linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: matthew.gerlach@linux.intel.com
To: atull@opensource.altera.com, moritz.fischer@ettus.com,
	linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.com
Cc: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Subject: [PATCH v4 4/4] fpga pr ip: Platform driver for Altera Partial Reconfiguration IP.
Date: Thu,  2 Mar 2017 07:57:12 -0800	[thread overview]
Message-ID: <1488470232-20412-5-git-send-email-matthew.gerlach@linux.intel.com> (raw)
In-Reply-To: <1488470232-20412-1-git-send-email-matthew.gerlach@linux.intel.com>

From: Matthew Gerlach <matthew.gerlach@linux.intel.com>

This adds a platform bus driver for a fpga-mgr driver
that uses the Altera Partial Reconfiguration IP component.

v3:
    s/altr,pr-ip/altr,a10-pr-ip/
    s/alt_pr_probe/alt_pr_register/
    s/alt_pr_remove/alt_pr_unregister/
    fix error found by kbuild robot with more precise Kconfig depends

v2: s/altr,pr-ip-core/altr,pr-ip/
====================

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
---
 drivers/fpga/Kconfig                  |  7 ++++
 drivers/fpga/Makefile                 |  1 +
 drivers/fpga/altera-pr-ip-core-plat.c | 65 +++++++++++++++++++++++++++++++++++
 3 files changed, 73 insertions(+)
 create mode 100644 drivers/fpga/altera-pr-ip-core-plat.c

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index a46c173..0c51427 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -68,6 +68,13 @@ config ALTERA_PR_IP_CORE
         help
           Core driver support for Altera Partial Reconfiguration IP component
 
+config ALTERA_PR_IP_CORE_PLAT
+	tristate "Platform support of Altera Partial Reconfiguration IP Core"
+	depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM
+	help
+	  Platform driver support for Altera Partial Reconfiguration IP
+	  component
+
 endif # FPGA
 
 endmenu
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 82693d2..5b8ae2b 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
 obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
 obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
 obj-$(CONFIG_ALTERA_PR_IP_CORE)         += altera-pr-ip-core.o
+obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)    += altera-pr-ip-core-plat.o
 
 # FPGA Bridge Drivers
 obj-$(CONFIG_FPGA_BRIDGE)		+= fpga-bridge.o
diff --git a/drivers/fpga/altera-pr-ip-core-plat.c b/drivers/fpga/altera-pr-ip-core-plat.c
new file mode 100644
index 0000000..cff189a
--- /dev/null
+++ b/drivers/fpga/altera-pr-ip-core-plat.c
@@ -0,0 +1,65 @@
+/*
+ * Driver for Altera Partial Reconfiguration IP Core
+ *
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * Based on socfpga-a10.c Copyright (C) 2015-2016 Altera Corporation
+ *  by Alan Tull <atull@opensource.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "altera-pr-ip-core.h"
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+static int alt_pr_platform_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *reg_base;
+	struct resource *res;
+
+	/* First mmio base is for register access */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	reg_base = devm_ioremap_resource(dev, res);
+
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	return alt_pr_register(dev, reg_base);
+}
+
+static int alt_pr_platform_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return alt_pr_unregister(dev);
+}
+
+static const struct of_device_id alt_pr_of_match[] = {
+	{ .compatible = "altr,a10-pr-ip", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, alt_pr_of_match);
+
+static struct platform_driver alt_pr_platform_driver = {
+	.probe = alt_pr_platform_probe,
+	.remove = alt_pr_platform_remove,
+	.driver = {
+		.name	= "alt_a10_pr_ip",
+		.of_match_table = alt_pr_of_match,
+	},
+};
+
+module_platform_driver(alt_pr_platform_driver);
-- 
2.7.4

      parent reply	other threads:[~2017-03-02 16:00 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-02 15:57 [PATCH v4 0/4] Altera Partial Reconfiguration IP matthew.gerlach
2017-03-02 15:57 ` [PATCH v4 1/4] fpga: add config complete timeout matthew.gerlach
2017-03-02 15:57 ` [PATCH v4 2/4] fpga pr ip: Core driver support for Altera Partial Reconfiguration IP matthew.gerlach
2017-03-02 15:57 ` [PATCH v4 3/4] fpga dt: bindings " matthew.gerlach
2017-03-03  7:03   ` Rob Herring
2017-03-02 15:57 ` matthew.gerlach [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488470232-20412-5-git-send-email-matthew.gerlach@linux.intel.com \
    --to=matthew.gerlach@linux.intel.com \
    --cc=atull@opensource.altera.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=moritz.fischer@ettus.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).