From: Stefan Agner <stefan@agner.ch>
To: gregkh@linuxfoundation.org
Cc: felipe.balbi@linux.intel.com, johan@kernel.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Stefan Agner <stefan@agner.ch>
Subject: [PATCH] usb: misc: usb3503: make sure reset is low for at least 100us
Date: Thu, 11 Jan 2018 14:47:40 +0100 [thread overview]
Message-ID: <20180111134740.3321-1-stefan@agner.ch> (raw)
When using a GPIO which is high by default, and initialize the
driver in USB Hub mode, initialization fails with:
[ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5)
The reason seems to be that the chip is not properly reset.
Probe does initialize reset low, however some lines later the
code already set it back high, which is not long enouth.
Make sure reset is asserted for at least 100us by inserting a
delay after initializing the reset pin during probe.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/usb/misc/usb3503.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 465dbf68b463..f723f7b8c9ac 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -279,6 +279,8 @@ static int usb3503_probe(struct usb3503 *hub)
if (gpio_is_valid(hub->gpio_reset)) {
err = devm_gpio_request_one(dev, hub->gpio_reset,
GPIOF_OUT_INIT_LOW, "usb3503 reset");
+ /* Datasheet defines a hardware reset to be at least 100us */
+ usleep_range(100, 10000);
if (err) {
dev_err(dev,
"unable to request GPIO %d as reset pin (%d)\n",
--
2.15.1
reply other threads:[~2018-01-11 13:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180111134740.3321-1-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=felipe.balbi@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).