From: David Lechner <david@lechnology.com>
To: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Sekhar Nori <nsekhar@ti.com>,
Kevin Hilman <khilman@kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Adam Ford <aford173@gmail.com>,
linux-kernel@vger.kernel.org,
David Lechner <david@lechnology.com>
Subject: [PATCH v6 33/41] ARM: dm355: Remove legacy clock init
Date: Sat, 20 Jan 2018 11:14:12 -0600 [thread overview]
Message-ID: <1516468460-4908-34-git-send-email-david@lechnology.com> (raw)
In-Reply-To: <1516468460-4908-1-git-send-email-david@lechnology.com>
This removes the unused legacy clock init code from
arch/arm/mach-davinci/dm355.c.
Signed-off-by: David Lechner <david@lechnology.com>
---
v6 changes:
- none
arch/arm/mach-davinci/dm355.c | 357 +-----------------------------------------
1 file changed, 1 insertion(+), 356 deletions(-)
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 2c19739..815f7b0 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -35,11 +35,6 @@
#include "davinci.h"
#include "mux.h"
-#ifndef CONFIG_COMMON_CLK
-#include "clock.h"
-#include "psc.h"
-#endif
-
#define DM355_UART2_BASE (IO_PHYS + 0x206000)
#define DM355_OSD_BASE (IO_PHYS + 0x70200)
#define DM355_VENC_BASE (IO_PHYS + 0x70400)
@@ -49,349 +44,6 @@
*/
#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
-#ifndef CONFIG_COMMON_CLK
-static struct pll_data pll1_data = {
- .num = 1,
- .phys_base = DAVINCI_PLL1_BASE,
- .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
-};
-
-static struct pll_data pll2_data = {
- .num = 2,
- .phys_base = DAVINCI_PLL2_BASE,
- .flags = PLL_HAS_PREDIV,
-};
-
-static struct clk ref_clk = {
- .name = "ref_clk",
- /* FIXME -- crystal rate is board-specific */
- .rate = DM355_REF_FREQ,
-};
-
-static struct clk pll1_clk = {
- .name = "pll1",
- .parent = &ref_clk,
- .flags = CLK_PLL,
- .pll_data = &pll1_data,
-};
-
-static struct clk pll1_aux_clk = {
- .name = "pll1_aux_clk",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
- .name = "pll1_sysclk1",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
- .name = "pll1_sysclk2",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
- .name = "pll1_sysclk3",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclkbp = {
- .name = "pll1_sysclkbp",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV
-};
-
-static struct clk vpss_dac_clk = {
- .name = "vpss_dac",
- .parent = &pll1_sysclk3,
- .lpsc = DM355_LPSC_VPSS_DAC,
-};
-
-static struct clk vpss_master_clk = {
- .name = "vpss_master",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_VPSSMSTR,
- .flags = CLK_PSC,
-};
-
-static struct clk vpss_slave_clk = {
- .name = "vpss_slave",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_VPSSSLV,
-};
-
-static struct clk clkout1_clk = {
- .name = "clkout1",
- .parent = &pll1_aux_clk,
- /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */
-};
-
-static struct clk clkout2_clk = {
- .name = "clkout2",
- .parent = &pll1_sysclkbp,
-};
-
-static struct clk pll2_clk = {
- .name = "pll2",
- .parent = &ref_clk,
- .flags = CLK_PLL,
- .pll_data = &pll2_data,
-};
-
-static struct clk pll2_sysclk1 = {
- .name = "pll2_sysclk1",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll2_sysclkbp = {
- .name = "pll2_sysclkbp",
- .parent = &pll2_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV
-};
-
-static struct clk clkout3_clk = {
- .name = "clkout3",
- .parent = &pll2_sysclkbp,
- /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
-};
-
-static struct clk arm_clk = {
- .name = "arm_clk",
- .parent = &pll1_sysclk1,
- .lpsc = DAVINCI_LPSC_ARM,
- .flags = ALWAYS_ENABLED,
-};
-
-/*
- * NOT LISTED below, and not touched by Linux
- * - in SyncReset state by default
- * .lpsc = DAVINCI_LPSC_TPCC,
- * .lpsc = DAVINCI_LPSC_TPTC0,
- * .lpsc = DAVINCI_LPSC_TPTC1,
- * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
- * .lpsc = DAVINCI_LPSC_MEMSTICK,
- * - in Enabled state by default
- * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
- * .lpsc = DAVINCI_LPSC_SCR2, // "bus"
- * .lpsc = DAVINCI_LPSC_SCR3, // "bus"
- * .lpsc = DAVINCI_LPSC_SCR4, // "bus"
- * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation"
- * .lpsc = DAVINCI_LPSC_CFG27, // "test"
- * .lpsc = DAVINCI_LPSC_CFG3, // "test"
- * .lpsc = DAVINCI_LPSC_CFG5, // "test"
- */
-
-static struct clk mjcp_clk = {
