From: <Tristram.Ha@microchip.com>
To: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Pavel Machek <pavel@ucw.cz>,
Ruediger Schmitt <ruediger.schmitt@philips.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>, <muvarov@gmail.com>,
<nathan.leigh.conrad@gmail.com>,
<vivien.didelot@savoirfairelinux.com>,
<UNGLinuxDriver@microchip.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v1 RFC 5/7] Break KSZ9477 DSA driver into two files
Date: Fri, 6 Oct 2017 13:33:03 -0700 [thread overview]
Message-ID: <1507321985-15097-6-git-send-email-Tristram.Ha@microchip.com> (raw)
In-Reply-To: <1507321985-15097-1-git-send-email-Tristram.Ha@microchip.com>
From: Tristram Ha <Tristram.Ha@microchip.com>
Break KSZ9477 DSA driver into two files in preparation to add more KSZ
switch drivers.
Add common functions in ksz_common.h so that other KSZ switch drivers
can access code in ksz_common.c.
Add ksz_spi.h for common functions used by KSZ switch SPI drivers.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
---
drivers/net/dsa/microchip/Makefile | 2 +-
drivers/net/dsa/microchip/ksz9477.c | 1328 +++++++++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz9477_spi.c | 143 ++--
drivers/net/dsa/microchip/ksz_common.c | 1133 +++-----------------------
drivers/net/dsa/microchip/ksz_common.h | 230 ++++++
drivers/net/dsa/microchip/ksz_priv.h | 229 +++---
drivers/net/dsa/microchip/ksz_spi.h | 82 ++
7 files changed, 1926 insertions(+), 1221 deletions(-)
create mode 100644 drivers/net/dsa/microchip/ksz9477.c
create mode 100644 drivers/net/dsa/microchip/ksz_common.h
create mode 100644 drivers/net/dsa/microchip/ksz_spi.h
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 5b6325b..13dd8f0 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,2 +1,2 @@
-obj-$(CONFIG_MICROCHIP_KSZ9477) += ksz_common.o
+obj-$(CONFIG_MICROCHIP_KSZ9477) += ksz9477.o ksz_common.o
obj-$(CONFIG_MICROCHIP_KSZ9477_SPI_DRIVER) += ksz9477_spi.o
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
new file mode 100644
index 0000000..214d380
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -0,0 +1,1328 @@
+/*
+ * Microchip KSZ9477 switch driver main logic
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_priv.h"
+#include "ksz_common.h"
+#include "ksz_9477_reg.h"
+
+static const struct {
+ int index;
+ char string[ETH_GSTRING_LEN];
+} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+ { 0x00, "rx_hi" },
+ { 0x01, "rx_undersize" },
+ { 0x02, "rx_fragments" },
+ { 0x03, "rx_oversize" },
+ { 0x04, "rx_jabbers" },
+ { 0x05, "rx_symbol_err" },
+ { 0x06, "rx_crc_err" },
+ { 0x07, "rx_align_err" },
+ { 0x08, "rx_mac_ctrl" },
+ { 0x09, "rx_pause" },
+ { 0x0A, "rx_bcast" },
+ { 0x0B, "rx_mcast" },
+ { 0x0C, "rx_ucast" },
+ { 0x0D, "rx_64_or_less" },
+ { 0x0E, "rx_65_127" },
+ { 0x0F, "rx_128_255" },
+ { 0x10, "rx_256_511" },
+ { 0x11, "rx_512_1023" },
+ { 0x12, "rx_1024_1522" },
+ { 0x13, "rx_1523_2000" },
+ { 0x14, "rx_2001" },
+ { 0x15, "tx_hi" },
+ { 0x16, "tx_late_col" },
+ { 0x17, "tx_pause" },
+ { 0x18, "tx_bcast" },
+ { 0x19, "tx_mcast" },
+ { 0x1A, "tx_ucast" },
+ { 0x1B, "tx_deferred" },
+ { 0x1C, "tx_total_col" },
+ { 0x1D, "tx_exc_col" },
+ { 0x1E, "tx_single_col" },
+ { 0x1F, "tx_mult_col" },
+ { 0x80, "rx_total" },
+ { 0x81, "tx_total" },
+ { 0x82, "rx_discards" },
+ { 0x83, "tx_discards" },
+};
+
+static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
+{
+ u32 data;
+
+ ksz_read32(dev, addr, &data);
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ ksz_write32(dev, addr, data);
+}
+
+static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset,
+ u32 bits, bool set)
+{
+ u32 addr;
+ u32 data;
+
+ addr = PORT_CTRL_ADDR(port, offset);
+ ksz_read32(dev, addr, &data);
+
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+
+ ksz_write32(dev, addr, data);
+}
+
+static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int timeout)
+{
+ u8 data;
+
+ do {
+ ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret;
+
+ mutex_lock(&dev->vlan_mutex);
+
+ ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+ ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+
+ /* wait to be cleared */
+ ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read vlan table\n");
+ goto exit;
+ }
+
+ ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
+ ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
+ ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
+
+ ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+exit:
+ mutex_unlock(&dev->vlan_mutex);
+
+ return ret;
+}
+
+static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret;
+
+ mutex_lock(&dev->vlan_mutex);
+
+ ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
+ ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
+ ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
+
+ ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+ ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+
+ /* wait to be cleared */
+ ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to write vlan table\n");
+ goto exit;
+ }
+
+ ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+ /* update vlan cache table */
+ dev->vlan_cache[vid].table[0] = vlan_table[0];
+ dev->vlan_cache[vid].table[1] = vlan_table[1];
+ dev->vlan_cache[vid].table[2] = vlan_table[2];
+
+exit:
+ mutex_unlock(&dev->vlan_mutex);
+
+ return ret;
+}
+
+static void read_table(struct dsa_switch *ds, u32 *table)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+ ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+ ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+ ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
+}
+
+static void write_table(struct dsa_switch *ds, u32 *table)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+ ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+ ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+ ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
+}
+
+static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int timeout)
+{
+ u32 data;
+
+ do {
+ ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int timeout)
+{
+ u32 data;
+
+ do {
+ ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
+ if (!(data & waiton))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (timeout <= 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ksz9477_reset_switch(struct ksz_device *dev)
+{
+ u8 data8;
+ u16 data16;
+ u32 data32;
+
+ /* reset switch */
+ ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+
+ /* turn off SPI DO Edge select */
+ ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+ data8 &= ~SPI_AUTO_EDGE_DETECTION;
+ ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+
+ /* default configuration */
+ ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+ data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
+ SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+ ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+ /* disable interrupts */
+ ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+ ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+ ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+
+ /* set broadcast storm protection 10% rate */
+ ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
+ data16 &= ~BROADCAST_STORM_RATE;
+ data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
+ ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
+
+ return 0;
+}
+
+static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds)
+{
+ return DSA_TAG_PROTO_KSZ;
+}
+
+static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
+{
+ struct ksz_device *dev = ds->priv;
+ u16 val = 0xffff;
+
+ /* No real PHY after this. Simulate the PHY.
+ * A fixed PHY can be setup in the device tree, but this function is
+ * still called for that port during initialization.
+ * For RGMII PHY there is no way to access it so the fixed PHY should
+ * be used. For SGMII PHY the supporting code will be added later.
+ */
+ if (addr >= dev->phy_port_cnt) {
+ struct ksz_port *p = &dev->ports[addr];
+
+ switch (reg) {
+ case MII_BMCR:
+ val = 0x1140;
+ break;
+ case MII_BMSR:
+ val = 0x796d;
+ break;
+ case MII_PHYSID1:
+ val = 0x0022;
+ break;
+ case MII_PHYSID2:
+ val = 0x1631;
+ break;
+ case MII_ADVERTISE:
+ val = 0x05e1;
+ break;
+ case MII_LPA:
+ val = 0xc5e1;
+ break;
+ case MII_CTRL1000:
+ val = 0x0700;
+ break;
+ case MII_STAT1000:
+ if (p->speed == SPEED_1000)
+ val = 0x3800;
+ else
+ val = 0;
+ break;
+ }
+ } else {
+ ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+ }
+
+ return val;
+}
+
+static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
+ u16 val)
+{
+ struct ksz_device *dev = ds->priv;
+
+ /* No real PHY after this. */
+ if (addr >= dev->phy_port_cnt)
+ return 0;
+ ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+
+ return 0;
+}
+
+static void ksz9477_get_strings(struct dsa_switch *ds, int port, uint8_t *buf)
+{
+ int i;
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
+ ETH_GSTRING_LEN);
+ }
+}
+
+static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *buf)
+{
+ struct ksz_device *dev = ds->priv;
+ int i;
+ u32 data;
+ int timeout;
+
+ mutex_lock(&dev->stats_mutex);
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ data = MIB_COUNTER_READ;
+ data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S);
+ ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+ timeout = 1000;
+ do {
+ ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+ &data);
+ usleep_range(1, 10);
+ if (!(data & MIB_COUNTER_READ))
+ break;
+ } while (timeout-- > 0);
+
+ /* failed to read MIB. get out of loop */
+ if (!timeout) {
+ dev_dbg(dev->dev, "Failed to get MIB\n");
+ break;
+ }
+
+ /* count resets upon read */
+ ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+
+ dev->mib_value[i] += (uint64_t)data;
+ buf[i] = dev->mib_value[i];
+ }
+
+ mutex_unlock(&dev->stats_mutex);
+}
+
+static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
+ u8 member)
+{
+ ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
+ dev->ports[port].member = member;
+}
+
+static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
+ u8 state)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_port *p = &dev->ports[port];
+ u8 data;
+ int member = -1;
+
+ ksz_pread8(dev, port, P_STP_CTRL, &data);
+ data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ data |= PORT_LEARN_DISABLE;
+ if (port != dev->cpu_port)
+ member = 0;
+ break;
+ case BR_STATE_LISTENING:
+ data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+ if (port != dev->cpu_port &&
+ p->stp_state == BR_STATE_DISABLED)
+ member = dev->host_mask | p->vid_member;
+ break;
+ case BR_STATE_LEARNING:
+ data |= PORT_RX_ENABLE;
+ break;
+ case BR_STATE_FORWARDING:
+ data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+
+ /* This function is also used internally. */
+ if (port == dev->cpu_port)
+ break;
+
+ /* Port is a member of a bridge. */
+ if (dev->br_member & (1 << port)) {
+ dev->member |= (1 << port);
+ member = dev->member;
+ } else {
+ member = dev->host_mask | p->vid_member;
+ }
+ break;
+ case BR_STATE_BLOCKING:
+ data |= PORT_LEARN_DISABLE;
+ if (port != dev->cpu_port &&
+ p->stp_state == BR_STATE_DISABLED)
+ member = dev->host_mask | p->vid_member;
+ break;
+ default:
+ dev_err(ds->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ ksz_pwrite8(dev, port, P_STP_CTRL, data);
+ if (data & PORT_RX_ENABLE)
+ dev->rx_ports |= (1 << port);
+ else
+ dev->rx_ports &= ~(1 << port);
+ if (data & PORT_TX_ENABLE)
+ dev->tx_ports |= (1 << port);
+ else
+ dev->tx_ports &= ~(1 << port);
+
+ /* Port membership may share register with STP state. */
+ if (member >= 0 && member != p->member)
+ ksz9477_cfg_port_member(dev, port, (u8)member);
+
+ /* Check if forwarding needs to be updated. */
+ if (state != BR_STATE_FORWARDING) {
+ if (dev->br_member & (1 << port))
+ dev->member &= ~(1 << port);
+ }
+
+ /* When topology has changed the function ksz_update_port_member
+ * should be called to modify port forwarding behavior. However
+ * as the offload_fwd_mark indication cannot be reported here
+ * the switch forwarding function is not enabled.
