linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>,
	Tony Lindgren <tony@atomide.com>,
	Richard Purdie <rpurdie@rpsys.net>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Pavel Machek <pavel@ucw.cz>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] leds: cpcap: new driver
Date: Sun,  5 Mar 2017 18:22:33 +0100	[thread overview]
Message-ID: <20170305172234.24120-1-sre@kernel.org> (raw)

Motorola CPCAP is a PMIC found in multiple smartphones.
This driver adds support for the chip's LED controllers.
It has explicit support for all controllers used by the
Droid 4. Since no datasheets are available the other
available controllers are not supported until somebody
verified, that the register layout matches.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 .../devicetree/bindings/leds/cpcap-leds.txt        |  29 +++
 drivers/leds/Kconfig                               |   9 +
 drivers/leds/Makefile                              |   1 +
 drivers/leds/leds-cpcap.c                          | 248 +++++++++++++++++++++
 4 files changed, 287 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/cpcap-leds.txt
 create mode 100644 drivers/leds/leds-cpcap.c

diff --git a/Documentation/devicetree/bindings/leds/cpcap-leds.txt b/Documentation/devicetree/bindings/leds/cpcap-leds.txt
new file mode 100644
index 000000000000..d523f8c3c358
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/cpcap-leds.txt
@@ -0,0 +1,29 @@
+Motorola CPCAP PMIC LEDs
+------------------------
+
+This module is part of the CPCAP. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
+
+Requires node properties:
+- compatible: should be one of
+   * "motorola,cpcap-led-mdl"		(Main Display Lighting)
+   * "motorola,cpcap-led-kl"		(Keyboard Lighting)
+   * "motorola,cpcap-led-adl"		(Aux Display Lighting)
+   * "motorola,cpcap-led-red"		(Red Triode)
+   * "motorola,cpcap-led-green"		(Green Triode)
+   * "motorola,cpcap-led-blue"		(Blue Triode)
+   * "motorola,cpcap-led-cf"		(Camera Flash)
+   * "motorola,cpcap-led-bt"		(Bluetooth)
+   * "motorola,cpcap-led-cp"		(Camera Privacy LED)
+- label: The label for this LED
+- vdd-supply: A phandle to the regulator powering the LED
+
+Example:
+
+&cpcap {
+	cpcap_led_red: red-led {
+		compatible = "motorola,cpcap-led-red";
+		label = "cpcap:red";
+		vdd-supply = <&sw5>;
+	};
+};
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 275f467956ee..043f02a4fe73 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -76,6 +76,15 @@ config LEDS_BCM6358
 	  This option enables support for LEDs connected to the BCM6358
 	  LED HW controller accessed via MMIO registers.
 
+config LEDS_CPCAP
+	tristate "LED Support for Motorola CPCAP"
+	depends on LEDS_CLASS
+	depends on MFD_CPCAP
+	depends on OF
+	help
+	  This option enables support for LEDs offered by Motorola's
+	  CPCAP PMIC.