- .name = "mjcp",
- .parent = &pll1_sysclk1,
- .lpsc = DAVINCI_LPSC_IMCOP,
-};
-
-static struct clk uart0_clk = {
- .name = "uart0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
- .name = "uart1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_UART1,
-};
-
-static struct clk uart2_clk = {
- .name = "uart2",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_UART2,
-};
-
-static struct clk i2c_clk = {
- .name = "i2c",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_I2C,
-};
-
-static struct clk asp0_clk = {
- .name = "asp0",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_McBSP,
-};
-
-static struct clk asp1_clk = {
- .name = "asp1",
- .parent = &pll1_sysclk2,
- .lpsc = DM355_LPSC_McBSP1,
-};
-
-static struct clk mmcsd0_clk = {
- .name = "mmcsd0",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_MMC_SD,
-};
-
-static struct clk mmcsd1_clk = {
- .name = "mmcsd1",
- .parent = &pll1_sysclk2,
- .lpsc = DM355_LPSC_MMC_SD1,
-};
-
-static struct clk spi0_clk = {
- .name = "spi0",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_SPI,
-};
-
-static struct clk spi1_clk = {
- .name = "spi1",
- .parent = &pll1_sysclk2,
- .lpsc = DM355_LPSC_SPI1,
-};
-
-static struct clk spi2_clk = {
- .name = "spi2",
- .parent = &pll1_sysclk2,
- .lpsc = DM355_LPSC_SPI2,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_GPIO,
-};
-
-static struct clk aemif_clk = {
- .name = "aemif",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_AEMIF,
-};
-
-static struct clk pwm0_clk = {
- .name = "pwm0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM0,
-};
-
-static struct clk pwm1_clk = {
- .name = "pwm1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM1,
-};
-
-static struct clk pwm2_clk = {
- .name = "pwm2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_PWM2,
-};
-
-static struct clk pwm3_clk = {
- .name = "pwm3",
- .parent = &pll1_aux_clk,
- .lpsc = DM355_LPSC_PWM3,
-};
-
-static struct clk timer0_clk = {
- .name = "timer0",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
- .name = "timer1",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
- .name = "timer2",
- .parent = &pll1_aux_clk,
- .lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why can't this be disabled? */
-};
-
-static struct clk timer3_clk = {
- .name = "timer3",
- .parent = &pll1_aux_clk,
- .lpsc = DM355_LPSC_TIMER3,
-};
-
-static struct clk rto_clk = {
- .name = "rto",
- .parent = &pll1_aux_clk,
- .lpsc = DM355_LPSC_RTO,
-};
-
-static struct clk usb_clk = {
- .name = "usb",
- .parent = &pll1_sysclk2,
- .lpsc = DAVINCI_LPSC_USB,
-};
-
-static struct clk_lookup dm355_clks[] = {
- CLK(NULL, "ref", &ref_clk),
- CLK(NULL, "pll1", &pll1_clk),
- CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
- CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
- CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
- CLK(NULL, "pll1_aux", &pll1_aux_clk),
- CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
- CLK(NULL, "vpss_dac", &vpss_dac_clk),
- CLK("vpss", "master", &vpss_master_clk),
- CLK("vpss", "slave", &vpss_slave_clk),
- CLK(NULL, "clkout1", &clkout1_clk),
- CLK(NULL, "clkout2", &clkout2_clk),
- CLK(NULL, "pll2", &pll2_clk),
- CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
- CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
- CLK(NULL, "clkout3", &clkout3_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "mjcp", &mjcp_clk),
- CLK("serial8250.0", NULL, &uart0_clk),
- CLK("serial8250.1", NULL, &uart1_clk),
- CLK("serial8250.2", NULL, &uart2_clk),
- CLK("i2c_davinci.1", NULL, &i2c_clk),
- CLK("davinci-mcbsp.0", NULL, &asp0_clk),
- CLK("davinci-mcbsp.1", NULL, &asp1_clk),
- CLK("dm6441-mmc.0", NULL, &mmcsd0_clk),
- CLK("dm6441-mmc.1", NULL, &mmcsd1_clk),
- CLK("spi_davinci.0", NULL, &spi0_clk),
- CLK("spi_davinci.1", NULL, &spi1_clk),
- CLK("spi_davinci.2", NULL, &spi2_clk),
- CLK(NULL, "gpio", &gpio_clk),
- CLK(NULL, "aemif", &aemif_clk),
- CLK(NULL, "pwm0", &pwm0_clk),
- CLK(NULL, "pwm1", &pwm1_clk),
- CLK(NULL, "pwm2", &pwm2_clk),
- CLK(NULL, "pwm3", &pwm3_clk),
- CLK(NULL, "timer0", &timer0_clk),
- CLK(NULL, "timer1", &timer1_clk),
- CLK("davinci-wdt", NULL, &timer2_clk),
- CLK(NULL, "timer3", &timer3_clk),
- CLK(NULL, "rto", &rto_clk),
- CLK(NULL, "usb", &usb_clk),
- CLK(NULL, NULL, NULL),
-};
-#endif