+ */
+}
+
+static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+ u8 data;
+
+ ksz_read8(dev, REG_SW_LUE_CTRL_2, &data);
+ data &= ~(SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S);
+ data |= (SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
+ ksz_write8(dev, REG_SW_LUE_CTRL_2, data);
+ if (port < dev->mib_port_cnt) {
+ /* flush individual port */
+ ksz_pread8(dev, port, P_STP_CTRL, &data);
+ if (!(data & PORT_LEARN_DISABLE))
+ ksz_pwrite8(dev, port, P_STP_CTRL,
+ data | PORT_LEARN_DISABLE);
+ ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+ ksz_pwrite8(dev, port, P_STP_CTRL, data);
+ } else {
+ /* flush all */
+ ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
+ }
+}
+
+static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool flag)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (flag) {
+ ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+ PORT_VLAN_LOOKUP_VID_0, true);
+ ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true);
+ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
+ } else {
+ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
+ ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false);
+ ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+ PORT_VLAN_LOOKUP_VID_0, false);
+ }
+
+ return 0;
+}
+
+static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 vlan_table[3];
+ u16 vid;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ if (get_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to get vlan table\n");
+ return;
+ }
+
+ vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
+ if (untagged)
+ vlan_table[1] |= BIT(port);
+ else
+ vlan_table[1] &= ~BIT(port);
+ vlan_table[1] &= ~(BIT(dev->cpu_port));
+
+ vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
+
+ if (set_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to set vlan table\n");
+ return;
+ }
+
+ /* change PVID */
+ if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+ ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
+ }
+}
+
+static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct ksz_device *dev = ds->priv;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ u32 vlan_table[3];
+ u16 vid;
+ u16 pvid;
+
+ ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+ pvid = pvid & 0xFFF;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ if (get_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to get vlan table\n");
+ return -ETIMEDOUT;
+ }
+
+ vlan_table[2] &= ~BIT(port);
+
+ if (pvid == vid)
+ pvid = 1;
+
+ if (untagged)
+ vlan_table[1] &= ~BIT(port);
+
+ if (set_vlan_table(ds, vid, vlan_table)) {
+ dev_dbg(dev->dev, "Failed to set vlan table\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
+
+ return 0;
+}
+
+static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 alu_table[4];
+ u32 data;
+ int ret = 0;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* find any entry with mac & vid */
+ data = vid << ALU_FID_INDEX_S;
+ data |= ((addr[0] << 8) | addr[1]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+ data = ((addr[2] << 24) | (addr[3] << 16));
+ data |= ((addr[4] << 8) | addr[5]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+ /* start read operation */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU\n");
+ goto exit;
+ }
+
+ /* read ALU entry */
+ read_table(ds, alu_table);
+
+ /* update ALU entry */
+ alu_table[0] = ALU_V_STATIC_VALID;
+ alu_table[1] |= BIT(port);
+ if (vid)
+ alu_table[1] |= ALU_V_USE_FID;
+ alu_table[2] = (vid << ALU_V_FID_S);
+ alu_table[2] |= ((addr[0] << 8) | addr[1]);
+ alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
+ alu_table[3] |= ((addr[4] << 8) | addr[5]);
+
+ write_table(ds, alu_table);
+
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0)
+ dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 alu_table[4];
+ u32 data;
+ int ret = 0;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* read any entry with mac & vid */
+ data = vid << ALU_FID_INDEX_S;
+ data |= ((addr[0] << 8) | addr[1]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+ data = ((addr[2] << 24) | (addr[3] << 16));
+ data |= ((addr[4] << 8) | addr[5]);
+ ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+ /* start read operation */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU\n");
+ goto exit;
+ }
+
+ ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+ if (alu_table[0] & ALU_V_STATIC_VALID) {
+ ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+ ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+ ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+ /* clear forwarding port */
+ alu_table[2] &= ~BIT(port);
+
+ /* if there is no port to forward, clear table */
+ if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
+ alu_table[0] = 0;
+ alu_table[1] = 0;
+ alu_table[2] = 0;
+ alu_table[3] = 0;
+ }
+ } else {
+ alu_table[0] = 0;
+ alu_table[1] = 0;
+ alu_table[2] = 0;
+ alu_table[3] = 0;
+ }
+
+ write_table(ds, alu_table);
+
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+ /* wait to be finished */
+ ret = wait_alu_ready(dev, ALU_START, 1000);
+ if (ret < 0)
+ dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static void convert_alu(struct alu_struct *alu, u32 *alu_table)
+{
+ alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+ alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+ alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+ alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+ ALU_V_PRIO_AGE_CNT_M;
+ alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+ alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+ alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+ alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+ alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+ alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+ alu->mac[1] = alu_table[2] & 0xFF;
+ alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+ alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+ alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+ alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret = 0;
+ u32 ksz_data;
+ u32 alu_table[4];
+ struct alu_struct alu;
+ int timeout;
+
+ mutex_lock(&dev->alu_mutex);
+
+ /* start ALU search */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
+
+ do {
+ timeout = 1000;
+ do {
+ ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
+ if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
+ break;
+ usleep_range(1, 10);
+ } while (timeout-- > 0);
+
+ if (!timeout) {
+ dev_dbg(dev->dev, "Failed to search ALU\n");
+ ret = -ETIMEDOUT;
+ goto exit;
+ }
+
+ /* read ALU table */
+ read_table(ds, alu_table);
+
+ convert_alu(&alu, alu_table);
+
+ if (alu.port_forward & BIT(port)) {
+ ret = cb(alu.mac, alu.fid, alu.is_static, data);
+ if (ret)
+ goto exit;
+ }
+ } while (ksz_data & ALU_START);
+
+exit:
+
+ /* stop ALU search */
+ ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
+
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 static_table[4];
+ u32 data;
+ int index;
+ u32 mac_hi, mac_lo;
+
+ mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+ mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+ mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+ mutex_lock(&dev->alu_mutex);
+
+ for (index = 0; index < dev->num_statics; index++) {
+ /* find empty slot first */
+ data = (index << ALU_STAT_INDEX_S) |
+ ALU_STAT_READ | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+ goto exit;
+ }
+
+ /* read ALU static table */
+ read_table(ds, static_table);
+
+ if (static_table[0] & ALU_V_STATIC_VALID) {
+ /* check this has same vid & mac address */
+ if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+ ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+ static_table[3] == mac_lo) {
+ /* found matching one */
+ break;
+ }
+ } else {
+ /* found empty one */
+ break;
+ }
+ }
+
+ /* no available entry */
+ if (index == dev->num_statics)
+ goto exit;
+
+ /* add entry */
+ static_table[0] = ALU_V_STATIC_VALID;
+ static_table[1] |= BIT(port);
+ if (mdb->vid)
+ static_table[1] |= ALU_V_USE_FID;
+ static_table[2] = (mdb->vid << ALU_V_FID_S);
+ static_table[2] |= mac_hi;
+ static_table[3] = mac_lo;
+
+ write_table(ds, static_table);
+
+ data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb)
+{
+ struct ksz_device *dev = ds->priv;
+ u32 static_table[4];
+ u32 data;
+ int index;
+ int ret = 0;
+ u32 mac_hi, mac_lo;
+
+ mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+ mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+ mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+ mutex_lock(&dev->alu_mutex);
+
+ for (index = 0; index < dev->num_statics; index++) {
+ /* find empty slot first */
+ data = (index << ALU_STAT_INDEX_S) |
+ ALU_STAT_READ | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+ goto exit;
+ }
+
+ /* read ALU static table */
+ read_table(ds, static_table);
+
+ if (static_table[0] & ALU_V_STATIC_VALID) {
+ /* check this has same vid & mac address */
+
+ if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+ ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+ static_table[3] == mac_lo) {
+ /* found matching one */
+ break;
+ }
+ }
+ }
+
+ /* no available entry */
+ if (index == dev->num_statics) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* clear port */
+ static_table[1] &= ~BIT(port);
+
+ if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+ /* delete entry */
+ static_table[0] = 0;
+ static_table[1] = 0;
+ static_table[2] = 0;
+ static_table[3] = 0;
+ }
+
+ write_table(ds, static_table);
+
+ data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+ ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+ /* wait to be finished */
+ ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+ if (ret < 0)
+ dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+ mutex_unlock(&dev->alu_mutex);
+
+ return ret;
+}
+
+static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (ingress)
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+ else
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+ /* configure mirror port */
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, true);
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+ return 0;
+}
+
+static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct ksz_device *dev = ds->priv;
+ u8 data;
+
+ if (mirror->ingress)
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+ else
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+ if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, false);
+}
+
+static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+ u8 data8;
+ u8 member;
+ u16 data16;
+ struct ksz_port *p = &dev->ports[port];
+
+ /* enable tag tail for host port */
+ if (cpu_port)
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
+ true);
+
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
+
+ /* set back pressure */
+ ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
+
+ /* enable broadcast storm limit */
+ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+ /* disable DiffServ priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
+
+ /* replace priority */
+ ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
+ false);
+ ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
+ MTI_PVID_REPLACE, false);
+
+ /* enable 802.1p priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+ if (port < dev->phy_port_cnt) {
+ /* do not force flow control */
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+ PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+ false);
+
+ } else {
+ /* force flow control */
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+ PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+ true);
+
+ /* configure MAC to 1G & RGMII mode */
+ ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
+ data8 &= ~PORT_MII_NOT_1GBIT;
+ data8 &= ~PORT_MII_SEL_M;
+ switch (dev->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ data8 |= PORT_MII_NOT_1GBIT;
+ data8 |= PORT_MII_SEL;
+ p->speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ data8 |= PORT_MII_NOT_1GBIT;
+ data8 |= PORT_RMII_SEL;
+ p->speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ data8 |= PORT_GMII_SEL;
+ p->speed = SPEED_1000;
+ break;
+ default:
+ data8 &= ~PORT_RGMII_ID_IG_ENABLE;
+ data8 &= ~PORT_RGMII_ID_EG_ENABLE;
+ if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ data8 |= PORT_RGMII_ID_IG_ENABLE;
+ if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ data8 |= PORT_RGMII_ID_EG_ENABLE;
+ data8 |= PORT_RGMII_SEL;
+ p->speed = SPEED_1000;
+ break;
+ }
+ ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
+ p->duplex = 1;
+ }
+ if (cpu_port) {
+ member = dev->port_mask;
+ dev->on_ports = dev->host_mask;
+ dev->live_ports = dev->host_mask;
+ } else {
+ member = dev->host_mask | p->vid_member;
+ dev->on_ports |= (1 << port);
+
+ /* Link was detected before port is enabled. */
+ if (p->link_up)
+ dev->live_ports |= (1 << port);
+ }
+ ksz9477_cfg_port_member(dev, port, member);
+
+ /* clear pending interrupts */
+ ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
+}
+
+static void ksz9477_config_cpu_port(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_port *p;
+ int i;
+
+ ds->num_ports = dev->port_cnt;
+
+ for (i = 0; i < ds->num_ports; i++) {
+ if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
+ dev->cpu_port = i;
+ dev->host_mask = (1 << dev->cpu_port);
+ dev->port_mask |= dev->host_mask;
+
+ /* enable cpu port */
+ ksz9477_port_setup(dev, i, true);
+ p = &dev->ports[dev->cpu_port];
+ p->vid_member = dev->port_mask;
+ p->on = 1;
+ }
+ }
+
+ dev->member = dev->host_mask;
+
+ for (i = 0; i < dev->mib_port_cnt; i++) {
+ if (i == dev->cpu_port)
+ continue;
+ p = &dev->ports[i];
+
+ /* Initialize to non-zero so that ksz_cfg_port_member() will
+ * be called.
+ */
+ p->vid_member = (1 << i);
+ p->member = dev->port_mask;
+ ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+ p->on = 1;
+ if (i < dev->phy_port_cnt)
+ p->phy = 1;
+ if (dev->chip_id == 0x00947700 && i == 6) {
+ p->sgmii = 1;
+
+ /* SGMII PHY detection code is not implemented yet. */
+ p->phy = 0;
+ }
+ }
+}
+
+static int ksz9477_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_set(dev, REG_SW_MAC_ADDR_0, addr, ETH_ALEN);
+
+ return 0;
+}
+
+static int ksz9477_setup(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret = 0;
+
+ dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+ dev->num_vlans, GFP_KERNEL);
+ if (!dev->vlan_cache)
+ return -ENOMEM;
+
+ ret = ksz9477_reset_switch(dev);
+ if (ret) {
+ dev_err(ds->dev, "failed to reset switch\n");
+ return ret;
+ }
+
+ /* accept packet up to 2000bytes */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
+
+ ksz9477_config_cpu_port(ds);
+
+ ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
+
+ /* queue based egress rate limit */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+
+ /* start switch */
+ ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
+
+ return 0;
+}
+
+static const struct dsa_switch_ops ksz9477_switch_ops = {
+ .get_tag_protocol = ksz9477_get_tag_protocol,
+ .setup = ksz9477_setup,
+ .set_addr = ksz9477_set_addr,
+ .phy_read = ksz9477_phy_read16,
+ .phy_write = ksz9477_phy_write16,
+ .port_enable = ksz_enable_port,
+ .port_disable = ksz_disable_port,
+ .get_strings = ksz9477_get_strings,
+ .get_ethtool_stats = ksz_get_ethtool_stats,
+ .get_sset_count = ksz_sset_count,
+ .port_bridge_join = ksz_port_bridge_join,
+ .port_bridge_leave = ksz_port_bridge_leave,
+ .port_stp_state_set = ksz9477_port_stp_state_set,
+ .port_fast_age = ksz_port_fast_age,
+ .port_vlan_filtering = ksz9477_port_vlan_filtering,
+ .port_vlan_prepare = ksz_port_vlan_prepare,
+ .port_vlan_add = ksz9477_port_vlan_add,
+ .port_vlan_del = ksz9477_port_vlan_del,
+ .port_fdb_dump = ksz9477_port_fdb_dump,
+ .port_fdb_add = ksz9477_port_fdb_add,
+ .port_fdb_del = ksz9477_port_fdb_del,
+ .port_mdb_prepare = ksz_port_mdb_prepare,
+ .port_mdb_add = ksz9477_port_mdb_add,
+ .port_mdb_del = ksz9477_port_mdb_del,
+ .port_mirror_add = ksz9477_port_mirror_add,
+ .port_mirror_del = ksz9477_port_mirror_del,
+};
+
+static u32 ksz9477_get_port_addr(int port, int offset)
+{
+ return PORT_CTRL_ADDR(port, offset);
+}
+
+static int ksz9477_switch_detect(struct ksz_device *dev)
+{
+ u8 data8;
+ u32 id32;
+ int ret;
+
+ /* turn off SPI DO Edge select */
+ ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+ if (ret)
+ return ret;
+
+ data8 &= ~SPI_AUTO_EDGE_DETECTION;
+ ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+ if (ret)
+ return ret;
+
+ /* read chip id */
+ ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
+ if (ret)
+ return ret;
+
+ /* Number of ports can be reduced depending on chip. */
+ dev->mib_port_cnt = TOTAL_PORT_NUM;
+ dev->phy_port_cnt = 5;
+
+ dev->chip_id = id32;
+
+ return 0;
+}
+
+struct ksz_chip_data {
+ u32 chip_id;
+ const char *dev_name;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_ports;
+ int port_cnt;
+};
+
+static const struct ksz_chip_data ksz9477_switch_chips[] = {
+ {
+ .chip_id = 0x00947700,
+ .dev_name = "KSZ9477",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x7F, /* can be configured as cpu port */
+ .port_cnt = 7, /* total physical port count */
+ },
+};
+
+static int ksz9477_switch_init(struct ksz_device *dev)
+{
+ int i;
+
+ mutex_init(&dev->reg_mutex);
+ mutex_init(&dev->stats_mutex);
+ mutex_init(&dev->alu_mutex);
+ mutex_init(&dev->vlan_mutex);
+
+ dev->ds->ops = &ksz9477_switch_ops;
+
+ for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
+ const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
+
+ if (dev->chip_id == chip->chip_id) {
+ dev->name = chip->dev_name;
+ dev->num_vlans = chip->num_vlans;
+ dev->num_alus = chip->num_alus;
+ dev->num_statics = chip->num_statics;
+ dev->port_cnt = chip->port_cnt;
+ dev->cpu_ports = chip->cpu_ports;
+
+ break;
+ }
+ }
+
+ /* no switch found */
+ if (!dev->port_cnt)
+ return -ENODEV;
+
+ dev->port_mask = (1 << dev->port_cnt) - 1;
+
+ dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
+ dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
+
+ i = dev->mib_port_cnt;
+ dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
+ GFP_KERNEL);
+ if (!dev->ports)
+ return -ENOMEM;
+ for (i = 0; i < dev->mib_port_cnt; i++) {
+ dev->ports[i].mib.counters =
+ devm_kzalloc(dev->dev,
+ sizeof(u64) *
+ (TOTAL_SWITCH_COUNTER_NUM + 1),
+ GFP_KERNEL);
+ if (!dev->ports[i].mib.counters)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void ksz9477_switch_exit(struct ksz_device *dev)
+{
+ ksz9477_reset_switch(dev);
+}
+
+static const struct ksz_dev_ops ksz9477_dev_ops = {
+ .get_port_addr = ksz9477_get_port_addr,
+ .cfg_port_member = ksz9477_cfg_port_member,
+ .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
+ .port_setup = ksz9477_port_setup,
+ .shutdown = ksz9477_reset_switch,
+ .detect = ksz9477_switch_detect,
+ .init = ksz9477_switch_init,
+ .exit = ksz9477_switch_exit,
+};
+
+int ksz9477_switch_register(struct ksz_device *dev)
+{
+ return ksz_switch_register(dev, &ksz9477_dev_ops);
+}
+EXPORT_SYMBOL(ksz9477_switch_register);
+
+MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index d0d6920..966981a 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -1,5 +1,5 @@
/*
- * Microchip KSZ series register access through SPI
+ * Microchip KSZ9477 series register access through SPI
*
* Copyright (C) 2017 Microchip Technology Inc.