+
 config LEDS_LM3530
 	tristate "LCD Backlight driver for LM3530"
 	depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 6b8273736478..333e84ce5d3b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_LEDS_AAT1290)		+= leds-aat1290.o
 obj-$(CONFIG_LEDS_BCM6328)		+= leds-bcm6328.o
 obj-$(CONFIG_LEDS_BCM6358)		+= leds-bcm6358.o
 obj-$(CONFIG_LEDS_BD2802)		+= leds-bd2802.o
+obj-$(CONFIG_LEDS_CPCAP)		+= leds-cpcap.o
 obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_LM3530)		+= leds-lm3530.o
 obj-$(CONFIG_LEDS_LM3533)		+= leds-lm3533.o
diff --git a/drivers/leds/leds-cpcap.c b/drivers/leds/leds-cpcap.c
new file mode 100644
index 000000000000..e2fe13aae2f1
--- /dev/null
+++ b/drivers/leds/leds-cpcap.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright (c) 2017 Sebastian Reichel <sre@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DEBUG
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+#define CPCAP_LED_NO_CURRENT 0x0001
+#define CPCAP_LED_OFF 0x0000
+
+struct cpcap_led_info {
+	u16 reg;
+	u16 mask;
+	u16 limit;
+	u16 init_mask;
+	u16 init_val;
+};
+
+static const struct cpcap_led_info cpcap_led_red = {
+	.reg	= CPCAP_REG_REDC,
+	.mask	= 0x03FF,
+	.limit	= 31,
+};
+
+static const struct cpcap_led_info cpcap_led_green = {
+	.reg	= CPCAP_REG_GREENC,
+	.mask	= 0x03FF,
+	.limit	= 31,
+};
+
+static const struct cpcap_led_info cpcap_led_blue = {
+	.reg	= CPCAP_REG_BLUEC,
+	.mask	= 0x03FF,
+	.limit	= 31,
+};
+
+/* aux display light */
+static const struct cpcap_led_info cpcap_led_adl = {
+	.reg		= CPCAP_REG_ADLC,
+	.mask		= 0x000F,
+	.limit		= 1,
+	.init_mask	= 0x7FFF,
+	.init_val	= 0x5FF0,
+};
+
+/* camera privacy led */
+static const struct cpcap_led_info cpcap_led_cp = {
+	.reg		= CPCAP_REG_CLEDC,
+	.mask		= 0x0007,
+	.limit		= 1,
+	.init_mask	= 0x03FF,
+	.init_val	= 0x0008,
+};
+
+/* unsupported led */
+static const struct cpcap_led_info cpcap_led_unsup = {
+	.reg		= 0x0000,
+};
+
+struct cpcap_led {
+	struct led_classdev led;
+	const struct cpcap_led_info *info;
+	struct device *dev;
+	struct regmap *regmap;
+	struct regulator *vdd;
+	bool powered;
+
+	u32 current_limit;
+};
+
+static u16 cpcap_led_val(u8 current_limit, u8 duty_cycle)
+{
+	current_limit &= 0x1f; /* 5 bit */
+	duty_cycle &= 0x0f; /* 4 bit */
+
+	return current_limit << 4 | duty_cycle;
+}
+
+static int cpcap_led_set_power(struct cpcap_led *led, bool status)
+{
+	int err;
+
+	if (status == led->powered)
+		return 0;
+
+	if (status)
+		err = regulator_enable(led->vdd);
+	else
+		err = regulator_disable(led->vdd);
+
+	if (err) {
+		dev_err(led->dev, "regulator failure: %d", err);
+		return err;
+	}
+
+	led->powered = status;
+
+	return 0;
+}
+
+static int cpcap_led_set(struct led_classdev *ledc, enum led_brightness value)
+{
+	struct cpcap_led *led = container_of(ledc, struct cpcap_led, led);
+	int brightness;
+	int err;
+
+	if (value > LED_OFF) {
+		err = cpcap_led_set_power(led, true);
+		if (err)
+			return err;
+	}
+
+	if (value == LED_OFF) {
+		/* Avoid HW issue by turning off current before duty cycle */
+		err = regmap_update_bits(led->regmap,
+			led->info->reg, led->info->mask, CPCAP_LED_NO_CURRENT);
+		if (err) {
+			dev_err(led->dev, "regmap failed: %d", err);
+			return err;
+		}
+
+		brightness = CPCAP_LED_OFF;
+	} else {
+		brightness = cpcap_led_val(value, 0x01);
+	}
+
+	dev_dbg(led->dev, "regmap: reg=%04x mask=%04x val=%04x",
+		led->info->reg, led->info->mask, brightness);
+
+	err = regmap_update_bits(led->regmap, led->info->reg, led->info->mask,
