From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, yamada.masahiro@socionext.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, masami.hiramatsu@linaro.org,
jaswinder.singh@linaro.org,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v4 2/2] arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20
Date: Mon, 4 Sep 2017 10:16:31 +0900 [thread overview]
Message-ID: <1504487791-20582-3-git-send-email-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <1504487791-20582-1-git-send-email-hayashi.kunihiko@socionext.com>
Add nodes of thermal monitor and thermal zone for UniPhier LD20 SoC.
The thermal monitor is included in sysctrl.
Furthermore, since the reference board doesn't have a calibrated value of
thermal monitor, this patch gives the default value for LD20 reference
board.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
.../arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 4 +++
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 40 ++++++++++++++++++++++
2 files changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 1ca0c86..5bb63a2 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -50,3 +50,7 @@
&i2c0 {
status = "okay";
};
+
+&pvtctl {
+ socionext,tmod-calibration = <0x0f22 0x68ee>;
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index a29c279..0f733ad 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -46,6 +46,7 @@
clocks = <&sys_clk 32>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -64,6 +65,7 @@
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
cpu3: cpu@101 {
@@ -173,6 +175,38 @@
<1 10 4>;
};
+ thermal-zones {
+ cpu_thermal {
+ polling-delay-passive = <250>; /* 250ms */
+ polling-delay = <1000>; /* 1000ms */
+ thermal-sensors = <&pvtctl>;
+
+ trips {
+ cpu_crit: cpu_crit {
+ temperature = <110000>; /* 110C */
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ cpu_alert: cpu_alert {
+ temperature = <100000>; /* 100C */
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0 (-1) (-1)>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu2 (-1) (-1)>;
+ };
+ };
+ };
+ };
+
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -410,6 +444,12 @@
watchdog {
compatible = "socionext,uniphier-wdt";
};
+
+ pvtctl: pvtctl {
+ compatible = "socionext,uniphier-ld20-thermal";
+ interrupts = <0 3 4>;
+ #thermal-sensor-cells = <0>;
+ };
};
nand: nand@68000000 {
--
2.7.4
next prev parent reply other threads:[~2017-09-04 1:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-04 1:16 [PATCH v4 0/2] add thermal nodes for UniPhier SoCs Kunihiko Hayashi
2017-09-04 1:16 ` [PATCH v4 1/2] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 Kunihiko Hayashi
2017-09-04 1:16 ` Kunihiko Hayashi [this message]
2017-09-04 2:09 ` [PATCH v4 0/2] add thermal nodes for UniPhier SoCs Masahiro Yamada
2017-09-04 3:55 ` hayashi.kunihiko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1504487791-20582-3-git-send-email-hayashi.kunihiko@socionext.com \
--to=hayashi.kunihiko@socionext.com \
--cc=devicetree@vger.kernel.org \
--cc=jaswinder.singh@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masami.hiramatsu@linaro.org \
--cc=robh+dt@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).