-/*----------------------------------------------------------------------*/
-
static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
static struct resource dm355_spi0_resources[] = {
@@ -933,8 +585,6 @@ static struct davinci_id dm355_ids[] = {
},
};
-static u32 dm355_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
/*
* T0_BOT: Timer 0, bottom: clockevent source for hrtimers
* T0_TOP: Timer 0, top : clocksource for generic timekeeping
@@ -1019,8 +669,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = {
.jtag_id_reg = 0x01c40028,
.ids = dm355_ids,
.ids_num = ARRAY_SIZE(dm355_ids),
- .psc_bases = dm355_psc_bases,
- .psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
.pinmux_pins = dm355_pins,
.pinmux_pins_num = ARRAY_SIZE(dm355_pins),
@@ -1053,7 +701,6 @@ void __init dm355_init(void)
void __init dm355_init_time(void)
{
-#ifdef CONFIG_COMMON_CLK
void __iomem *pll1, *pll2, *psc;
pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_4K);
@@ -1071,9 +718,7 @@ void __init dm355_init_time(void)
clk_register_fixed_factor(NULL, "clkout2", "pll1_sysclkbp", 0, 1, 1);
/* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
clk_register_fixed_factor(NULL, "clkout3", "pll2_sysclkbp", 0, 1, 1);
-#else
- davinci_clk_init(dm355_clks);
-#endif
+
davinci_timer_init();
}
--
2.7.4
next prev parent reply other threads:[~2018-01-20 17:36 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-20 17:13 [PATCH v6 00/41] ARM: davinci: convert to common clock framework David Lechner
2018-01-20 17:13 ` [PATCH v6 01/41] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks David Lechner
2018-01-29 19:53 ` Rob Herring
2018-01-29 21:14 ` David Lechner
2018-01-30 14:50 ` Rob Herring
2018-01-30 18:46 ` David Lechner
2018-01-31 4:58 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 02/41] clk: davinci: New driver for davinci " David Lechner
2018-02-01 8:01 ` Sekhar Nori
2018-02-01 12:22 ` Sekhar Nori
2018-02-01 18:57 ` David Lechner
2018-02-02 8:12 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 03/41] clk: davinci: Add platform information for TI DA830 PLL David Lechner
2018-02-01 8:10 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 04/41] clk: davinci: Add platform information for TI DA850 PLL David Lechner
2018-02-01 8:58 ` Sekhar Nori
2018-02-01 19:04 ` David Lechner
2018-02-02 8:23 ` Sekhar Nori
2018-02-01 19:22 ` David Lechner
2018-02-02 8:37 ` Sekhar Nori
2018-02-02 17:45 ` David Lechner
2018-01-20 17:13 ` [PATCH v6 05/41] clk: davinci: Add platform information for TI DM355 PLL David Lechner
2018-02-01 9:17 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 06/41] clk: davinci: Add platform information for TI DM365 PLL David Lechner
2018-02-01 9:28 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 07/41] clk: davinci: Add platform information for TI DM644x PLL David Lechner
2018-01-20 17:13 ` [PATCH v6 08/41] clk: davinci: Add platform information for TI DM646x PLL David Lechner
2018-01-20 17:13 ` [PATCH v6 09/41] dt-bindings: clock: New bindings for TI Davinci PSC David Lechner
2018-01-22 15:05 ` Rob Herring
2018-01-20 17:13 ` [PATCH v6 10/41] clk: davinci: New driver for davinci PSC clocks David Lechner
2018-02-01 9:55 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 11/41] clk: davinci: Add platform information for TI DA830 PSC David Lechner
2018-02-01 11:34 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 12/41] clk: davinci: Add platform information for TI DA850 PSC David Lechner
2018-02-01 11:42 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 13/41] clk: davinci: Add platform information for TI DM355 PSC David Lechner
2018-02-01 11:50 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 14/41] clk: davinci: Add platform information for TI DM365 PSC David Lechner
2018-02-01 11:55 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 15/41] clk: davinci: Add platform information for TI DM644x PSC David Lechner
2018-02-01 12:13 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 16/41] clk: davinci: Add platform information for TI DM646x PSC David Lechner
2018-02-01 12:17 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 17/41] dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks David Lechner
2018-01-29 19:59 ` Rob Herring
2018-02-02 6:20 ` Sekhar Nori
2018-02-02 17:50 ` David Lechner