*
@@ -25,6 +25,7 @@
#include <linux/spi/spi.h>
#include "ksz_priv.h"
+#include "ksz_spi.h"
/* SPI frame opcodes */
#define KS_SPIOP_RD 3
@@ -34,8 +35,11 @@
#define SPI_ADDR_MASK (BIT(SPI_ADDR_SHIFT) - 1)
#define SPI_TURNAROUND_SHIFT 5
-static int ksz_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
- unsigned int len)
+/* Enough to read all switch port registers. */
+#define SPI_TX_BUF_LEN 0x100
+
+static int ksz9477_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
+ unsigned int len)
{
u32 txbuf;
int ret;
@@ -49,27 +53,36 @@ static int ksz_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
return ret;
}
-static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
- unsigned int len)
+static int ksz9477_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
+ unsigned int len)
{
- struct spi_device *spi = dev->priv;
+ u32 *txbuf = (u32 *)val;
- return ksz_spi_read_reg(spi, reg, data, len);
+ *txbuf = reg & SPI_ADDR_MASK;
+ *txbuf |= (KS_SPIOP_WR << SPI_ADDR_SHIFT);
+ *txbuf <<= SPI_TURNAROUND_SHIFT;
+ *txbuf = cpu_to_be32(*txbuf);
+
+ return spi_write(spi, txbuf, 4 + len);
}
-static int ksz_spi_read8(struct ksz_device *dev, u32 reg, u8 *val)
+static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
+ unsigned int len)
{
- return ksz_spi_read(dev, reg, val, 1);
+ struct spi_device *spi = dev->priv;
+
+ return ksz9477_spi_read_reg(spi, reg, data, len);
}
-static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
+static int ksz_spi_write(struct ksz_device *dev, u32 reg, void *data,
+ unsigned int len)
{
- int ret = ksz_spi_read(dev, reg, (u8 *)val, 2);
-
- if (!ret)
- *val = be16_to_cpu(*val);
+ struct spi_device *spi = dev->priv;
- return ret;
+ if (len > SPI_TX_BUF_LEN)
+ len = SPI_TX_BUF_LEN;
+ memcpy(&dev->txbuf[4], data, len);
+ return ksz9477_spi_write_reg(spi, reg, dev->txbuf, len);
}
static int ksz_spi_read24(struct ksz_device *dev, u32 reg, u32 *val)
@@ -87,72 +100,15 @@ static int ksz_spi_read24(struct ksz_device *dev, u32 reg, u32 *val)
return ret;
}
-static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
-{
- int ret = ksz_spi_read(dev, reg, (u8 *)val, 4);
-
- if (!ret)
- *val = be32_to_cpu(*val);
-
- return ret;
-}
-
-static int ksz_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
- unsigned int len)
-{
- u32 txbuf;
- u8 data[12];
- int i;
-
- txbuf = reg & SPI_ADDR_MASK;
- txbuf |= (KS_SPIOP_WR << SPI_ADDR_SHIFT);
- txbuf <<= SPI_TURNAROUND_SHIFT;
- txbuf = cpu_to_be32(txbuf);
-
- data[0] = txbuf & 0xFF;
- data[1] = (txbuf & 0xFF00) >> 8;
- data[2] = (txbuf & 0xFF0000) >> 16;
- data[3] = (txbuf & 0xFF000000) >> 24;
- for (i = 0; i < len; i++)
- data[i + 4] = val[i];
-
- return spi_write(spi, &data, 4 + len);
-}
-
-static int ksz_spi_write8(struct ksz_device *dev, u32 reg, u8 value)
-{
- struct spi_device *spi = dev->priv;
-
- return ksz_spi_write_reg(spi, reg, &value, 1);
-}
-
-static int ksz_spi_write16(struct ksz_device *dev, u32 reg, u16 value)
-{
- struct spi_device *spi = dev->priv;
-
- value = cpu_to_be16(value);
- return ksz_spi_write_reg(spi, reg, (u8 *)&value, 2);
-}
-
static int ksz_spi_write24(struct ksz_device *dev, u32 reg, u32 value)
{
- struct spi_device *spi = dev->priv;
-
/* make it to big endian 24bit from MSB */
value <<= 8;
value = cpu_to_be32(value);
- return ksz_spi_write_reg(spi, reg, (u8 *)&value, 3);
+ return ksz_spi_write(dev, reg, &value, 3);
}
-static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
-{
- struct spi_device *spi = dev->priv;
-
- value = cpu_to_be32(value);
- return ksz_spi_write_reg(spi, reg, (u8 *)&value, 4);
-}
-
-static const struct ksz_io_ops ksz_spi_ops = {
+static const struct ksz_io_ops ksz9477_spi_ops = {
.read8 = ksz_spi_read8,
.read16 = ksz_spi_read16,
.read24 = ksz_spi_read24,
@@ -161,21 +117,27 @@ static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
.write16 = ksz_spi_write16,
.write24 = ksz_spi_write24,
.write32 = ksz_spi_write32,
+ .get = ksz_spi_get,
+ .set = ksz_spi_set,
};
-static int ksz_spi_probe(struct spi_device *spi)
+static int ksz9477_spi_probe(struct spi_device *spi)
{
struct ksz_device *dev;
int ret;
- dev = ksz_switch_alloc(&spi->dev, &ksz_spi_ops, spi);
+ dev = ksz_switch_alloc(&spi->dev, &ksz9477_spi_ops, spi);
if (!dev)
return -ENOMEM;
if (spi->dev.platform_data)
dev->pdata = spi->dev.platform_data;
- ret = ksz_switch_register(dev);
+ dev->txbuf = devm_kzalloc(dev->dev, 4 + SPI_TX_BUF_LEN, GFP_KERNEL);
+
+ ret = ksz9477_switch_register(dev);
+
+ /* Main DSA driver may not be started yet. */
if (ret)
return ret;
@@ -184,7 +146,7 @@ static int ksz_spi_probe(struct spi_device *spi)
return 0;
}
-static int ksz_spi_remove(struct spi_device *spi)
+static int ksz9477_spi_remove(struct spi_device *spi)
{
struct ksz_device *dev = spi_get_drvdata(spi);
@@ -194,24 +156,33 @@ static int ksz_spi_remove(struct spi_device *spi)
return 0;
}
-static const struct of_device_id ksz_dt_ids[] = {
+static void ksz9477_spi_shutdown(struct spi_device *spi)
+{
+ struct ksz_device *dev = spi_get_drvdata(spi);
+
+ if (dev && dev->dev_ops->shutdown)
+ dev->dev_ops->shutdown(dev);
+}
+
+static const struct of_device_id ksz9477_dt_ids[] = {
{ .compatible = "microchip,ksz9477" },
{},
};
-MODULE_DEVICE_TABLE(of, ksz_dt_ids);
+MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
-static struct spi_driver ksz_spi_driver = {
+static struct spi_driver ksz9477_spi_driver = {
.driver = {
.name = "ksz9477-switch",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(ksz_dt_ids),
+ .of_match_table = of_match_ptr(ksz9477_dt_ids),
},
- .probe = ksz_spi_probe,
- .remove = ksz_spi_remove,
+ .probe = ksz9477_spi_probe,
+ .remove = ksz9477_spi_remove,
+ .shutdown = ksz9477_spi_shutdown,
};
-module_spi_driver(ksz_spi_driver);
+module_spi_driver(ksz9477_spi_driver);
MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
-MODULE_DESCRIPTION("Microchip KSZ Series Switch SPI access Driver");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch SPI access Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 7a0d10f..1c9c4c5 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -26,959 +26,202 @@
#include <linux/phy.h>
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
+#include <linux/of_net.h>
#include <net/dsa.h>
#include <net/switchdev.h>
#include "ksz_priv.h"
-static const struct {
- int index;
- char string[ETH_GSTRING_LEN];
-} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
- { 0x00, "rx_hi" },
- { 0x01, "rx_undersize" },
- { 0x02, "rx_fragments" },
- { 0x03, "rx_oversize" },
- { 0x04, "rx_jabbers" },
- { 0x05, "rx_symbol_err" },
- { 0x06, "rx_crc_err" },
- { 0x07, "rx_align_err" },
- { 0x08, "rx_mac_ctrl" },
- { 0x09, "rx_pause" },
- { 0x0A, "rx_bcast" },
- { 0x0B, "rx_mcast" },
- { 0x0C, "rx_ucast" },
- { 0x0D, "rx_64_or_less" },
- { 0x0E, "rx_65_127" },
- { 0x0F, "rx_128_255" },
- { 0x10, "rx_256_511" },
- { 0x11, "rx_512_1023" },
- { 0x12, "rx_1024_1522" },
- { 0x13, "rx_1523_2000" },
- { 0x14, "rx_2001" },
- { 0x15, "tx_hi" },
- { 0x16, "tx_late_col" },
- { 0x17, "tx_pause" },
- { 0x18, "tx_bcast" },
- { 0x19, "tx_mcast" },
- { 0x1A, "tx_ucast" },
- { 0x1B, "tx_deferred" },
- { 0x1C, "tx_total_col" },
- { 0x1D, "tx_exc_col" },
- { 0x1E, "tx_single_col" },
- { 0x1F, "tx_mult_col" },
- { 0x80, "rx_total" },
- { 0x81, "tx_total" },
- { 0x82, "rx_discards" },
- { 0x83, "tx_discards" },
-};
-
-static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
-{
- u8 data;
-
- ksz_read8(dev, addr, &data);
- if (set)
- data |= bits;
- else
- data &= ~bits;
- ksz_write8(dev, addr, data);
-}
-
-static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
-{
- u32 data;
-
- ksz_read32(dev, addr, &data);
- if (set)
- data |= bits;
- else
- data &= ~bits;
- ksz_write32(dev, addr, data);
-}
-
-static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
- bool set)
-{
- u32 addr;
- u8 data;
-
- addr = PORT_CTRL_ADDR(port, offset);
- ksz_read8(dev, addr, &data);
-
- if (set)
- data |= bits;
- else
- data &= ~bits;
-
- ksz_write8(dev, addr, data);
-}
-
-static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset,
- u32 bits, bool set)
-{
- u32 addr;
- u32 data;
-
- addr = PORT_CTRL_ADDR(port, offset);
- ksz_read32(dev, addr, &data);
-
- if (set)
- data |= bits;
- else
- data &= ~bits;
-
- ksz_write32(dev, addr, data);
-}
-
-static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int timeout)
-{
- u8 data;
-
- do {
- ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
- if (!(data & waiton))
- break;
- usleep_range(1, 10);
- } while (timeout-- > 0);
-
- if (timeout <= 0)
- return -ETIMEDOUT;
-
- return 0;
-}
-
-static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
-{
- struct ksz_device *dev = ds->priv;
- int ret;
-
- mutex_lock(&dev->vlan_mutex);
-
- ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
- ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
-
- /* wait to be cleared */
- ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
- if (ret < 0) {
- dev_dbg(dev->dev, "Failed to read vlan table\n");
- goto exit;
- }
-
- ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
- ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
- ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
-
- ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
-
-exit:
- mutex_unlock(&dev->vlan_mutex);
-
- return ret;
-}
-
-static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
-{
- struct ksz_device *dev = ds->priv;
- int ret;
-
- mutex_lock(&dev->vlan_mutex);
-
- ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
- ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
- ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
-
- ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
- ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
-
- /* wait to be cleared */
- ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
- if (ret < 0) {
- dev_dbg(dev->dev, "Failed to write vlan table\n");
- goto exit;
- }
-
- ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
-
- /* update vlan cache table */
- dev->vlan_cache[vid].table[0] = vlan_table[0];
- dev->vlan_cache[vid].table[1] = vlan_table[1];
- dev->vlan_cache[vid].table[2] = vlan_table[2];
-
-exit:
- mutex_unlock(&dev->vlan_mutex);
-
- return ret;
-}
-
-static void read_table(struct dsa_switch *ds, u32 *table)
-{
- struct ksz_device *dev = ds->priv;
-
- ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
- ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
- ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
- ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
-}
-
-static void write_table(struct dsa_switch *ds, u32 *table)
-{
- struct ksz_device *dev = ds->priv;
-
- ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
- ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
- ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
- ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
-}
-
-static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int timeout)
-{
- u32 data;
-
- do {
- ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
- if (!(data & waiton))
- break;
- usleep_range(1, 10);
- } while (timeout-- > 0);
-
- if (timeout <= 0)
- return -ETIMEDOUT;
-
- return 0;
-}
-
-static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int timeout)
+void ksz_update_port_member(struct ksz_device *dev, int port)
{
- u32 data;
-
- do {
- ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
- if (!(data & waiton))
- break;
- usleep_range(1, 10);
- } while (timeout-- > 0);
-
- if (timeout <= 0)
- return -ETIMEDOUT;
-
- return 0;
-}
-
-static int ksz9477_reset_switch(struct ksz_device *dev)
-{
- u8 data8;
- u16 data16;
- u32 data32;
-
- /* reset switch */
- ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
-
- /* turn off SPI DO Edge select */
- ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
- data8 &= ~SPI_AUTO_EDGE_DETECTION;
- ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
-
- /* default configuration */
- ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
- data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
- SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
- ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
-
- /* disable interrupts */
- ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
- ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
- ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
-
- /* set broadcast storm protection 10% rate */
- ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
- data16 &= ~BROADCAST_STORM_RATE;
- data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
- ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
-
- return 0;
-}
-
-static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
-{
- u8 data8;
- u16 data16;
-
- /* enable tag tail for host port */
- if (cpu_port)
- ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
- true);
-
- ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
-
- /* set back pressure */
- ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
-
- /* set flow control */
- ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
- PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true);
-
- /* enable broadcast storm limit */
- ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
-
- /* disable DiffServ priority */
- ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
-
- /* replace priority */
- ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
- false);
- ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
- MTI_PVID_REPLACE, false);
-
- /* enable 802.1p priority */
- ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
-
- /* configure MAC to 1G & RGMII mode */
- ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
- data8 |= PORT_RGMII_ID_EG_ENABLE;
- data8 &= ~PORT_MII_NOT_1GBIT;
- data8 &= ~PORT_MII_SEL_M;
- data8 |= PORT_RGMII_SEL;
- ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
-
- /* clear pending interrupts */
- ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
-}
-
-static void ksz9477_config_cpu_port(struct dsa_switch *ds)
-{
- struct ksz_device *dev = ds->priv;
+ struct ksz_port *p;
int i;
- ds->num_ports = dev->port_cnt;
-
- for (i = 0; i < ds->num_ports; i++) {
- if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
- dev->cpu_port = i;
+ for (i = 0; i < dev->port_cnt; i++) {
+ if (i == port || i == dev->cpu_port)
+ continue;
+ p = &dev->ports[i];
+ if (!(dev->member & (1 << i)))
+ continue;
- /* enable cpu port */
- ksz9477_port_setup(dev, i, true);
- }
+ /* Port is a member of the bridge and is forwarding. */
+ if (p->stp_state == BR_STATE_FORWARDING)
+ dev->dev_ops->cfg_port_member(dev, i, dev->member);
}
}
-static int ksz9477_setup(struct dsa_switch *ds)
+int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
{
struct ksz_device *dev = ds->priv;
- int ret = 0;
-
- dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
- dev->num_vlans, GFP_KERNEL);
- if (!dev->vlan_cache)
- return -ENOMEM;
-
- ret = ksz9477_reset_switch(dev);
- if (ret) {
- dev_err(ds->dev, "failed to reset switch\n");
- return ret;
- }
-
- /* accept packet up to 2000bytes */
- ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
-
- ksz9477_config_cpu_port(ds);
-
- ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
-
- /* queue based egress rate limit */
- ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+ u16 val = 0xffff;
- /* start switch */
- ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
-
- return 0;
-}
-
-static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds)
-{
- return DSA_TAG_PROTO_KSZ;
-}
-
-static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
-{
- struct ksz_device *dev = ds->priv;
- u16 val = 0;
-
- ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+ dev->dev_ops->r_phy(dev, addr, reg, &val);
return val;
}
-static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
- u16 val)
+int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
{
struct ksz_device *dev = ds->priv;
- ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+ dev->dev_ops->w_phy(dev, addr, reg, val);
return 0;
}
-static int ksz_enable_port(struct dsa_switch *ds, int port,
- struct phy_device *phy)
+int ksz_sset_count(struct dsa_switch *ds)
{
struct ksz_device *dev = ds->priv;
- /* setup slave port */
- ksz9477_port_setup(dev, port, false);
-
- return 0;
-}
-
-static void ksz_disable_port(struct dsa_switch *ds, int port,
- struct phy_device *phy)
-{
- struct ksz_device *dev = ds->priv;
-
- /* there is no port disable */
- ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true);
-}
-
-static int ksz_sset_count(struct dsa_switch *ds)
-{
- return TOTAL_SWITCH_COUNTER_NUM;
-}
-
-static void ksz9477_get_strings(struct dsa_switch *ds, int port, uint8_t *buf)
-{
- int i;
-
- for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
- memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
- ETH_GSTRING_LEN);
- }
+ return dev->mib_cnt;
}
-static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
- uint64_t *buf)
+int ksz_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *br)
{
struct ksz_device *dev = ds->priv;
- int i;
- u32 data;
- int timeout;
-
- mutex_lock(&dev->stats_mutex);
-
- for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
- data = MIB_COUNTER_READ;
- data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S);
- ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
-
- timeout = 1000;
- do {
- ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
- &data);
- usleep_range(1, 10);
- if (!(data & MIB_COUNTER_READ))
- break;
- } while (timeout-- > 0);
- /* failed to read MIB. get out of loop */
- if (!timeout) {
- dev_dbg(dev->dev, "Failed to get MIB\n");
- break;
- }
-
- /* count resets upon read */
- ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+ dev->br_member |= (1 << port);
- dev->mib_value[i] += (uint64_t)data;
- buf[i] = dev->mib_value[i];
- }
-
- mutex_unlock(&dev->stats_mutex);
-}
-
-static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
- u8 state)
-{
- struct ksz_device *dev = ds->priv;
- u8 data;
-
- ksz_pread8(dev, port, P_STP_CTRL, &data);
- data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
-
- switch (state) {
- case BR_STATE_DISABLED:
- data |= PORT_LEARN_DISABLE;
- break;
- case BR_STATE_LISTENING:
- data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
- break;
- case BR_STATE_LEARNING:
- data |= PORT_RX_ENABLE;
- break;
- case BR_STATE_FORWARDING:
- data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
- break;
- case BR_STATE_BLOCKING:
- data |= PORT_LEARN_DISABLE;
- break;
- default:
- dev_err(ds->dev, "invalid STP state: %d\n", state);
- return;
- }
+ /* port_stp_state_set() will be called after to put the port in
+ * appropriate state so there is no need to do anything.
+ */
- ksz_pwrite8(dev, port, P_STP_CTRL, data);
+ return 0;
}
-static void ksz_port_fast_age(struct dsa_switch *ds, int port)
+void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct net_device *br)
{
struct ksz_device *dev = ds->priv;
- u8 data8;
- ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
- data8 |= SW_FAST_AGING;
- ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+ dev->br_member &= ~(1 << port);
+ dev->member &= ~(1 << port);
- data8 &= ~SW_FAST_AGING;
- ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+ /* port_stp_state_set() will be called after to put the port in
+ * forwarding state so there is no need to do anything.
