[RFC PATCH v3 1/7] ktask: add documentation

From: Daniel Jordan <daniel.m.jordan@oracle.com>
To: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Cc: aaron.lu@intel.com, akpm@linux-foundation.org,
	dave.hansen@linux.intel.com, mgorman@techsingularity.net,
	mhocko@kernel.org, mike.kravetz@oracle.com,
	pasha.tatashin@oracle.com, steven.sistare@oracle.com,
	tim.c.chen@intel.com
Subject: [RFC PATCH v3 1/7] ktask: add documentation
Date: Tue,  5 Dec 2017 14:52:14 -0500	[thread overview]
Message-ID: <20171205195220.28208-2-daniel.m.jordan@oracle.com> (raw)
In-Reply-To: <20171205195220.28208-1-daniel.m.jordan@oracle.com>

Motivates and explains the ktask API for kernel clients.

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Steve Sistare <steven.sistare@oracle.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Tim Chen <tim.c.chen@intel.com>
---
 Documentation/core-api/index.rst |   1 +
 Documentation/core-api/ktask.rst | 173 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 174 insertions(+)
 create mode 100644 Documentation/core-api/ktask.rst

diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index d5bbe035316d..255724095814 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -15,6 +15,7 @@ Core utilities
    assoc_array
    atomic_ops
    cpu_hotplug
+   ktask
    local_ops
    workqueue
    genericirq
diff --git a/Documentation/core-api/ktask.rst b/Documentation/core-api/ktask.rst
new file mode 100644
index 000000000000..703f200c7d36
--- /dev/null
+++ b/Documentation/core-api/ktask.rst
@@ -0,0 +1,173 @@
+============================================
+ktask: parallelize CPU-intensive kernel work
+============================================
+
+:Date: December, 2017
+:Author: Daniel Jordan <daniel.m.jordan@oracle.com>
+
+
+Introduction
+============
+
+ktask is a generic framework for parallelizing CPU-intensive work in the
+kernel.  The intended use is for big machines that can use their CPU power to
+speed up large tasks that can't otherwise be multithreaded in userland.  The
+API is generic enough to add concurrency to many different kinds of tasks--for
+example, zeroing a range of pages or evicting a list of inodes--and aims to
+save its clients the trouble of splitting up the work, choosing the number of
+threads to use, maintaining an efficient concurrency level, starting these
+threads, and load balancing the work between them.
+
+
+Motivation
+==========
+
+To ensure that applications and the kernel itself continue to perform well as
+core counts and memory sizes increase, the kernel needs to scale.  For example,
+when a system call requests a certain fraction of system resources, the kernel
+should respond in kind by devoting a similar fraction of system resources to
+service the request.
+
+Before ktask, for example, when booting a NUMA machine with many CPUs, only one
+thread per node was used to initialize struct pages.  Using additional CPUs
+that would otherwise be idle until the machine is fully up avoids a needless
+bottleneck during system boot and allows the kernel to take advantage of unused
+memory bandwidth.
+
+Why a new framework when there are existing kernel APIs for managing
+concurrency and other ways to improve performance?  Of the existing facilities,
+workqueues aren't designed to divide work up (although ktask is built on
+unbound workqueues), and kthread_worker supports only one thread.  Existing
+scalability techniques in the kernel such as doing work or holding locks in
+batches are helpful and should be applied first for performance problems, but
+eventually a single thread hits a wall.
+
+
+Concept
+=======
+
+A little terminology up front:  A 'task' is the total work there is to do and a
+'chunk' is a unit of work given to a thread.
+
+To complete a task using the ktask framework, a client provides a thread
+function that is responsible for completing one chunk.  The thread function is
+defined in a standard way, with start and end arguments that delimit the chunk
+as well as an argument that the client uses to pass data specific to the task.
+
+In addition, the client supplies an object representing the start of the task
+and an iterator function that knows how to advance some number of units in the
+task to yield another object representing the new task position.  The framework
+uses the start object and iterator internally to divide the task into chunks.
+
+Finally, the client passes the total task size and a minimum chunk size to
+indicate the minimum amount of work that's appropriate to do in one chunk.  The
+sizes are given in task-specific units (e.g. pages, inodes, bytes).  The
+framework uses these sizes, along with the number of online CPUs and an
+internal maximum number of threads, to decide how many threads to start and how
+many chunks to divide the task into.
+
+For example, consider the task of clearing a gigantic page.  This used to be
