From: Salil Mehta <salil.mehta@huawei.com>
To: <davem@davemloft.net>
Cc: <salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
<lipeng321@huawei.com>, <mehta.salil.lnk@gmail.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-rdma@vger.kernel.org>, <linuxarm@huawei.com>
Subject: [PATCH net-next 4/8] net: hns3: Add HNS3 VF driver to kernel build framework
Date: Sun, 3 Dec 2017 12:33:03 +0000 [thread overview]
Message-ID: <20171203123307.19820-5-salil.mehta@huawei.com> (raw)
In-Reply-To: <20171203123307.19820-1-salil.mehta@huawei.com>
This patch introduces the new Makefiles and updates existing
Makefiles required to build the HNS3 Virtual Function driver.
This also updates the Kconfig for introduction of new menuconfig
entries related to VF driver.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
---
drivers/net/ethernet/hisilicon/Kconfig | 28 +++++++++++++++-------
drivers/net/ethernet/hisilicon/hns3/Makefile | 1 +
.../net/ethernet/hisilicon/hns3/hns3vf/Makefile | 8 +++++++
3 files changed, 28 insertions(+), 9 deletions(-)
create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 30000b6aa7b8..8bcf470ff5f3 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -94,15 +94,6 @@ config HNS3_HCLGE
compatibility layer. The engine would be used in Hisilicon hip08 family of
SoCs and further upcoming SoCs.
-config HNS3_ENET
- tristate "Hisilicon HNS3 Ethernet Device Support"
- depends on 64BIT && PCI
- depends on HNS3 && HNS3_HCLGE
- ---help---
- This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08
- family of SoCs. This module depends upon HNAE3 driver to access the HNAE3
- devices and their associated operations.
-
config HNS3_DCB
bool "Hisilicon HNS3 Data Center Bridge Support"
default n
@@ -112,4 +103,23 @@ config HNS3_DCB
If unsure, say N.
+config HNS3_HCLGEVF
+ tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support"
+ depends on PCI_MSI
+ depends on HNS3
+ depends on HNS3_HCLGE
+ ---help---
+ This selects the HNS3 VF drivers network acceleration engine & its hardware
+ compatibility layer. The engine would be used in Hisilicon hip08 family of
+ SoCs and further upcoming SoCs.
+
+config HNS3_ENET
+ tristate "Hisilicon HNS3 Ethernet Device Support"
+ depends on 64BIT && PCI
+ depends on HNS3
+ ---help---
+ This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08
+ family of SoCs. This module depends upon HNAE3 driver to access the HNAE3
+ devices and their associated operations.
+
endif # NET_VENDOR_HISILICON
diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile
index a9349e1f3e51..244664b5f24f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/Makefile
@@ -3,5 +3,6 @@
#
obj-$(CONFIG_HNS3) += hns3pf/
+obj-$(CONFIG_HNS3) += hns3vf/
obj-$(CONFIG_HNS3) += hnae3.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
new file mode 100644
index 000000000000..a513d009de8a
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the HISILICON network device drivers.
+#
+
+ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
+
+obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
+hclgevf-objs = hclgevf_main.o hclgevf_cmd.o hclgevf_mbx.o
\ No newline at end of file
--
2.11.0
next prev parent reply other threads:[~2017-12-03 12:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-03 12:32 [PATCH net-next 0/8] Hisilicon Network Subsystem 3 VF Ethernet Driver Salil Mehta
2017-12-03 12:33 ` [PATCH net-next 1/8] net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface Salil Mehta
2017-12-05 16:37 ` David Miller
2017-12-05 17:11 ` Salil Mehta
2017-12-03 12:33 ` [PATCH net-next 2/8] net: hns3: Add mailbox support to VF driver Salil Mehta
2017-12-03 12:33 ` [PATCH net-next 3/8] net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support Salil Mehta
2017-12-03 12:33 ` Salil Mehta [this message]
2017-12-03 12:33 ` [PATCH net-next 5/8] net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC Salil Mehta
2017-12-03 12:33 ` [PATCH net-next 6/8] net: hns3: Add mailbox support to PF driver Salil Mehta
2017-12-03 12:33 ` [PATCH net-next 7/8] net: hns3: Change PF to add ring-vect binding & resetQ to mailbox Salil Mehta
2017-12-03 12:33 ` [PATCH net-next 8/8] net: hns3: Add mailbox interrupt handling to PF driver Salil Mehta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171203123307.19820-5-salil.mehta@huawei.com \
--to=salil.mehta@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=mehta.salil.lnk@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).