+ */
}
-static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
- bool flag)
+void ksz_port_fast_age(struct dsa_switch *ds, int port)
{
struct ksz_device *dev = ds->priv;
- if (flag) {
- ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
- PORT_VLAN_LOOKUP_VID_0, true);
- ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true);
- ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
- } else {
- ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
- ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false);
- ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
- PORT_VLAN_LOOKUP_VID_0, false);
- }
-
- return 0;
+ dev->dev_ops->flush_dyn_mac_table(dev, port);
}
-static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan,
- struct switchdev_trans *trans)
+int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
{
/* nothing needed */
return 0;
}
-static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan,
- struct switchdev_trans *trans)
-{
- struct ksz_device *dev = ds->priv;
- u32 vlan_table[3];
- u16 vid;
- bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
-
- for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
- if (get_vlan_table(ds, vid, vlan_table)) {
- dev_dbg(dev->dev, "Failed to get vlan table\n");
- return;
- }
-
- vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
- if (untagged)
- vlan_table[1] |= BIT(port);
- else
- vlan_table[1] &= ~BIT(port);
- vlan_table[1] &= ~(BIT(dev->cpu_port));
-
- vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
-
- if (set_vlan_table(ds, vid, vlan_table)) {
- dev_dbg(dev->dev, "Failed to set vlan table\n");
- return;
- }
-
- /* change PVID */
- if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
- ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
- }
-}
-
-static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan)
-{
- struct ksz_device *dev = ds->priv;
- bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
- u32 vlan_table[3];
- u16 vid;
- u16 pvid;
-
- ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
- pvid = pvid & 0xFFF;
-
- for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
- if (get_vlan_table(ds, vid, vlan_table)) {
- dev_dbg(dev->dev, "Failed to get vlan table\n");
- return -ETIMEDOUT;
- }
-
- vlan_table[2] &= ~BIT(port);
-
- if (pvid == vid)
- pvid = 1;
-
- if (untagged)
- vlan_table[1] &= ~BIT(port);
-
- if (set_vlan_table(ds, vid, vlan_table)) {
- dev_dbg(dev->dev, "Failed to set vlan table\n");
- return -ETIMEDOUT;
- }
- }
-
- ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
-
- return 0;
-}
-
-struct alu_struct {
- /* entry 1 */
- u8 is_static:1;
- u8 is_src_filter:1;
- u8 is_dst_filter:1;
- u8 prio_age:3;
- u32 _reserv_0_1:23;
- u8 mstp:3;
- /* entry 2 */
- u8 is_override:1;
- u8 is_use_fid:1;
- u32 _reserv_1_1:23;
- u8 port_forward:7;
- /* entry 3 & 4*/
- u32 _reserv_2_1:9;
- u8 fid:7;
- u8 mac[ETH_ALEN];
-};
-
-static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
- const unsigned char *addr, u16 vid)
-{
- struct ksz_device *dev = ds->priv;
- u32 alu_table[4];
- u32 data;
- int ret = 0;
-
- mutex_lock(&dev->alu_mutex);
-
- /* find any entry with mac & vid */
- data = vid << ALU_FID_INDEX_S;
- data |= ((addr[0] << 8) | addr[1]);
- ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
-
- data = ((addr[2] << 24) | (addr[3] << 16));
- data |= ((addr[4] << 8) | addr[5]);
- ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
-
- /* start read operation */
- ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
-
- /* wait to be finished */
- ret = wait_alu_ready(dev, ALU_START, 1000);
- if (ret < 0) {
- dev_dbg(dev->dev, "Failed to read ALU\n");
- goto exit;
- }
-
- /* read ALU entry */
- read_table(ds, alu_table);
-
- /* update ALU entry */
- alu_table[0] = ALU_V_STATIC_VALID;
- alu_table[1] |= BIT(port);
- if (vid)
- alu_table[1] |= ALU_V_USE_FID;
- alu_table[2] = (vid << ALU_V_FID_S);
- alu_table[2] |= ((addr[0] << 8) | addr[1]);
- alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
- alu_table[3] |= ((addr[4] << 8) | addr[5]);
-
- write_table(ds, alu_table);
-
- ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
-
- /* wait to be finished */
- ret = wait_alu_ready(dev, ALU_START, 1000);
- if (ret < 0)
- dev_dbg(dev->dev, "Failed to write ALU\n");
-
-exit:
- mutex_unlock(&dev->alu_mutex);
-
- return ret;
-}
-
-static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
- const unsigned char *addr, u16 vid)
-{
- struct ksz_device *dev = ds->priv;
- u32 alu_table[4];
- u32 data;
- int ret = 0;
-
- mutex_lock(&dev->alu_mutex);
-
- /* read any entry with mac & vid */
- data = vid << ALU_FID_INDEX_S;
- data |= ((addr[0] << 8) | addr[1]);
- ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
-
- data = ((addr[2] << 24) | (addr[3] << 16));
- data |= ((addr[4] << 8) | addr[5]);
- ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
-
- /* start read operation */
- ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
-
- /* wait to be finished */
- ret = wait_alu_ready(dev, ALU_START, 1000);
- if (ret < 0) {
- dev_dbg(dev->dev, "Failed to read ALU\n");
- goto exit;
- }
-
- ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
- if (alu_table[0] & ALU_V_STATIC_VALID) {
- ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
- ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
- ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
-
- /* clear forwarding port */
- alu_table[2] &= ~BIT(port);
-
- /* if there is no port to forward, clear table */
- if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
- alu_table[0] = 0;
- alu_table[1] = 0;
- alu_table[2] = 0;
- alu_table[3] = 0;
- }
- } else {
- alu_table[0] = 0;
- alu_table[1] = 0;
- alu_table[2] = 0;
- alu_table[3] = 0;
- }
-
- write_table(ds, alu_table);
-
- ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
-
- /* wait to be finished */
- ret = wait_alu_ready(dev, ALU_START, 1000);
- if (ret < 0)
- dev_dbg(dev->dev, "Failed to write ALU\n");
-
-exit:
- mutex_unlock(&dev->alu_mutex);
-
- return ret;
-}
-
-static void convert_alu(struct alu_struct *alu, u32 *alu_table)
-{
- alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
- alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
- alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
- alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
- ALU_V_PRIO_AGE_CNT_M;
- alu->mstp = alu_table[0] & ALU_V_MSTP_M;
-
- alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
- alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
- alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
-
- alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
-
- alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
- alu->mac[1] = alu_table[2] & 0xFF;
- alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
- alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
- alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
- alu->mac[5] = alu_table[3] & 0xFF;
-}
-
-static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
- dsa_fdb_dump_cb_t *cb, void *data)
+int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb,
+ void *data)
{
struct ksz_device *dev = ds->priv;
int ret = 0;
- u32 ksz_data;
- u32 alu_table[4];
+ u16 i = 0;
+ u16 entries = 0;
+ u8 timestamp = 0;
+ u8 fid;
+ u8 member;
struct alu_struct alu;
- int timeout;
mutex_lock(&dev->alu_mutex);
-
- /* start ALU search */
- ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
-
do {
- timeout = 1000;
- do {
- ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
- if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
- break;
- usleep_range(1, 10);
- } while (timeout-- > 0);
-
- if (!timeout) {
- dev_dbg(dev->dev, "Failed to search ALU\n");
- ret = -ETIMEDOUT;
- goto exit;
- }
-
- /* read ALU table */
- read_table(ds, alu_table);
-
- convert_alu(&alu, alu_table);
-
- if (alu.port_forward & BIT(port)) {
+ alu.is_static = false;
+ ret = dev->dev_ops->r_dyn_mac_table(dev, i, alu.mac, &fid,
+ &member, ×tamp,
+ &entries);
+ if (!ret && (member & BIT(port))) {
ret = cb(alu.mac, alu.fid, alu.is_static, data);
if (ret)
- goto exit;
+ break;
}
- } while (ksz_data & ALU_START);
-
-exit:
-
- /* stop ALU search */
- ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
-
+ i++;
+ } while (i < entries);
mutex_unlock(&dev->alu_mutex);
+ if (i >= entries)
+ ret = 0;
return ret;
}
-static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_mdb *mdb,
- struct switchdev_trans *trans)
+int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans)
{
/* nothing to do */
return 0;
}
-static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_mdb *mdb,
- struct switchdev_trans *trans)
+void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans)
{
struct ksz_device *dev = ds->priv;
- u32 static_table[4];
- u32 data;
+ struct alu_struct alu;
int index;
- u32 mac_hi, mac_lo;
-
- mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
- mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
- mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+ int empty = 0;
mutex_lock(&dev->alu_mutex);
for (index = 0; index < dev->num_statics; index++) {
- /* find empty slot first */
- data = (index << ALU_STAT_INDEX_S) |
- ALU_STAT_READ | ALU_STAT_START;
- ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
- /* wait to be finished */
- if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
- dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
- goto exit;
- }
-
- /* read ALU static table */
- read_table(ds, static_table);
-
- if (static_table[0] & ALU_V_STATIC_VALID) {
- /* check this has same vid & mac address */
- if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
- ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
- static_table[3] == mac_lo) {
- /* found matching one */
+ if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) {
+ /* Found one already in static MAC table. */
+ if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) &&
+ alu.fid == mdb->vid)
break;
- }
- } else {
- /* found empty one */
- break;
+ /* Remember the first empty entry. */
+ } else if (!empty) {
+ empty = index + 1;
}
}
/* no available entry */
- if (index == dev->num_statics)
+ if (index == dev->num_statics && !empty)
goto exit;
/* add entry */
- static_table[0] = ALU_V_STATIC_VALID;
- static_table[1] |= BIT(port);
- if (mdb->vid)
- static_table[1] |= ALU_V_USE_FID;
- static_table[2] = (mdb->vid << ALU_V_FID_S);
- static_table[2] |= mac_hi;
- static_table[3] = mac_lo;
-
- write_table(ds, static_table);
-
- data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
- ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+ if (index == dev->num_statics) {
+ index = empty - 1;
+ memset(&alu, 0, sizeof(alu));
+ memcpy(alu.mac, mdb->addr, ETH_ALEN);
+ alu.is_static = true;
+ }
+ alu.port_forward |= BIT(port);
+ if (mdb->vid) {
+ alu.is_use_fid = true;
- /* wait to be finished */
- if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
- dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+ /* Need a way to map VID to FID. */
+ alu.fid = mdb->vid;
+ }
+ dev->dev_ops->w_sta_mac_table(dev, index, &alu);
exit:
mutex_unlock(&dev->alu_mutex);
}
-static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_mdb *mdb)
+int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb)
{
struct ksz_device *dev = ds->priv;
- u32 static_table[4];
- u32 data;
+ struct alu_struct alu;
int index;
int ret = 0;
- u32 mac_hi, mac_lo;
-
- mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
- mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
- mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
mutex_lock(&dev->alu_mutex);
for (index = 0; index < dev->num_statics; index++) {
- /* find empty slot first */
- data = (index << ALU_STAT_INDEX_S) |
- ALU_STAT_READ | ALU_STAT_START;
- ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
- /* wait to be finished */
- ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
- if (ret < 0) {
- dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
- goto exit;
- }
-
- /* read ALU static table */
- read_table(ds, static_table);
-
- if (static_table[0] & ALU_V_STATIC_VALID) {
- /* check this has same vid & mac address */
-
- if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
- ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
- static_table[3] == mac_lo) {
- /* found matching one */
+ if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) {
+ /* Found one already in static MAC table. */
+ if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) &&
+ alu.fid == mdb->vid)
break;
- }
}
}
@@ -989,25 +232,10 @@ static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
}
/* clear port */
- static_table[1] &= ~BIT(port);
-
- if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
- /* delete entry */
- static_table[0] = 0;
- static_table[1] = 0;
- static_table[2] = 0;
- static_table[3] = 0;
- }
-
- write_table(ds, static_table);
-
- data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
- ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
- /* wait to be finished */
- ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
- if (ret < 0)
- dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+ alu.port_forward &= ~BIT(port);
+ if (!alu.port_forward)
+ alu.is_static = false;
+ dev->dev_ops->w_sta_mac_table(dev, index, &alu);
exit:
mutex_unlock(&dev->alu_mutex);
@@ -1015,125 +243,30 @@ static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
return ret;
}
-static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
- struct dsa_mall_mirror_tc_entry *mirror,
- bool ingress)
+int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
{
struct ksz_device *dev = ds->priv;
- if (ingress)
- ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
- else
- ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
-
- ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
-
- /* configure mirror port */
- ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
- PORT_MIRROR_SNIFFER, true);
+ /* setup slave port */
+ dev->dev_ops->port_setup(dev, port, false);
- ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+ /* port_stp_state_set() will be called after to enable the port so
+ * there is no need to do anything.