+done in a single thread with a for loop that calls a page clearing function for
+each constituent base page.  To parallelize with ktask, the client first moves
+the for loop to the thread function, adapting it to operate on the range passed
+to the function.  In this simple case, the thread function's start and end
+arguments are just addresses delimiting the portion of the gigantic page to
+clear.  Then, where the for loop used to be, the client calls into ktask with
+the start address of the gigantic page, the total size of the gigantic page,
+and the thread function.  Internally, ktask will divide the address range into
+an appropriate number of chunks and start an appropriate number of threads to
+complete these chunks.
+
+
+Configuration
+=============
+
+To use ktask, configure the kernel with CONFIG_KTASK=y.
+
+If CONFIG_KTASK=n, calls to the ktask API are simply #define'd to run the
+thread function that the client provides so that the task is completed without
+concurrency in the current thread.
+
+
+Interface
+=========
+
+.. Include ktask.h inline here.  This file is heavily commented and documents
+.. the ktask interface.
+.. kernel-doc:: include/linux/ktask.h
+
+
+Resource Limits and Auto-Tuning
+===============================
+
+ktask has resource limits on the number of workqueue items it queues.  In
+ktask, a workqueue item is a thread that runs chunks of the task until the task
+is finished.
+
+These limits support the different ways ktask uses workqueues:
+ - ktask_run to run threads on the calling thread's node.
+ - ktask_run_numa to run threads on the node(s) specified.
+ - ktask_run_numa with nid=NUMA_NO_NODE to run threads on any node in the
+   system.
+
+To support these different ways of queueing work while maintaining an efficient
+concurrency level, we need both system-wide and per-node limits on the number
+of threads.  Without per-node limits, a node might become oversubscribed
+despite ktask staying within the system-wide limit, and without a system-wide
+limit, we can't properly account for work that can run on any node.
+
+The system-wide limit is based on the total number of CPUs, and the per-node
+limit on the CPU count for each node.  A per-node work item counts against the
+system-wide limit.  Workqueue's max_active can't accommodate both types of
+limit, no matter how many workqueues are used, so ktask implements its own.
+
+If a per-node limit is reached, the work item is allowed to run anywhere on the
+machine to avoid overwhelming the node.  If the global limit is also reached,
+ktask won't queue additional work items until we fall below the limit again.
+
+These limits apply only to workqueue items--that is, additional threads beyond
+the one starting the task.  That way, one thread per task is always allowed to
+run.
+
+Within the resource limits, ktask uses a default maximum number of threads per
+task to avoid disturbing other processes on the system.  Callers can change the
+limit with ktask_ctl_set_max_threads.  For example, this might be used to raise
+the maximum number of threads for a boot-time initialization task when more
+CPUs than usual are idle.
+
+
+Backward Compatibility
+======================
+
+ktask is written so that existing calls to the API will be backwards compatible
+should the API gain new features in the future.  This is accomplished by
+restricting API changes to members of struct ktask_ctl and having clients make
+an opaque initialization call (DEFINE_KTASK_CTL).  This initialization can then
+be modified to include any new arguments so that existing call sites stay the
+same.
+
+
+Error Handling
+==============
+
+Calls to ktask fail only if the provided thread function fails.  In particular,
+ktask avoids allocating memory internally during a task, so it's safe to use in
+sensitive contexts.
+
+To avoid adding features before they're used, ktask currently has only basic
+error handling.  Each call to ktask_run and ktask_run_numa returns a simple
+error code, KTASK_RETURN_SUCCESS or KTASK_RETURN_ERROR.  As usage of the
+framework expands, however, error handling will likely need to be enhanced in
+two ways.
+
+First, ktask may need client-specific error reporting.  It's possible for tasks
+to fail for different reasons, so the framework should have a way to
+communicate client-specific error information.  For this purpose, allow the
+client to pass a pointer for its own error information in struct ktask_ctl.
+
+Second, tasks can fail midway through their work.  To recover, the finished
+chunks of work need to be undone in a task-specific way, so ktask should allow
+clients to pass an "undo" callback that is responsible for undoing one chunk of
+work.  To avoid multiple levels of error handling, this "undo" callback should
+not be allowed to fail.  The iterator used for the original task can simply be
+reused for the undo operation.
-- 
2.15.0
