linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Carlo Caione <carlo@caione.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/9] clk: meson: remove unnecessary rounding in the pll clock
Date: Fri, 19 Jan 2018 16:55:23 +0100	[thread overview]
Message-ID: <20180119155529.11532-4-jbrunet@baylibre.com> (raw)
In-Reply-To: <20180119155529.11532-1-jbrunet@baylibre.com>

The pll driver performs the rate calculation in Mhz, which adds an
unnecessary rounding down to the Mhz of the rate. Use 64bits long
integers to perform this calculation safely on meson8b and perform the
calculation in Hz instead

Fixes: 7a29a869434e ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/clk-pll.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 2614341fc4ad..087dfc532ba8 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -34,6 +34,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
@@ -51,8 +52,7 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
 {
 	struct meson_clk_pll *pll = to_meson_clk_pll(hw);
 	struct parm *p;
-	unsigned long parent_rate_mhz = parent_rate / 1000000;
-	unsigned long rate_mhz;
+	u64 rate;
 	u16 n, m, frac = 0, od, od2 = 0;
 	u32 reg;
 
@@ -74,17 +74,18 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
 		od2 = PARM_GET(p->width, p->shift, reg);
 	}
 
+	rate = (u64)parent_rate * m;
+
 	p = &pll->frac;
 	if (p->width) {
 		reg = readl(pll->base + p->reg_off);
 		frac = PARM_GET(p->width, p->shift, reg);
-		rate_mhz = (parent_rate_mhz * m + \
-				(parent_rate_mhz * frac >> 12)) * 2 / n;
-		rate_mhz = rate_mhz >> od >> od2;
-	} else
-		rate_mhz = (parent_rate_mhz * m / n) >> od >> od2;
 
-	return rate_mhz * 1000000;
+		rate += mul_u64_u32_shr(parent_rate, frac, 12);
+		rate *= 2;
+	}
+
+	return div_u64(rate, n) >> od >> od2;
 }
 
 static long meson_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-- 
2.14.3

  parent reply	other threads:[~2018-01-19 15:57 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-19 15:55 [PATCH v2 0/9] clk: meson: pll fixes Jerome Brunet
2018-01-19 15:55 ` [PATCH v2 1/9] clk: meson: check pll rate param table before using it Jerome Brunet
2018-01-19 15:55 ` [PATCH v2 2/9] clk: meson: remove useless pll rate params tables Jerome Brunet
2018-01-19 15:55 ` Jerome Brunet [this message]
2018-01-19 15:55 ` [PATCH v2 4/9] clk: meson: use the frac parameter width instead of a constant Jerome Brunet
2018-01-19 15:55 ` [PATCH v2 5/9] clk: meson: add od3 to the pll driver Jerome Brunet
2018-01-19 15:55 ` [PATCH v2 6/9] clk: meson: add the gxl hdmi pll Jerome Brunet
2018-01-19 15:55 ` [PATCH v2 7/9] clk: meson: fix rate calculation of plls with a fractional part Jerome Brunet
2018-01-19 15:55 ` [PATCH v2 8/9] clk: meson: gxbb: add the fractional part of the fixed_pll Jerome Brunet
2018-01-19 15:55 ` [PATCH v2 9/9] clk: meson: axg: " Jerome Brunet
2018-01-30 19:10 ` [PATCH v2 0/9] clk: meson: pll fixes Jerome Brunet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180119155529.11532-4-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=carlo@caione.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).