+ */
return 0;
}
-static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
- struct dsa_mall_mirror_tc_entry *mirror)
+void ksz_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
{
struct ksz_device *dev = ds->priv;
- u8 data;
-
- if (mirror->ingress)
- ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
- else
- ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
- ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+ dev->on_ports &= ~(1 << port);
+ dev->live_ports &= ~(1 << port);
- if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
- ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
- PORT_MIRROR_SNIFFER, false);
-}
-
-static const struct dsa_switch_ops ksz_switch_ops = {
- .get_tag_protocol = ksz9477_get_tag_protocol,
- .setup = ksz9477_setup,
- .phy_read = ksz9477_phy_read16,
- .phy_write = ksz9477_phy_write16,
- .port_enable = ksz_enable_port,
- .port_disable = ksz_disable_port,
- .get_strings = ksz9477_get_strings,
- .get_ethtool_stats = ksz_get_ethtool_stats,
- .get_sset_count = ksz_sset_count,
- .port_stp_state_set = ksz9477_port_stp_state_set,
- .port_fast_age = ksz_port_fast_age,
- .port_vlan_filtering = ksz9477_port_vlan_filtering,
- .port_vlan_prepare = ksz_port_vlan_prepare,
- .port_vlan_add = ksz9477_port_vlan_add,
- .port_vlan_del = ksz9477_port_vlan_del,
- .port_fdb_dump = ksz9477_port_fdb_dump,
- .port_fdb_add = ksz9477_port_fdb_add,
- .port_fdb_del = ksz9477_port_fdb_del,
- .port_mdb_prepare = ksz_port_mdb_prepare,
- .port_mdb_add = ksz9477_port_mdb_add,
- .port_mdb_del = ksz9477_port_mdb_del,
- .port_mirror_add = ksz9477_port_mirror_add,
- .port_mirror_del = ksz9477_port_mirror_del,
-};
-
-struct ksz_chip_data {
- u32 chip_id;
- const char *dev_name;
- int num_vlans;
- int num_alus;
- int num_statics;
- int cpu_ports;
- int port_cnt;
-};
-
-static const struct ksz_chip_data ksz9477_switch_chips[] = {
- {
- .chip_id = 0x00947700,
- .dev_name = "KSZ9477",
- .num_vlans = 4096,
- .num_alus = 4096,
- .num_statics = 16,
- .cpu_ports = 0x7F, /* can be configured as cpu port */
- .port_cnt = 7, /* total physical port count */
- },
-};
-
-static int ksz9477_switch_init(struct ksz_device *dev)
-{
- int i;
-
- mutex_init(&dev->reg_mutex);
- mutex_init(&dev->stats_mutex);
- mutex_init(&dev->alu_mutex);
- mutex_init(&dev->vlan_mutex);
-
- dev->ds->ops = &ksz_switch_ops;
-
- for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
- const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
-
- if (dev->chip_id == chip->chip_id) {
- dev->name = chip->dev_name;
- dev->num_vlans = chip->num_vlans;
- dev->num_alus = chip->num_alus;
- dev->num_statics = chip->num_statics;
- dev->port_cnt = chip->port_cnt;
- dev->cpu_ports = chip->cpu_ports;
-
- break;
- }
- }
-
- /* no switch found */
- if (!dev->port_cnt)
- return -ENODEV;
-
- return 0;
+ /* port_stp_state_set() will be called after to disable the port so
+ * there is no need to do anything.
+ */
}
struct ksz_device *ksz_switch_alloc(struct device *base,
@@ -1162,53 +295,43 @@ struct ksz_device *ksz_switch_alloc(struct device *base,
}
EXPORT_SYMBOL(ksz_switch_alloc);
-int ksz_switch_detect(struct ksz_device *dev)
-{
- u8 data8;
- u32 id32;
- int ret;
-
- /* turn off SPI DO Edge select */
- ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
- if (ret)
- return ret;
-
- data8 &= ~SPI_AUTO_EDGE_DETECTION;
- ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
- if (ret)
- return ret;
-
- /* read chip id */
- ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
- if (ret)
- return ret;
-
- dev->chip_id = id32;
-
- return 0;
-}
-EXPORT_SYMBOL(ksz_switch_detect);
-
-int ksz_switch_register(struct ksz_device *dev)
+int ksz_switch_register(struct ksz_device *dev,
+ const struct ksz_dev_ops *ops)
{
int ret;
if (dev->pdata)
dev->chip_id = dev->pdata->chip_id;
- if (ksz_switch_detect(dev))
+ dev->dev_ops = ops;
+
+ if (dev->dev_ops->detect(dev))
return -EINVAL;
- ret = ksz9477_switch_init(dev);
+ ret = dev->dev_ops->init(dev);
if (ret)
return ret;
- return dsa_register_switch(dev->ds);
+ dev->interface = PHY_INTERFACE_MODE_MII;
+ if (dev->dev->of_node) {
+ ret = of_get_phy_mode(dev->dev->of_node);
+ if (ret >= 0)
+ dev->interface = ret;
+ }
+
+ ret = dsa_register_switch(dev->ds);
+ if (ret) {
+ dev->dev_ops->exit(dev);
+ return ret;
+ }
+
+ return 0;
}
EXPORT_SYMBOL(ksz_switch_register);
void ksz_switch_remove(struct ksz_device *dev)
{
+ dev->dev_ops->exit(dev);
dsa_unregister_switch(dev->ds);
}
EXPORT_SYMBOL(ksz_switch_remove);
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
new file mode 100644
index 0000000..1c1cbad
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -0,0 +1,230 @@
+/*
+ * Microchip switch driver common header
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __KSZ_COMMON_H
+#define __KSZ_COMMON_H
+
+void ksz_update_port_member(struct ksz_device *dev, int port);
+
+/* Common DSA access functions */
+
+int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
+int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
+int ksz_sset_count(struct dsa_switch *ds);
+int ksz_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *br);
+void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct net_device *br);
+void ksz_port_fast_age(struct dsa_switch *ds, int port);
+int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans);
+int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb,
+ void *data);
+int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans);
+void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct switchdev_trans *trans);
+int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb);
+int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+void ksz_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+
+/* Common register access functions */
+
+static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->read8(dev, reg, val);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->read16(dev, reg, val);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_read24(struct ksz_device *dev, u32 reg, u32 *val)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->read24(dev, reg, val);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->read32(dev, reg, val);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->write8(dev, reg, value);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->write16(dev, reg, value);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_write24(struct ksz_device *dev, u32 reg, u32 value)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->write24(dev, reg, value);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->write32(dev, reg, value);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_get(struct ksz_device *dev, u32 reg, void *data,
+ size_t len)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->get(dev, reg, data, len);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline int ksz_set(struct ksz_device *dev, u32 reg, void *data,
+ size_t len)
+{
+ int ret;
+
+ mutex_lock(&dev->reg_mutex);
+ ret = dev->ops->set(dev, reg, data, len);
+ mutex_unlock(&dev->reg_mutex);
+
+ return ret;
+}
+
+static inline void ksz_pread8(struct ksz_device *dev, int port, int offset,
+ u8 *data)
+{
+ ksz_read8(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pread16(struct ksz_device *dev, int port, int offset,
+ u16 *data)
+{
+ ksz_read16(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pread32(struct ksz_device *dev, int port, int offset,
+ u32 *data)
+{
+ ksz_read32(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite8(struct ksz_device *dev, int port, int offset,
+ u8 data)
+{
+ ksz_write8(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite16(struct ksz_device *dev, int port, int offset,
+ u16 data)
+{
+ ksz_write16(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
+ u32 data)
+{
+ ksz_write32(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+ u8 data;
+
+ ksz_read8(dev, addr, &data);
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ ksz_write8(dev, addr, data);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+ bool set)
+{
+ u32 addr;
+ u8 data;
+
+ addr = dev->dev_ops->get_port_addr(port, offset);
+ ksz_read8(dev, addr, &data);
+
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+
+ ksz_write8(dev, addr, data);
+}
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index d461468..4126749 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -34,6 +34,30 @@ struct vlan_table {
u32 table[3];
};
+struct ksz_port_mib {
+ u8 cnt_ptr;
+ u64 *counters;
+};
+
+struct ksz_port {
+ u16 member;
+ u16 vid_member;
+ int stp_state;
+ u16 speed;
+ u8 duplex;
+ u8 flow_ctrl;
+
+ u32 on:1; /* port is not disabled by hardware */
+ u32 phy:1; /* port has a PHY */
+ u32 fiber:1; /* port is fiber */
+ u32 sgmii:1; /* port is SGMII */
+ u32 force:1;
+ u32 link_down:1; /* link just goes down */
+ u32 link_up:1; /* link is up */
+
+ struct ksz_port_mib mib;
+};
+
struct ksz_device {
