From: Yixun Lan <yixun.lan@amlogic.com>
To: Kevin Hilman <khilman@baylibre.com>, <devicetree@vger.kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Carlo Caione <carlo@caione.org>,
Yixun Lan <yixun.lan@amlogic.com>,
<linux-amlogic@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 1/5] ARM64: dts: meson: uart: fix address space range
Date: Sat, 6 Jan 2018 08:10:40 +0800 [thread overview]
Message-ID: <20180106001044.108163-2-yixun.lan@amlogic.com> (raw)
In-Reply-To: <20180106001044.108163-1-yixun.lan@amlogic.com>
The address space range is actually 0x18, fixed here.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 10 +++++-----
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index a80632641b39..70c776ef7aa7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -165,14 +165,14 @@
uart_A: serial@24000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
- reg = <0x0 0x24000 0x0 0x14>;
+ reg = <0x0 0x24000 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_B: serial@23000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
- reg = <0x0 0x23000 0x0 0x14>;
+ reg = <0x0 0x23000 0x0 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6cb3c2a52baf..4ee2e7951482 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -235,14 +235,14 @@
uart_A: serial@84c0 {
compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x84c0 0x0 0x14>;
+ reg = <0x0 0x84c0 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x84dc 0x0 0x14>;
+ reg = <0x0 0x84dc 0x0 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
@@ -287,7 +287,7 @@
uart_C: serial@8700 {
compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x8700 0x0 0x14>;
+ reg = <0x0 0x8700 0x0 0x18>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
@@ -404,14 +404,14 @@
uart_AO: serial@4c0 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
- reg = <0x0 0x004c0 0x0 0x14>;
+ reg = <0x0 0x004c0 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_AO_B: serial@4e0 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
- reg = <0x0 0x004e0 0x0 0x14>;
+ reg = <0x0 0x004e0 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
--
2.15.1
next prev parent reply other threads:[~2018-01-06 0:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-06 0:10 [PATCH v2 0/5] ARM64: dts: meson-axg: UART DT updates Yixun Lan
2018-01-06 0:10 ` Yixun Lan [this message]
2018-01-08 8:54 ` [PATCH v2 1/5] ARM64: dts: meson: uart: fix address space range Jerome Brunet
2018-01-17 0:01 ` Kevin Hilman
2018-01-06 0:10 ` [PATCH v2 2/5] ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART Yixun Lan
2018-01-08 8:56 ` Jerome Brunet
2018-01-06 0:10 ` [PATCH v2 3/5] ARM64: dts: meson-axg: uart: Add the pinctrl info description Yixun Lan
2018-01-07 20:19 ` Martin Blumenstingl
2018-01-08 6:07 ` Yixun Lan
2018-01-08 6:44 ` Yixun Lan
2018-01-08 8:42 ` Jerome Brunet
2018-01-06 0:10 ` [PATCH v2 4/5] ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A Yixun Lan
2018-01-06 0:10 ` [PATCH v2 5/5] ARM64: dts: meson-axg: enable the UART_A controller Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180106001044.108163-2-yixun.lan@amlogic.com \
--to=yixun.lan@amlogic.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).