linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: mst@redhat.com, kvm@vger.kernel.org,
	virtualization@lists.linux-foundation.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: willemb@google.com, Jason Wang <jasowang@redhat.com>
Subject: [PATCH net-next] vhost_net: batch used ring update in rx
Date: Tue,  9 Jan 2018 18:27:45 +0800	[thread overview]
Message-ID: <1515493665-35306-1-git-send-email-jasowang@redhat.com> (raw)

This patch tries to batched used ring update during RX. This is pretty
fit for the case when guest is much faster (e.g dpdk based
backend). In this case, used ring is almost empty:

- we may get serious cache line misses/contending on both used ring
  and used idx.
- at most 1 packet could be dequeued at one time, batching in guest
  does not make much effect.

Update used ring in a batch can help since guest won't access the used
ring until used idx was advanced for several descriptors and since we
advance used ring for every N packets, guest will only need to access
used idx for every N packet since it can cache the used idx. To have a
better interaction for both batch dequeuing and dpdk batching,
VHOST_RX_BATCH was used as the maximum number of descriptors that
could be batched.

Test were done between two machines with 2.40GHz Intel(R) Xeon(R) CPU
E5-2630 connected back to back through ixgbe. Traffic were generated
on one remote ixgbe through MoonGen and measure the RX pps through
testpmd in guest when do xdp_redirect_map from local ixgbe to
tap. RX pps were increased from 3.05 Mpps to 4.00 Mpps (about 31%
improvement).

One possible concern for this is the implications for TCP (especially
latency sensitive workload). Result[1] does not show obvious changes
for most of the netperf test (RR, TX, and RX). And we do get some
improvements for RX on some specific size.

Guest RX:

size/sessions/+thu%/+normalize%
   64/     1/   +2%/   +2%
   64/     2/   +2%/   -1%
   64/     4/   +1%/   +1%
   64/     8/    0%/    0%
  256/     1/   +6%/   -3%
  256/     2/   -3%/   +2%
  256/     4/  +11%/  +11%
  256/     8/    0%/    0%
  512/     1/   +4%/    0%
  512/     2/   +2%/   +2%
  512/     4/    0%/   -1%
  512/     8/   -8%/   -8%
 1024/     1/   -7%/  -17%
 1024/     2/   -8%/   -7%
 1024/     4/   +1%/    0%
 1024/     8/    0%/    0%
 2048/     1/  +30%/  +14%
 2048/     2/  +46%/  +40%
 2048/     4/    0%/    0%
 2048/     8/    0%/    0%
 4096/     1/  +23%/  +22%
 4096/     2/  +26%/  +23%
 4096/     4/    0%/   +1%
 4096/     8/    0%/    0%
16384/     1/   -2%/   -3%
16384/     2/   +1%/   -4%
16384/     4/   -1%/   -3%
16384/     8/    0%/   -1%
65535/     1/  +15%/   +7%
65535/     2/   +4%/   +7%
65535/     4/    0%/   +1%
65535/     8/    0%/    0%

TCP_RR:

size/sessions/+thu%/+normalize%
    1/     1/    0%/   +1%
    1/    25/   +2%/   +1%
    1/    50/   +4%/   +1%
   64/     1/    0%/   -4%
   64/    25/   +2%/   +1%
   64/    50/    0%/   -1%
  256/     1/    0%/    0%
  256/    25/    0%/    0%
  256/    50/   +4%/   +2%

Guest TX:

size/sessions/+thu%/+normalize%
   64/     1/   +4%/   -2%
   64/     2/   -6%/   -5%
   64/     4/   +3%/   +6%
   64/     8/    0%/   +3%
  256/     1/  +15%/  +16%
  256/     2/  +11%/  +12%
  256/     4/   +1%/    0%
  256/     8/   +5%/   +5%
  512/     1/   -1%/   -6%
  512/     2/    0%/   -8%
  512/     4/   -2%/   +4%
  512/     8/   +6%/   +9%
 1024/     1/   +3%/   +1%
 1024/     2/   +3%/   +9%
 1024/     4/    0%/   +7%
 1024/     8/    0%/   +7%
 2048/     1/   +8%/   +2%
 2048/     2/   +3%/   -1%
 2048/     4/   -1%/  +11%
 2048/     8/   +3%/   +9%
 4096/     1/   +8%/   +8%
 4096/     2/    0%/   -7%
 4096/     4/   +4%/   +4%
 4096/     8/   +2%/   +5%
16384/     1/   -3%/   +1%
16384/     2/   -1%/  -12%
16384/     4/   -1%/   +5%
16384/     8/    0%/   +1%
65535/     1/    0%/   -3%
65535/     2/   +5%/  +16%
65535/     4/   +1%/   +2%
65535/     8/   +1%/   -1%

Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/vhost/net.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index c7bdeb6..988af72 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -744,7 +744,7 @@ static void handle_rx(struct vhost_net *net)
 	};
 	size_t total_len = 0;
 	int err, mergeable;
-	s16 headcount;
+	s16 headcount, nheads = 0;
 	size_t vhost_hlen, sock_hlen;
 	size_t vhost_len, sock_len;
 	struct socket *sock;
@@ -772,7 +772,7 @@ static void handle_rx(struct vhost_net *net)
 	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk))) {
 		sock_len += sock_hlen;
 		vhost_len = sock_len + vhost_hlen;
-		headcount = get_rx_bufs(vq, vq->heads, vhost_len,
+		headcount = get_rx_bufs(vq, vq->heads + nheads, vhost_len,
 					&in, vq_log, &log,
 					likely(mergeable) ? UIO_MAXIOV : 1);
 		/* On error, stop handling until the next kick. */
@@ -844,8 +844,12 @@ static void handle_rx(struct vhost_net *net)
 			vhost_discard_vq_desc(vq, headcount);
 			goto out;
 		}
-		vhost_add_used_and_signal_n(&net->dev, vq, vq->heads,
-					    headcount);
+		nheads += headcount;
+		if (nheads > VHOST_RX_BATCH) {
+			vhost_add_used_and_signal_n(&net->dev, vq, vq->heads,
+						    nheads);
+			nheads = 0;
+		}
 		if (unlikely(vq_log))
 			vhost_log_write(vq, vq_log, log, vhost_len);
 		total_len += vhost_len;
@@ -856,6 +860,9 @@ static void handle_rx(struct vhost_net *net)
 	}
 	vhost_net_enable_vq(net, vq);
 out:
+	if (nheads)
+		vhost_add_used_and_signal_n(&net->dev, vq, vq->heads,
+					    nheads);
 	mutex_unlock(&vq->mutex);
 }
 
-- 
1.8.3.1

             reply	other threads:[~2018-01-09 10:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-09 10:27 Jason Wang [this message]
2018-01-09 15:44 ` [PATCH net-next] vhost_net: batch used ring update in rx Michael S. Tsirkin
2018-01-10 20:04 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515493665-35306-1-git-send-email-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=willemb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).