From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: netdev@vger.kernel.org, "David S. Miller" <davem@davemloft.net>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Masami Hiramatsu <masami.hiramatsu@linaro.org>,
Jassi Brar <jaswinder.singh@linaro.org>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH net-next 1/3] dt-bindings: net: add DT bindings for Socionext UniPhier AVE
Date: Fri, 8 Sep 2017 22:02:09 +0900 [thread overview]
Message-ID: <1504875731-3680-2-git-send-email-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <1504875731-3680-1-git-send-email-hayashi.kunihiko@socionext.com>
DT bindings for the AVE ethernet controller found on Socionext's
UniPhier platforms.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
---
.../bindings/net/socionext,uniphier-ave4.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
new file mode 100644
index 0000000..57ae96d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
@@ -0,0 +1,44 @@
+* Socionext AVE ethernet controller
+
+This describes the devicetree bindings for AVE ethernet controller
+implemented on Socionext UniPhier SoCs.
+
+Required properties:
+ - compatible: Should be "socionext,uniphier-ave4"
+ - reg: Address where registers are mapped and size of region.
+ - interrupts: IRQ common for mac and phy interrupts.
+ - phy-mode: See ethernet.txt in the same directory.
+ - #address-cells: Must be <1>.
+ - #size-cells: Must be <0>.
+ - Node, with 'reg' property, for each PHY on the MDIO bus.
+
+Optional properties:
+ - socionext,desc-bits: 32/64 descriptor size. Default 32.
+ - local-mac-address: See ethernet.txt in the same directory.
+ - pinctrl-names: List of assigned state names, see pinctrl
+ binding documentation.
+ - pinctrl-0: List of phandles to configure the GPIO pin used
+ as interrupt line, see also generic and your platform
+ specific pinctrl binding documentation.
+ - socionext,internal-phy-interrupt: Boolean to denote if the
+ PHY interrupt is internally handled by the MAC.
+
+
+Example:
+
+ eth: ethernet@65000000 {
+ compatible = "socionext,uniphier-ave4";
+ reg = <0x65000000 0x8500>;
+ interrupts = <0 66 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ether_rgmii>;
+ phy-mode = "rgmii";
+ socionext,desc-bits = <64>;
+ local-mac-address = [00 00 00 00 00 00];
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethphy: ethphy@1 {
+ reg = <1>;
+ };
+ };
--
2.7.4
next prev parent reply other threads:[~2017-09-08 13:02 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-08 13:02 [PATCH net-next 0/3] add UniPhier AVE ethernet support Kunihiko Hayashi
2017-09-08 13:02 ` Kunihiko Hayashi [this message]
2017-09-08 14:03 ` [PATCH net-next 1/3] dt-bindings: net: add DT bindings for Socionext UniPhier AVE Andrew Lunn
2017-09-11 7:11 ` Kunihiko Hayashi
2017-09-08 18:54 ` Florian Fainelli
2017-09-11 7:11 ` Kunihiko Hayashi
2017-09-08 13:02 ` [PATCH net-next 2/3] net: ethernet: socionext: add AVE ethernet driver Kunihiko Hayashi
2017-09-08 13:50 ` Andrew Lunn
2017-09-11 6:50 ` Kunihiko Hayashi
2017-09-11 12:00 ` Andrew Lunn
2017-09-12 9:24 ` Kunihiko Hayashi
2017-09-08 14:44 ` Masahiro Yamada
2017-09-11 6:51 ` Kunihiko Hayashi
2017-09-08 19:31 ` Florian Fainelli
2017-09-11 6:55 ` Kunihiko Hayashi
2017-09-21 12:27 ` Kunihiko Hayashi
2017-09-09 16:30 ` Florian Fainelli
2017-09-11 6:56 ` Kunihiko Hayashi
2017-09-08 13:02 ` [PATCH net-next 3/3] net: phy: realtek: add RTL8201F phy-id and functions Kunihiko Hayashi
2017-09-08 13:57 ` Andrew Lunn
2017-09-08 18:51 ` Florian Fainelli
2017-09-09 3:33 ` Jassi Brar
2017-09-09 15:55 ` Andrew Lunn
2017-09-11 7:48 ` Kunihiko Hayashi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1504875731-3680-2-git-send-email-hayashi.kunihiko@socionext.com \
--to=hayashi.kunihiko@socionext.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jaswinder.singh@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masami.hiramatsu@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).