linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.vnet.ibm.com>
To: linux-hwmon@vger.kernel.org
Cc: linux@roeck-us.net, linux-kernel@vger.kernel.org,
	jdelvare@suse.com, joel@jms.id.au, eajames@linux.vnet.ibm.com
Subject: [PATCH v3] hwmon (pmbus): cffps: Add led class device for power supply fault led
Date: Thu, 11 Jan 2018 11:20:10 -0600	[thread overview]
Message-ID: <1515691210-24402-1-git-send-email-eajames@linux.vnet.ibm.com> (raw)

This power supply device doesn't correctly manage it's own fault led.
Add an led class device and register it so that userspace can manage
power supply fault led as necessary.

Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
---

 Changes since v2:
 - Use fixed size buffer for led name.

 Changes since v1:
 - move led registration into a separate function.
 - improve comments.

 drivers/hwmon/pmbus/ibm-cffps.c | 96 +++++++++++++++++++++++++++++++++++++----
 1 file changed, 88 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index 2d6f4f4..93d9a9e 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -13,6 +13,7 @@
 #include <linux/fs.h>
 #include <linux/i2c.h>
 #include <linux/jiffies.h>
+#include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/pmbus.h>
@@ -25,6 +26,7 @@
 #define CFFPS_CCIN_CMD				0xBD
 #define CFFPS_FW_CMD_START			0xFA
 #define CFFPS_FW_NUM_BYTES			4
+#define CFFPS_SYS_CONFIG_CMD			0xDA
 
 #define CFFPS_INPUT_HISTORY_CMD			0xD6
 #define CFFPS_INPUT_HISTORY_SIZE		100
@@ -39,6 +41,11 @@
 #define CFFPS_MFR_VAUX_FAULT			BIT(6)
 #define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
 
+#define CFFPS_LED_BLINK				BIT(0)
+#define CFFPS_LED_ON				BIT(1)
+#define CFFPS_LED_OFF				BIT(2)
+#define CFFPS_BLINK_RATE_MS			250
+
 enum {
 	CFFPS_DEBUGFS_INPUT_HISTORY = 0,
 	CFFPS_DEBUGFS_FRU,
@@ -63,6 +70,10 @@ struct ibm_cffps {
 	struct ibm_cffps_input_history input_history;
 
 	int debugfs_entries[CFFPS_DEBUGFS_NUM_ENTRIES];
+
+	char led_name[32];
+	u8 led_state;
+	struct led_classdev led;
 };
 
 #define to_psu(x, y) container_of((x), struct ibm_cffps, debugfs_entries[(y)])
@@ -258,6 +269,69 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
 	return rc;
 }
 
+static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
+					 enum led_brightness brightness)
+{
+	int rc;
+	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+	if (brightness == LED_OFF) {
+		psu->led_state = CFFPS_LED_OFF;
+	} else {
+		brightness = LED_FULL;
+		if (psu->led_state != CFFPS_LED_BLINK)
+			psu->led_state = CFFPS_LED_ON;
+	}
+
+	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+				       psu->led_state);
+	if (rc < 0)
+		return;
+
+	led_cdev->brightness = brightness;
+}
+
+static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
+				   unsigned long *delay_on,
+				   unsigned long *delay_off)
+{
+	int rc;
+	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+	psu->led_state = CFFPS_LED_BLINK;
+
+	if (led_cdev->brightness == LED_OFF)
+		return 0;
+
+	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+				       CFFPS_LED_BLINK);
+	if (rc < 0)
+		return rc;
+
+	*delay_on = CFFPS_BLINK_RATE_MS;
+	*delay_off = CFFPS_BLINK_RATE_MS;
+
+	return 0;
+}
+
+static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
+{
+	int rc;
+	struct i2c_client *client = psu->client;
+	struct device *dev = &client->dev;
+
+	snprintf(psu->led_name, sizeof(psu->led_name), "%s-%02x", client->name,
+		 client->addr);
+	psu->led.name = psu->led_name;
+	psu->led.max_brightness = LED_FULL;
+	psu->led.brightness_set = ibm_cffps_led_brightness_set;
+	psu->led.blink_set = ibm_cffps_led_blink_set;
+
+	rc = devm_led_classdev_register(dev, &psu->led);
+	if (rc)
+		dev_warn(dev, "failed to register led class: %d\n", rc);
+}
+
 static struct pmbus_driver_info ibm_cffps_info = {
 	.pages = 1,
 	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
@@ -286,6 +360,20 @@ static int ibm_cffps_probe(struct i2c_client *client,
 	if (rc)
 		return rc;
 
+	/*
+	 * Don't fail the probe if there isn't enough memory for leds and
+	 * debugfs.
+	 */
+	psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+	if (!psu)
+		return 0;
+
+	psu->client = client;
+	mutex_init(&psu->input_history.update_lock);
+	psu->input_history.last_update = jiffies - HZ;
+
+	ibm_cffps_create_led_class(psu);
+
 	/* Don't fail the probe if we can't create debugfs */
 	debugfs = pmbus_get_debugfs_dir(client);
 	if (!debugfs)
@@ -295,14 +383,6 @@ static int ibm_cffps_probe(struct i2c_client *client,
 	if (!ibm_cffps_dir)
 		return 0;
 
-	psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
-	if (!psu)
-		return 0;
-
-	psu->client = client;
-	mutex_init(&psu->input_history.update_lock);
-	psu->input_history.last_update = jiffies - HZ;
-
 	for (i = 0; i < CFFPS_DEBUGFS_NUM_ENTRIES; ++i)
 		psu->debugfs_entries[i] = i;
 
-- 
1.8.3.1

             reply	other threads:[~2018-01-11 17:20 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-11 17:20 Eddie James [this message]
2018-01-11 17:39 ` [v3] hwmon (pmbus): cffps: Add led class device for power supply fault led Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515691210-24402-1-git-send-email-eajames@linux.vnet.ibm.com \
    --to=eajames@linux.vnet.ibm.com \
    --cc=jdelvare@suse.com \
    --cc=joel@jms.id.au \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).