From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: James Hogan <jhogan@kernel.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH v3 7/8] MIPS: defconfigs: add a defconfig for Microsemi SoCs
Date: Tue, 16 Jan 2018 11:12:39 +0100 [thread overview]
Message-ID: <20180116101240.5393-8-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <20180116101240.5393-1-alexandre.belloni@free-electrons.com>
Add a defconfg that reaches userspace for Microsemi Ocelot.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/mips/configs/mscc_defconfig | 84 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
create mode 100644 arch/mips/configs/mscc_defconfig
diff --git a/arch/mips/configs/mscc_defconfig b/arch/mips/configs/mscc_defconfig
new file mode 100644
index 000000000000..58cf09b1ae82
--- /dev/null
+++ b/arch/mips/configs/mscc_defconfig
@@ -0,0 +1,84 @@
+CONFIG_MSCC_OCELOT=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_MIPS_ELF_APPENDED_DTB=y
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_SWAP is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_SHMEM is not set
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SWITCHDEV=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_MICROSEMI_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_N_GSM=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_OCELOT_RESET=y
+CONFIG_SENSORS_TMP401=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_OVERLAY_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_CRYPTO_HW is not set
--
2.15.1
next prev parent reply other threads:[~2018-01-16 10:13 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-16 10:12 [PATCH v3 0/8] MIPS: add support for the Microsemi MIPS SoCs Alexandre Belloni
2018-01-16 10:12 ` [PATCH v3 1/8] dt-bindings: mips: Add bindings for Microsemi SoCs Alexandre Belloni
2018-01-19 19:23 ` Rob Herring
2018-02-14 16:38 ` James Hogan
2018-01-16 10:12 ` [PATCH v3 2/8] dt-bindings: power: reset: Document ocelot-reset binding Alexandre Belloni
2018-01-20 0:34 ` Rob Herring
2018-02-08 22:32 ` Sebastian Reichel
2018-01-16 10:12 ` [PATCH v3 3/8] power: reset: Add a driver for the Microsemi Ocelot reset Alexandre Belloni
2018-02-08 22:32 ` Sebastian Reichel
2018-01-16 10:12 ` [PATCH v3 4/8] MIPS: mscc: Add initial support for Microsemi MIPS SoCs Alexandre Belloni
2018-02-14 16:51 ` James Hogan
2018-02-14 21:38 ` Philippe Ombredanne
2018-01-16 10:12 ` [PATCH v3 5/8] MIPS: mscc: add ocelot dtsi Alexandre Belloni
2018-02-14 16:57 ` James Hogan
2018-02-27 15:47 ` Alexandre Belloni
2018-02-27 21:01 ` Jonas Gorski
2018-02-28 13:14 ` Alexandre Belloni
2018-01-16 10:12 ` [PATCH v3 6/8] MIPS: mscc: add ocelot PCB123 device tree Alexandre Belloni
2018-02-14 17:00 ` James Hogan
2018-02-27 15:54 ` Alexandre Belloni
2018-02-27 15:57 ` James Hogan
2018-01-16 10:12 ` Alexandre Belloni [this message]
2018-02-14 17:03 ` [PATCH v3 7/8] MIPS: defconfigs: add a defconfig for Microsemi SoCs James Hogan
2018-02-27 16:15 ` Alexandre Belloni
2018-02-27 16:23 ` James Hogan
2018-01-16 10:12 ` [PATCH v3 8/8] MAINTAINERS: Add entry for Microsemi MIPS SoCs Alexandre Belloni
2018-02-14 17:05 ` James Hogan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180116101240.5393-8-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=jhogan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).