From: Icenowy Zheng <icenowy@aosc.io>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
Russell King <linux@armlinux.org.uk>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Marc Zyngier <marc.zyngier@arm.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
Icenowy Zheng <icenowy@aosc.io>
Subject: [RFC PATCH 8/9] ARM: dts: suniv: add initial DTSI file for suniv and F1C100s
Date: Sat, 20 Jan 2018 07:17:34 +0800 [thread overview]
Message-ID: <20180119231735.61504-9-icenowy@aosc.io> (raw)
In-Reply-To: <20180119231735.61504-1-icenowy@aosc.io>
As we have the support for suniv pin controller and CCU now, add a
initial DTSI for it.
F1C100s is one product with the suniv die, which has a 32MiB co-packaged
DDR1 DRAM chip. As there's nothing special for it, add a dummy DTSI file
for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/suniv-f1c100s.dtsi | 6 ++
arch/arm/boot/dts/suniv.dtsi | 157 +++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+)
create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi
create mode 100644 arch/arm/boot/dts/suniv.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..b877e0bf1823 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -972,6 +972,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+ suniv-f1c100s-licheepi-nano.dtb
dtb-$(CONFIG_ARCH_TANGO) += \
tango4-vantage-1172.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
new file mode 100644
index 000000000000..f084bc8dd19b
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include "suniv.dtsi"
diff --git a/arch/arm/boot/dts/suniv.dtsi b/arch/arm/boot/dts/suniv.dtsi
new file mode 100644
index 000000000000..af1903237514
--- /dev/null
+++ b/arch/arm/boot/dts/suniv.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include <dt-bindings/clock/suniv-ccu.h>
+#include <dt-bindings/reset/suniv-ccu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: clk-24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: clk-32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ fake100M: clk-100M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "fake-100M";
+ };
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram-controller@1c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_d: sram@10000 {
+ compatible = "mmio-sram";
+ reg = <0x00010000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00010000 0x1000>;
+
+ otg_sram: sram-section@0 {
+ compatible = "allwinner,sun4i-a10-sram-d";
+ reg = <0x0000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ccu: clock@1c20000 {
+ compatible = "allwinner,suniv-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ intc: interrupt-controller@1c20400 {
+ compatible = "allwinner,suniv-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pio: pinctrl@1c20800 {
+ compatible = "allwinner,suniv-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <38>, <39>, <40>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ uart0_pins_a: uart-pins-pe {
+ pins = "PE0", "PE1";
+ function = "uart0";
+ };
+ };
+
+ timer@1c20c00 {
+ compatible = "allwinner,suniv-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <13>;
+ clocks = <&osc24M>;
+ };
+
+ wdt: watchdog@1c20ca0 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ };
+
+ uart0: serial@1c25000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25000 0x400>;
+ interrupts = <1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@1c25400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25400 0x400>;
+ interrupts = <2>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial@1c25800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25800 0x400>;
+ interrupts = <3>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+ };
+};
--
2.14.2
next prev parent reply other threads:[~2018-01-19 23:19 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-19 23:17 [RFC PATCH 0/9] initial support for "suniv" Allwinner new ARM9 SoC Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 1/9] ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7 Allwinner SoCs Icenowy Zheng
2018-01-20 3:04 ` [linux-sunxi] " Julian Calaby
2018-01-19 23:17 ` [RFC PATCH 2/9] ARM: sunxi: add Allwinner ARMv5 SoCs Icenowy Zheng
2018-01-20 3:06 ` [linux-sunxi] " Julian Calaby
2018-01-20 3:10 ` Icenowy Zheng
2018-01-20 3:22 ` Julian Calaby
2018-01-22 12:15 ` Maxime Ripard
2018-01-19 23:17 ` [RFC PATCH 3/9] irqchip/sun4i: add support for suniv interrupt controller Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 4/9] clocksource: sun4i: add a compatible for suniv Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 5/9] clocksource/drivers/sun4i: register as sched_clock on suniv Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 6/9] pinctrl: sunxi: add support for suniv (newer F-series SoCs) Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 7/9] clk: sunxi-ng: add support for suniv SoC Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng [this message]
2018-01-21 11:03 ` [RFC PATCH 8/9] ARM: dts: suniv: add initial DTSI file for suniv and F1C100s Rask Ingemann Lambertsen
2018-01-19 23:17 ` [RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano Icenowy Zheng
2018-01-22 12:14 ` [RFC PATCH 0/9] initial support for "suniv" Allwinner new ARM9 SoC Maxime Ripard
2018-01-24 13:10 ` Icenowy Zheng
2018-01-25 15:35 ` Maxime Ripard
2018-01-25 15:38 ` Icenowy Zheng
2018-01-26 14:43 ` Maxime Ripard
2018-01-26 20:57 ` Icenowy Zheng
2018-01-29 19:48 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180119231735.61504-9-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).