linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: James Hogan <jhogan@kernel.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH v3 5/8] MIPS: mscc: add ocelot dtsi
Date: Tue, 16 Jan 2018 11:12:37 +0100	[thread overview]
Message-ID: <20180116101240.5393-6-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <20180116101240.5393-1-alexandre.belloni@free-electrons.com>

Add a device tree include file for the Microsemi Ocelot SoC.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/mips/boot/dts/Makefile         |   1 +
 arch/mips/boot/dts/mscc/Makefile    |   4 ++
 arch/mips/boot/dts/mscc/ocelot.dtsi | 110 ++++++++++++++++++++++++++++++++++++
 3 files changed, 115 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/Makefile
 create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi

diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index e2c6f131c8eb..1e79cab8e269 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -4,6 +4,7 @@ subdir-y	+= cavium-octeon
 subdir-y	+= img
 subdir-y	+= ingenic
 subdir-y	+= lantiq
+subdir-y	+= mscc
 subdir-y	+= mti
 subdir-y	+= netlogic
 subdir-y	+= ni
diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
new file mode 100644
index 000000000000..f0a155a74e02
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -0,0 +1,4 @@
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
new file mode 100644
index 000000000000..b2f936e1fbb9
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -0,0 +1,110 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,ocelot";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <250000000>;
+
+		cpu@0 {
+			compatible = "mscc,ocelot";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpuintc: interrupt-controller@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x70000000 0x2000000>;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@0 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x0 0x2c>;
+		};
+
+		intc: interrupt-controller@70 {
+			compatible = "mscc,ocelot-icpu-intr";
+			reg = <0x70 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		uart2: serial@100800 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100800 0x20>;
+			interrupts = <7>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		reset@1070008 {
+			compatible = "mscc,ocelot-chip-reset";
+			reg = <0x1070008 0x4>;
+		};
+
+		gpio: pinctrl@1070034 {
+			compatible = "mscc,ocelot-pinctrl";
+			reg = <0x1070034 0x68>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 22>;
+
+			uart_pins: uart-pins {
+				pins = "GPIO_6", "GPIO_7";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_12", "GPIO_13";
+				function = "uart2";
+			};
+		};
+	};
+};
-- 
2.15.1

  parent reply	other threads:[~2018-01-16 10:13 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-16 10:12 [PATCH v3 0/8] MIPS: add support for the Microsemi MIPS SoCs Alexandre Belloni
2018-01-16 10:12 ` [PATCH v3 1/8] dt-bindings: mips: Add bindings for Microsemi SoCs Alexandre Belloni
2018-01-19 19:23   ` Rob Herring
2018-02-14 16:38   ` James Hogan
2018-01-16 10:12 ` [PATCH v3 2/8] dt-bindings: power: reset: Document ocelot-reset binding Alexandre Belloni
2018-01-20  0:34   ` Rob Herring
2018-02-08 22:32   ` Sebastian Reichel
2018-01-16 10:12 ` [PATCH v3 3/8] power: reset: Add a driver for the Microsemi Ocelot reset Alexandre Belloni
2018-02-08 22:32   ` Sebastian Reichel
2018-01-16 10:12 ` [PATCH v3 4/8] MIPS: mscc: Add initial support for Microsemi MIPS SoCs Alexandre Belloni
2018-02-14 16:51   ` James Hogan
2018-02-14 21:38     ` Philippe Ombredanne
2018-01-16 10:12 ` Alexandre Belloni [this message]
2018-02-14 16:57   ` [PATCH v3 5/8] MIPS: mscc: add ocelot dtsi James Hogan
2018-02-27 15:47     ` Alexandre Belloni
2018-02-27 21:01   ` Jonas Gorski
2018-02-28 13:14     ` Alexandre Belloni
2018-01-16 10:12 ` [PATCH v3 6/8] MIPS: mscc: add ocelot PCB123 device tree Alexandre Belloni
2018-02-14 17:00   ` James Hogan
2018-02-27 15:54     ` Alexandre Belloni
2018-02-27 15:57       ` James Hogan
2018-01-16 10:12 ` [PATCH v3 7/8] MIPS: defconfigs: add a defconfig for Microsemi SoCs Alexandre Belloni
2018-02-14 17:03   ` James Hogan
2018-02-27 16:15     ` Alexandre Belloni
2018-02-27 16:23       ` James Hogan
2018-01-16 10:12 ` [PATCH v3 8/8] MAINTAINERS: Add entry for Microsemi MIPS SoCs Alexandre Belloni
2018-02-14 17:05   ` James Hogan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180116101240.5393-6-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=jhogan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).