struct dsa_switch *ds;
struct ksz_platform_data *pdata;
@@ -44,6 +68,7 @@ struct ksz_device {
struct mutex alu_mutex; /* ALU access */
struct mutex vlan_mutex; /* vlan access */
const struct ksz_io_ops *ops;
+ const struct ksz_dev_ops *dev_ops;
struct device *dev;
@@ -56,11 +81,37 @@ struct ksz_device {
int num_statics;
int cpu_port; /* port connected to CPU */
int cpu_ports; /* port bitmap can be cpu port */
+ int phy_port_cnt;
int port_cnt;
+ int reg_mib_cnt;
+ int mib_cnt;
+ int mib_port_cnt;
+ int last_port; /* ports after that not used */
+ int interface;
+ u32 regs_size;
struct vlan_table *vlan_cache;
u64 mib_value[TOTAL_SWITCH_COUNTER_NUM];
+
+ u8 *txbuf;
+
+ struct ksz_port *ports;
+ struct timer_list mib_read_timer;
+ struct work_struct mib_read;
+ unsigned long mib_read_interval;
+ u16 br_member;
+ u16 member;
+ u16 live_ports;
+ u16 on_ports; /* ports enabled by DSA */
+ u16 rx_ports;
+ u16 tx_ports;
+ u16 mirror_rx;
+ u16 mirror_tx;
+ u32 features; /* chip specific features */
+ u32 overrides; /* chip functions set by user */
+ u16 host_mask;
+ u16 port_mask;
};
struct ksz_io_ops {
@@ -72,140 +123,60 @@ struct ksz_io_ops {
int (*write16)(struct ksz_device *dev, u32 reg, u16 value);
int (*write24)(struct ksz_device *dev, u32 reg, u32 value);
int (*write32)(struct ksz_device *dev, u32 reg, u32 value);
- int (*phy_read16)(struct ksz_device *dev, int addr, int reg,
- u16 *value);
- int (*phy_write16)(struct ksz_device *dev, int addr, int reg,
- u16 value);
+ int (*get)(struct ksz_device *dev, u32 reg, void *data, size_t len);
+ int (*set)(struct ksz_device *dev, u32 reg, void *data, size_t len);
+};
+
+struct alu_struct {
+ /* entry 1 */
+ u8 is_static:1;
+ u8 is_src_filter:1;
+ u8 is_dst_filter:1;
+ u8 prio_age:3;
+ u32 _reserv_0_1:23;
+ u8 mstp:3;
+ /* entry 2 */
+ u8 is_override:1;
+ u8 is_use_fid:1;
+ u32 _reserv_1_1:23;
+ u8 port_forward:7;
+ /* entry 3 & 4*/
+ u32 _reserv_2_1:9;
+ u8 fid:7;
+ u8 mac[ETH_ALEN];
+};
+
+struct ksz_dev_ops {
+ u32 (*get_port_addr)(int port, int offset);
+ void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
+ void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
+ void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
+ void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
+ void (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
+ int (*r_dyn_mac_table)(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+ u8 *fid, u8 *src_port, u8 *timestamp,
+ u16 *entries);
+ int (*r_sta_mac_table)(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu);
+ void (*w_sta_mac_table)(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu);
+ void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr,
+ u64 *cnt);
+ void (*r_mib_pkt)(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt);
+ void (*port_init_cnt)(struct ksz_device *dev, int port);
+ int (*shutdown)(struct ksz_device *dev);
+ int (*detect)(struct ksz_device *dev);
+ int (*init)(struct ksz_device *dev);
+ void (*exit)(struct ksz_device *dev);
};
struct ksz_device *ksz_switch_alloc(struct device *base,
const struct ksz_io_ops *ops, void *priv);
-int ksz_switch_detect(struct ksz_device *dev);
-int ksz_switch_register(struct ksz_device *dev);
+int ksz_switch_register(struct ksz_device *dev,
+ const struct ksz_dev_ops *ops);
void ksz_switch_remove(struct ksz_device *dev);
-static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read8(dev, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read16(dev, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int ksz_read24(struct ksz_device *dev, u32 reg, u32 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read24(dev, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read32(dev, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write8(dev, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write16(dev, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int ksz_write24(struct ksz_device *dev, u32 reg, u32 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write24(dev, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write32(dev, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline void ksz_pread8(struct ksz_device *dev, int port, int offset,
- u8 *data)
-{
- ksz_read8(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pread16(struct ksz_device *dev, int port, int offset,
- u16 *data)
-{
- ksz_read16(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pread32(struct ksz_device *dev, int port, int offset,
- u32 *data)
-{
- ksz_read32(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite8(struct ksz_device *dev, int port, int offset,
- u8 data)
-{
- ksz_write8(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite16(struct ksz_device *dev, int port, int offset,
- u16 data)
-{
- ksz_write16(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
- u32 data)
-{
- ksz_write32(dev, PORT_CTRL_ADDR(port, offset), data);
-}
+int ksz9477_switch_register(struct ksz_device *dev);
#endif
diff --git a/drivers/net/dsa/microchip/ksz_spi.h b/drivers/net/dsa/microchip/ksz_spi.h
new file mode 100644
index 0000000..a05d404
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_spi.h
@@ -0,0 +1,82 @@
+/*
+ * Microchip KSZ series SPI access common header
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ * Tristram Ha <Tristram.Ha@microchip.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __KSZ_SPI_H
+#define __KSZ_SPI_H
+
+/* Chip dependent SPI access */
+static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
+ unsigned int len);
+static int ksz_spi_write(struct ksz_device *dev, u32 reg, void *data,
+ unsigned int len);
+
+static int ksz_spi_read8(struct ksz_device *dev, u32 reg, u8 *val)
+{
+ return ksz_spi_read(dev, reg, val, 1);
+}
+
+static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
+{
+ int ret = ksz_spi_read(dev, reg, (u8 *)val, 2);
+
+ if (!ret)
+ *val = be16_to_cpu(*val);
+
+ return ret;
+}
+
+static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
+{
+ int ret = ksz_spi_read(dev, reg, (u8 *)val, 4);
+
+ if (!ret)
+ *val = be32_to_cpu(*val);
+
+ return ret;
+}
+
+static int ksz_spi_write8(struct ksz_device *dev, u32 reg, u8 value)
+{
+ return ksz_spi_write(dev, reg, &value, 1);
+}
+
+static int ksz_spi_write16(struct ksz_device *dev, u32 reg, u16 value)
+{
+ value = cpu_to_be16(value);
+ return ksz_spi_write(dev, reg, &value, 2);
+}
+
+static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
+{
+ value = cpu_to_be32(value);
+ return ksz_spi_write(dev, reg, &value, 4);
+}
+
+static int ksz_spi_get(struct ksz_device *dev, u32 reg, void *data, size_t len)
+{
+ return ksz_spi_read(dev, reg, data, len);
+}
+
+static int ksz_spi_set(struct ksz_device *dev, u32 reg, void *data, size_t len)
+{
+ return ksz_spi_write(dev, reg, data, len);
+}
+
+#endif
--
1.9.1
next prev parent reply other threads:[~2017-10-06 20:36 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-06 20:32 [PATCH v1 RFC 0/7] Modify KSZ9477 DSA driver in preparation to add other KSZ switch drivers Tristram.Ha
2017-10-06 20:32 ` [PATCH v1 RFC 1/7] Replace license with GPL Tristram.Ha
2017-10-09 9:18 ` David Laight
2017-10-09 18:40 ` Tristram.Ha
2017-10-09 19:40 ` Florian Fainelli
2017-10-14 19:41 ` Andrew Lunn
2017-10-09 19:54 ` Pavel Machek
2017-10-09 19:58 ` Woojung.Huh
2017-10-06 20:33 ` [PATCH v1 RFC 2/7] Clean up code according to patch check suggestions Tristram.Ha
2017-10-09 19:54 ` Pavel Machek
2017-10-09 19:54 ` Florian Fainelli
2017-10-14 19:42 ` Andrew Lunn
2017-10-06 20:33 ` [PATCH v1 RFC 3/7] Rename some functions with ksz9477 prefix Tristram.Ha
2017-10-09 19:54 ` Pavel Machek
2017-10-09 19:56 ` Florian Fainelli
2017-10-14 19:44 ` Andrew Lunn
2017-10-06 20:33 ` [PATCH v1 RFC 4/7] Rename ksz_spi.c to ksz9477_spi.c Tristram.Ha
2017-10-09 19:54 ` Pavel Machek
2017-10-09 19:56 ` Florian Fainelli
2017-10-14 19:45 ` Andrew Lunn
2017-10-06 20:33 ` Tristram.Ha [this message]
2017-10-09 19:54 ` [PATCH v1 RFC 5/7] Break KSZ9477 DSA driver into two files Pavel Machek
2017-10-09 20:01 ` Florian Fainelli
2017-10-14 19:52 ` Andrew Lunn
2017-10-06 20:33 ` [PATCH v1 RFC 6/7] Add MIB counter reading support Tristram.Ha
2017-10-09 19:54 ` Pavel Machek
2017-10-09 20:07 ` Florian Fainelli
2017-10-14 20:07 ` Andrew Lunn
2017-10-06 20:33 ` [PATCH v1 RFC 7/7] Modify tag_ksz.c so that tail tag code can be used by other KSZ switch drivers Tristram.Ha
2017-10-11 20:45 ` Pavel Machek
2017-10-18 18:02 ` Tristram.Ha
2017-10-14 20:15 ` Andrew Lunn
2017-10-09 19:58 ` [PATCH v1 RFC 0/7] Modify KSZ9477 DSA driver in preparation to add " Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507321985-15097-6-git-send-email-Tristram.Ha@microchip.com \
--to=tristram.ha@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=muvarov@gmail.com \
--cc=nathan.leigh.conrad@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=ruediger.schmitt@philips.com \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).