[RFC,1/5] Add KSZ8795 switch driver support in Kconfig
diff mbox series

Message ID 93AF473E2DA327428DE3D46B72B1E9FD41121A79@CHN-SV-EXMX02.mchp-main.com
State New, archived
Headers show
  • [RFC,1/5] Add KSZ8795 switch driver support in Kconfig
Related show

Commit Message

Tristram.Ha@microchip.com Sept. 7, 2017, 9:17 p.m. UTC
From: Tristram Ha <Tristram.Ha@microchip.com>

Add KSZ8795 switch support with SPI access.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>

diff mbox series

diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index a8b8f59..0b6225e 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -10,3 +10,21 @@  config MICROCHIP_KSZ_SPI_DRIVER
 	depends on MICROCHIP_KSZ && SPI
 	  Select to enable support for registering switches configured through SPI.
+menuconfig MICROCHIP_KSZ8795
+	tristate "Microchip KSZ8795 series switch support"
+	depends on NET_DSA
+	select NET_DSA_TAG_KSZ
+	help
+	  This driver adds support for Microchip KSZ8795 switch chips.
+	tristate "KSZ8795 series SPI connected switch driver"
+	depends on MICROCHIP_KSZ8795 && SPI
+	default y
+	help
+	  This driver accesses KSZ8795 chip through SPI.
+	  It is required to use the KSZ8795 switch driver as the only access
+	  is through SPI.