From: Andrey Ryabinin <aryabinin@virtuozzo.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@kernel.org>,
Vladimir Davydov <vdavydov.dev@gmail.com>,
cgroups@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org,
Andrey Ryabinin <aryabinin@virtuozzo.com>
Subject: [PATCH 1/2] mm/memcg: try harder to decrease [memory,memsw].limit_in_bytes
Date: Wed, 20 Dec 2017 13:24:28 +0300 [thread overview]
Message-ID: <20171220102429.31601-1-aryabinin@virtuozzo.com> (raw)
mem_cgroup_resize_[memsw]_limit() tries to free only 32 (SWAP_CLUSTER_MAX)
pages on each iteration. This makes practically impossible to decrease
limit of memory cgroup. Tasks could easily allocate back 32 pages,
so we can't reduce memory usage, and once retry_count reaches zero we return
-EBUSY.
It's easy to reproduce the problem by running the following commands:
mkdir /sys/fs/cgroup/memory/test
echo $$ >> /sys/fs/cgroup/memory/test/tasks
cat big_file > /dev/null &
sleep 1 && echo $((100*1024*1024)) > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
-bash: echo: write error: Device or resource busy
Instead of trying to free small amount of pages, it's much more
reasonable to free 'usage - limit' pages.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
---
mm/memcontrol.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index f40b5ad3f959..09ee052cf684 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2476,7 +2476,7 @@ static int mem_cgroup_resize_limit(struct mem_cgroup *memcg,
retry_count = MEM_CGROUP_RECLAIM_RETRIES *
mem_cgroup_count_children(memcg);
- oldusage = page_counter_read(&memcg->memory);
+ curusage = oldusage = page_counter_read(&memcg->memory);
do {
if (signal_pending(current)) {
@@ -2498,7 +2498,8 @@ static int mem_cgroup_resize_limit(struct mem_cgroup *memcg,
if (!ret)
break;
- try_to_free_mem_cgroup_pages(memcg, 1, GFP_KERNEL, true);
+ try_to_free_mem_cgroup_pages(memcg, curusage - limit,
+ GFP_KERNEL, true);
curusage = page_counter_read(&memcg->memory);
/* Usage is reduced ? */
@@ -2527,7 +2528,7 @@ static int mem_cgroup_resize_memsw_limit(struct mem_cgroup *memcg,
retry_count = MEM_CGROUP_RECLAIM_RETRIES *
mem_cgroup_count_children(memcg);
- oldusage = page_counter_read(&memcg->memsw);
+ curusage = oldusage = page_counter_read(&memcg->memsw);
do {
if (signal_pending(current)) {
@@ -2549,7 +2550,8 @@ static int mem_cgroup_resize_memsw_limit(struct mem_cgroup *memcg,
if (!ret)
break;
- try_to_free_mem_cgroup_pages(memcg, 1, GFP_KERNEL, false);
+ try_to_free_mem_cgroup_pages(memcg, curusage - limit,
+ GFP_KERNEL, false);
curusage = page_counter_read(&memcg->memsw);
/* Usage is reduced ? */
--
2.13.6
next reply other threads:[~2017-12-20 10:21 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 10:24 Andrey Ryabinin [this message]
2017-12-20 10:24 ` [PATCH 2/2] mm/memcg: Consolidate mem_cgroup_resize_[memsw]_limit() functions Andrey Ryabinin
2017-12-20 10:33 ` [PATCH 1/2] mm/memcg: try harder to decrease [memory,memsw].limit_in_bytes Michal Hocko
2017-12-20 11:32 ` Andrey Ryabinin
2017-12-20 11:34 ` Michal Hocko
2017-12-20 18:15 ` Shakeel Butt
2017-12-21 10:00 ` Andrey Ryabinin
2017-12-20 13:21 ` [PATCH v2 " Andrey Ryabinin
2017-12-20 13:21 ` [PATCH v2 2/2] mm/memcg: Consolidate mem_cgroup_resize_[memsw]_limit() functions Andrey Ryabinin
2017-12-20 13:53 ` [PATCH v2 1/2] mm/memcg: try harder to decrease [memory,memsw].limit_in_bytes Michal Hocko
2018-01-09 16:58 ` [PATCH v3 " Andrey Ryabinin
2018-01-09 16:58 ` [PATCH v3 2/2] mm/memcg: Consolidate mem_cgroup_resize_[memsw]_limit() functions Andrey Ryabinin
2018-01-09 17:10 ` Shakeel Butt
2018-01-09 17:26 ` Andrey Ryabinin
2018-01-09 23:26 ` Andrew Morton
2018-01-10 12:43 ` [PATCH v4] mm/memcg: try harder to decrease [memory,memsw].limit_in_bytes Andrey Ryabinin
2018-01-10 22:31 ` Andrew Morton
2018-01-11 11:59 ` Andrey Ryabinin
2018-01-12 0:21 ` Andrew Morton
2018-01-12 9:08 ` Andrey Ryabinin
2018-01-11 10:42 ` Michal Hocko
2018-01-11 12:21 ` Andrey Ryabinin
2018-01-11 12:46 ` Michal Hocko
2018-01-11 15:23 ` Andrey Ryabinin
2018-01-11 16:29 ` Michal Hocko
2018-01-11 21:59 ` Andrey Ryabinin
2018-01-12 12:24 ` Michal Hocko
2018-01-12 22:57 ` Shakeel Butt
2018-01-15 12:29 ` Andrey Ryabinin
2018-01-15 17:04 ` Shakeel Butt
2018-01-15 12:30 ` Andrey Ryabinin
2018-01-15 12:46 ` Michal Hocko
2018-01-15 12:53 ` Andrey Ryabinin
2018-01-15 12:58 ` Michal Hocko
2018-01-09 17:08 ` [PATCH v3 1/2] " Andrey Ryabinin
2018-01-09 17:22 ` Shakeel Butt
2018-01-19 13:25 ` [PATCH v5 1/2] mm/memcontrol.c: " Andrey Ryabinin
2018-01-19 13:25 ` [PATCH v5 2/2] mm/memcontrol.c: Reduce reclaim retries in mem_cgroup_resize_limit() Andrey Ryabinin
2018-01-19 13:35 ` Michal Hocko
2018-01-19 14:49 ` Shakeel Butt
2018-01-19 15:11 ` Michal Hocko
2018-01-19 15:24 ` Shakeel Butt
2018-01-19 15:31 ` Michal Hocko
2018-02-21 20:17 ` Andrew Morton
2018-02-22 13:50 ` Andrey Ryabinin
2018-02-22 14:09 ` Michal Hocko
2018-02-22 15:13 ` Andrey Ryabinin
2018-02-22 15:33 ` Michal Hocko
2018-02-22 15:38 ` Andrey Ryabinin
2018-02-22 15:44 ` Michal Hocko
2018-02-22 16:01 ` Andrey Ryabinin
2018-02-22 16:30 ` Michal Hocko
2018-01-19 13:32 ` [PATCH v5 1/2] mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes Michal Hocko
2018-01-25 19:44 ` Andrey Ryabinin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171220102429.31601-1-aryabinin@virtuozzo.com \
--to=aryabinin@virtuozzo.com \
--cc=akpm@linux-foundation.org \
--cc=cgroups@vger.kernel.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
--cc=vdavydov.dev@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).