From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/3] ARM: dts: sun8i: a83t: Add I2S controller device nodes
Date: Thu, 14 Dec 2017 12:23:48 +0800 [thread overview]
Message-ID: <20171214042350.29469-2-wens@csie.org> (raw)
In-Reply-To: <20171214042350.29469-1-wens@csie.org>
The A83T has 3 I2S controllers. The first is multiplexed with the TDM
controller. The pins are generally connected to the codec side of the
AXP81x PMIC/codec/RTC chip. The second is free for other uses. The
third only supports output, and is connected internally to the HDMI
controller for HDMI audio output.
This patch adds device nodes for the controllers, and a default pinmux
setting for the second controller.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 47 +++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index a384b766f3dc..354cb4b48f47 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -348,6 +348,12 @@
drive-strength = <40>;
};
+ i2s1_pins: i2s1-pins {
+ /* I2S1 does not have external MCLK pin */
+ pins = "PG10", "PG11", "PG12", "PG13";
+ function = "i2s1";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -430,6 +436,47 @@
status = "disabled";
};
+ i2s0: i2s@1c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a83t-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ resets = <&ccu RST_BUS_I2S0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s1: i2s@1c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a83t-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 4>, <&dma 4>;
+ resets = <&ccu RST_BUS_I2S1>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_pins>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@1c22800 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a83t-i2s";
+ reg = <0x01c22800 0x400>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 27>;
+ resets = <&ccu RST_BUS_I2S2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
--
2.15.0
next prev parent reply other threads:[~2017-12-14 4:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-14 4:23 [PATCH v2 0/3] ARM: sun8i: a83t: Add support for I2S and I2C Chen-Yu Tsai
2017-12-14 4:23 ` Chen-Yu Tsai [this message]
2017-12-14 4:23 ` [PATCH v2 2/3] ARM: dts: sun8i: a83t: Add I2C device nodes and pinmux settings Chen-Yu Tsai
2017-12-14 4:23 ` [PATCH v2 3/3] [DO NOT MERGE] ARM: dts: sun8i: a83t: bpi-m3: Enable PCM5122 codec with I2S1 Chen-Yu Tsai
2017-12-15 14:43 ` [PATCH v2 0/3] ARM: sun8i: a83t: Add support for I2S and I2C Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171214042350.29469-2-wens@csie.org \
--to=wens@csie.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).