+		brightness);
+	if (err) {
+		dev_err(led->dev, "regmap failed: %d", err);
+		return err;
+	}
+
+	if (value == LED_OFF) {
+		err = cpcap_led_set_power(led, false);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id cpcap_led_of_match[] = {
+	{ .compatible = "motorola,cpcap-led-red", .data = &cpcap_led_red },
+	{ .compatible = "motorola,cpcap-led-green", .data = &cpcap_led_green },
+	{ .compatible = "motorola,cpcap-led-blue",  .data = &cpcap_led_blue },
+	{ .compatible = "motorola,cpcap-led-adl", .data = &cpcap_led_adl },
+	{ .compatible = "motorola,cpcap-led-cp", .data = &cpcap_led_cp },
+
+	{ .compatible = "motorola,cpcap-led-cf", .data = &cpcap_led_unsup },
+	{ .compatible = "motorola,cpcap-led-mdl", .data = &cpcap_led_unsup },
+	{ .compatible = "motorola,cpcap-led-kl", .data = &cpcap_led_unsup },
+	{ .compatible = "motorola,cpcap-led-bt", .data = &cpcap_led_unsup },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cpcap_led_of_match);
+
+static int cpcap_led_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct cpcap_led *led;
+	int err;
+
+	match = of_match_device(of_match_ptr(cpcap_led_of_match), &pdev->dev);
+	if (!match || !match->data)
+		return -EINVAL;
+
+	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, led);
+	led->info = match->data;
+	led->dev = &pdev->dev;
+
+	if (led->info->reg == 0x0000) {
+		dev_err(led->dev, "Unsupported LED");
+		return -ENODEV;
+	}
+
+	led->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!led->regmap)
+		return -ENODEV;
+
+	led->vdd = devm_regulator_get(&pdev->dev, "vdd");
+	if (IS_ERR(led->vdd)) {
+		err = PTR_ERR(led->vdd);
+		dev_err(led->dev, "Couldn't get regulator: %d", err);
+		return err;
+	}
+
+	err = device_property_read_string(&pdev->dev, "label", &led->led.name);
+	if (err) {
+		dev_err(led->dev, "Couldn't read led label: %d", err);
+		return err;
+	}
+
+	led->led.max_brightness = led->info->limit;
+
+	led->led.brightness_set_blocking = cpcap_led_set;
+	err = devm_led_classdev_register(&pdev->dev, &led->led);
+	if (err) {
+		dev_err(led->dev, "Couldn't register led: %d", err);
+		return err;
+	}
+
+	if (led->info->init_mask) {
+		err = regmap_update_bits(led->regmap, led->info->reg,
+			led->info->init_mask, led->info->init_val);
+		if (err) {
+			dev_err(led->dev, "regmap failed: %d", err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver cpcap_led_driver = {
+	.probe = cpcap_led_probe,
+	.driver = {
+		.name = "cpcap-led",
+		.of_match_table = cpcap_led_of_match,
+	},
+};
+module_platform_driver(cpcap_led_driver);
+
+MODULE_DESCRIPTION("CPCAP LED driver");
+MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
+MODULE_LICENSE("GPL");
-- 
2.11.0

             reply	other threads:[~2017-03-05 17:23 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-05 17:22 Sebastian Reichel [this message]
2017-03-05 17:22 ` [PATCH 2/2] ARM: dts: motorola-cpcap-mapphone: add LEDs Sebastian Reichel
2017-03-06 16:11   ` Tony Lindgren
2017-03-06 21:41 ` [PATCH 1/2] leds: cpcap: new driver Jacek Anaszewski
2017-03-06 22:11 ` Pavel Machek
2017-03-06 23:38   ` Tony Lindgren
2017-03-07 11:55     ` Pavel Machek
2017-03-07 16:26       ` Tony Lindgren
2017-04-11 20:20         ` Pavel Machek
2017-03-07 17:19   ` Sebastian Reichel
2017-04-11 20:19     ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170305172234.24120-1-sre@kernel.org \
    --to=sre@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=rpurdie@rpsys.net \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).