
+			label = "rgb";
+			led-sources = <3 4 5>;
+			led-max-microamp = <10000>;
+		};
+	};
+
+	fault-monitor {
+		compatible = "ti,lm3633-fault-monitor";
+	};
+};
+
+lm3695@63 {
+	compatible = "ti,lm3695";
+	reg = <0x63>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+	backlight {
+		compatible = "ti,lm3695-backlight";
+
+		lcd {
+			label = "bl";
+			led-sources = <0 1>;
+		};
+	};
+};
+
+lm3697@36 {
+	compatible = "ti,lm3697";
+	reg = <0x36>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+	backlight {
+		compatible = "ti,lm3697-backlight";
+
+		lcd {
+			led-sources = <0 1 2>;
+			ramp-up-msec = <200>;
+			ramp-down-msec = <200>;
+		};
+	};
+
+	fault-monitor {
+		compatible = "ti,lm3697-fault-monitor";
+	};
+};
-- 
2.11.0

  reply	other threads:[~2017-02-28  6:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-28  6:45 [PATCH v3 0/2] Support TI LMU devices Milo Kim
2017-02-28  6:45 ` Milo Kim [this message]
2017-03-01  0:37   ` [PATCH 1/2] Documentation: dt-bindings: mfd: add TI LMU device binding information Tony Lindgren
2017-03-14 16:44   ` Lee Jones
2017-02-28  6:45 ` [PATCH 2/2] mfd: add TI LMU driver Milo Kim
2017-03-01  0:44   ` Tony Lindgren
2017-03-14 16:44   ` Lee Jones
2017-03-01  0:36 ` [PATCH v3 0/2] Support TI LMU devices Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170228064515.7320-2-milo.kim@ti.com \
    --to=milo.kim@ti.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).