2018-02-05 9:42 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 18/41] clk: davinci: New driver for TI " David Lechner
2018-02-02 13:19 ` Sekhar Nori
2018-02-02 13:53 ` Sekhar Nori
2018-02-02 17:56 ` David Lechner
2018-01-20 17:13 ` [PATCH v6 19/41] clk: davinci: New driver for TI DA8XX USB PHY clocks David Lechner
2018-02-02 13:59 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 20/41] ARM: da830: add new clock init using common clock framework David Lechner
2018-01-22 17:15 ` David Lechner
2018-02-02 14:12 ` Sekhar Nori
2018-02-02 18:03 ` David Lechner
2018-02-05 11:06 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 21/41] ARM: da850: " David Lechner
2018-02-02 14:20 ` Sekhar Nori
2018-02-02 18:05 ` David Lechner
2018-01-20 17:14 ` [PATCH v6 22/41] ARM: dm355: " David Lechner
2018-02-02 14:36 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 23/41] ARM: dm365: " David Lechner
2018-02-02 14:37 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 24/41] ARM: dm644x: " David Lechner
2018-02-02 14:39 ` Sekhar Nori
2018-02-02 18:06 ` David Lechner
2018-02-05 6:01 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 25/41] ARM: dm646x: " David Lechner
2018-02-02 14:55 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 26/41] ARM: da8xx: add new USB PHY " David Lechner
2018-01-22 17:17 ` David Lechner
2018-01-20 17:14 ` [PATCH v6 27/41] ARM: da8xx: add new sata_refclk " David Lechner
2018-02-02 14:59 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 28/41] ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS David Lechner
2018-02-02 15:03 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 29/41] ARM: davinci_all_defconfig: " David Lechner
2018-02-02 15:04 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 30/41] ARM: davinci: switch to common clock framework David Lechner
2018-02-07 13:20 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 31/41] ARM: da830: Remove legacy clock init David Lechner
2018-02-07 13:28 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 32/41] ARM: da850: " David Lechner
2018-02-07 13:35 ` Sekhar Nori
2018-01-20 17:14 ` David Lechner [this message]
2018-02-07 13:42 ` [PATCH v6 33/41] ARM: dm355: " Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 34/41] ARM: dm365: " David Lechner
2018-02-07 13:44 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 35/41] ARM: dm644x: " David Lechner
2018-02-07 13:46 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 36/41] ARM: dm646x: " David Lechner
2018-02-07 15:06 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 37/41] ARM: da8xx: " David Lechner
2018-02-07 15:16 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 38/41] ARM: davinci: remove legacy clocks David Lechner
2018-02-07 15:24 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 39/41] ARM: davinci: add device tree support to timer David Lechner
2018-01-20 17:14 ` [PATCH v6 40/41] ARM: da8xx-dt: switch to device tree clocks David Lechner
2018-01-24 3:26 ` David Lechner
2018-02-05 14:04 ` Bartosz Golaszewski
2018-02-05 15:33 ` Bartosz Golaszewski
2018-01-20 17:14 ` [PATCH v6 41/41] ARM: dts: da850: Add clocks David Lechner
2018-01-22 17:14 ` David Lechner
2018-01-24 4:08 ` David Lechner
2018-02-09 12:46 ` Sekhar Nori
2018-01-21 21:19 ` [PATCH v6 00/41] ARM: davinci: convert to common clock framework Adam Ford
2018-01-22 11:14 ` Bartosz Golaszewski
2018-01-22 17:30 ` David Lechner
2018-01-23 14:54 ` Bartosz Golaszewski
2018-01-23 16:03 ` David Lechner
2018-01-23 16:06 ` David Lechner
2018-01-23 17:03 ` Adam Ford
2018-01-23 18:10 ` Bartosz Golaszewski
2018-01-23 18:26 ` David Lechner
2018-01-23 18:34 ` Bartosz Golaszewski
2018-01-23 19:24 ` David Lechner
2018-01-23 19:53 ` Bartosz Golaszewski
2018-01-23 20:01 ` David Lechner
2018-01-23 20:05 ` David Lechner
2018-01-23 20:23 ` David Lechner
2018-01-24 8:03 ` Bartosz Golaszewski
2018-01-25 12:53 ` Sekhar Nori
2018-01-25 13:34 ` Bartosz Golaszewski
2018-01-25 16:18 ` David Lechner
2018-01-25 17:05 ` Sekhar Nori
2018-01-23 17:04 ` Bartosz Golaszewski
2018-01-22 13:29 ` Bartosz Golaszewski
2018-01-22 17:11 ` David Lechner
2018-01-23 14:56 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516468460-4908-34-git-send-email-david@lechnology.com \
--to=david@lechnology.com \
--cc=aford173@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).