From: Paul Cercueil <paul@crapouillou.net>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>,
Paul Burton <paul.burton@mips.com>,
linux-kernel@vger.kernel.org, linux-mips@linux-mips.org
Subject: [PATCH v6 08/15] MIPS: ingenic: Use common cmdline handling code
Date: Fri, 5 Jan 2018 19:25:06 +0100 [thread overview]
Message-ID: <20180105182513.16248-9-paul@crapouillou.net> (raw)
In-Reply-To: <20180105182513.16248-1-paul@crapouillou.net>
From: Paul Burton <paul.burton@mips.com>
jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
arcs_cmdline, up to argc (in fw_arg0). The common code in
fw_init_cmdline will do the exact same thing when run on a system where
fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
use it). Remove the custom implementation & use the generic code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
arch/mips/jz4740/prom.c | 24 ++----------------------
1 file changed, 2 insertions(+), 22 deletions(-)
v2: No change
v3: No change
v4: No change
v5: No change
v6: Update Paul Burton's email address
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index 47e857194ce6..a62dd8e6ecf9 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -20,33 +20,13 @@
#include <linux/serial_reg.h>
#include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
#include <asm/mach-jz4740/base.h>
-static __init void jz4740_init_cmdline(int argc, char *argv[])
-{
- unsigned int count = COMMAND_LINE_SIZE - 1;
- int i;
- char *dst = &(arcs_cmdline[0]);
- char *src;
-
- for (i = 1; i < argc && count; ++i) {
- src = argv[i];
- while (*src && count) {
- *dst++ = *src++;
- --count;
- }
- *dst++ = ' ';
- }
- if (i > 1)
- --dst;
-
- *dst = 0;
-}
-
void __init prom_init(void)
{
- jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
mips_machtype = MACH_INGENIC_JZ4740;
+ fw_init_cmdline();
}
void __init prom_free_prom_memory(void)
--
2.11.0
next prev parent reply other threads:[~2018-01-05 18:27 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 15:08 [PATCH v5 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-05 16:34 ` Rob Herring
2018-01-02 15:08 ` [PATCH v5 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-02 17:05 ` Mathieu Malaterre
2018-01-02 15:08 ` [PATCH v5 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-02 15:58 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-02 15:59 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards Paul Cercueil
2018-01-02 16:02 ` PrasannaKumar Muralidharan
2018-01-02 16:32 ` Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-02 16:09 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2018-01-02 16:45 ` PrasannaKumar Muralidharan
2018-01-05 18:03 ` Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-01-02 17:04 ` Mathieu Malaterre
2018-01-05 18:24 ` [PATCH v6 00/15] JZ4770 SoC support Paul Cercueil
2018-01-05 18:24 ` [PATCH v6 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 00/14] JZ4770 and GCW0 patchset Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 01/14] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 02/14] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 03/14] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 04/14] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 05/14] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 06/14] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 07/14] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 08/14] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 09/14] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 10/14] MIPS: ingenic: Detect machtype from SoC compatible string Paul Cercueil
2018-01-16 22:06 ` James Hogan
2018-01-16 15:48 ` [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-17 21:28 ` James Hogan
2018-01-18 17:14 ` Paul Cercueil
2018-01-18 20:30 ` James Hogan
2018-01-16 15:48 ` [PATCH v7 12/14] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 13/14] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 14/14] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-02-01 15:31 ` [PATCH v7 00/14] JZ4770 and GCW0 patchset James Hogan
2018-01-05 18:25 ` [PATCH v6 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-10 21:37 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-05 18:25 ` Paul Cercueil [this message]
2018-01-10 22:16 ` [PATCH v6 08/15] MIPS: ingenic: Use common cmdline handling code James Hogan
2018-01-05 18:25 ` [PATCH v6 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-10 22:19 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string Paul Cercueil
2018-01-10 22:27 ` James Hogan
2018-01-16 14:06 ` Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-10 22:42 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-10 22:52 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2018-01-10 23:20 ` James Hogan
2018-01-16 14:10 ` Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-01-07 16:18 ` Philippe Ombredanne
2018-01-10 22:59 ` Paul Cercueil
2018-01-23 10:31 ` Philippe Ombredanne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180105182513.16248-9-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=maarten@treewalker.org \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).