linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <harinikatakamlinux.com@xilinx.com>
To: <nicolas.ferre@atmel.com>, <davem@davemloft.net>,
	<harinikatakamlinux@gmail.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<harinik@xilinx.com>, <michals@xilinx.com>,
	Harini Katakam <harini.katakam@xilinx.com>,
	Michal Simek <michal.simek@xilinx.com>
Subject: [PATCH v2] net: macb: Handle HRESP error
Date: Sat, 27 Jan 2018 11:54:42 +0530	[thread overview]
Message-ID: <1517034282-13992-1-git-send-email-harinikatakamlinux.com> (raw)

From: Harini Katakam <harini.katakam@xilinx.com>

Handle HRESP error by doing a SW reset of RX and TX and
re-initializing the descriptors, RX and TX queue pointers.

Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
v2:
Rebased on top of latest net-next and reinitialized
all rx queues.

 drivers/net/ethernet/cadence/macb.h      |  3 ++
 drivers/net/ethernet/cadence/macb_main.c | 59 +++++++++++++++++++++++++++++---
 2 files changed, 58 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index c50c5ec..8665982 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -13,6 +13,7 @@
 #include <linux/phy.h>
 #include <linux/ptp_clock_kernel.h>
 #include <linux/net_tstamp.h>
+#include <linux/interrupt.h>

 #if defined(CONFIG_ARCH_DMA_ADDR_T_64BIT) || defined(CONFIG_MACB_USE_HWSTAMP)
 #define MACB_EXT_DESC
@@ -1200,6 +1201,8 @@ struct macb {
        struct ethtool_rx_fs_list rx_fs_list;
        spinlock_t rx_fs_lock;
        unsigned int max_tuples;
+
+       struct tasklet_struct   hresp_err_tasklet;
 };

 #ifdef CONFIG_MACB_USE_HWSTAMP
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 234667e..e84afcf 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -1258,6 +1258,57 @@ static int macb_poll(struct napi_struct *napi, int budget)
        return work_done;
 }

+static void macb_hresp_error_task(unsigned long data)
+{
+       struct macb *bp = (struct macb *)data;
+       struct net_device *dev = bp->dev;
+       struct macb_queue *queue = bp->queues;
+       unsigned int q;
+       u32 ctrl;
+
+       for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) {
+               queue_writel(queue, IDR, MACB_RX_INT_FLAGS |
+                                        MACB_TX_INT_FLAGS |
+                                        MACB_BIT(HRESP));
+       }
+       ctrl = macb_readl(bp, NCR);
+       ctrl &= ~(MACB_BIT(RE) | MACB_BIT(TE));
+       macb_writel(bp, NCR, ctrl);
+
+       netif_tx_stop_all_queues(dev);
+       netif_carrier_off(dev);
+
+       bp->macbgem_ops.mog_init_rings(bp);
+
+       /* Initialize TX and RX buffers */
+       for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) {
+               queue_writel(queue, RBQP, lower_32_bits(queue->rx_ring_dma));
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+               if (bp->hw_dma_cap & HW_DMA_CAP_64B)
+                       queue_writel(queue, RBQPH,
+                                    upper_32_bits(queue->rx_ring_dma));
+#endif
+               queue_writel(queue, TBQP, lower_32_bits(queue->tx_ring_dma));
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+               if (bp->hw_dma_cap & HW_DMA_CAP_64B)
+                       queue_writel(queue, TBQPH,
+                                    upper_32_bits(queue->tx_ring_dma));
+#endif
+
+               /* Enable interrupts */
+               queue_writel(queue, IER,
+                            MACB_RX_INT_FLAGS |
+                            MACB_TX_INT_FLAGS |
+                            MACB_BIT(HRESP));
+       }
+
+       ctrl |= MACB_BIT(RE) | MACB_BIT(TE);
+       macb_writel(bp, NCR, ctrl);
+
+       netif_carrier_on(dev);
+       netif_tx_start_all_queues(dev);
+}
+
 static irqreturn_t macb_interrupt(int irq, void *dev_id)
 {
        struct macb_queue *queue = dev_id;
@@ -1347,10 +1398,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
                }

                if (status & MACB_BIT(HRESP)) {
-                       /* TODO: Reset the hardware, and maybe move the
-                        * netdev_err to a lower-priority context as well
-                        * (work queue?)
-                        */
+                       tasklet_schedule(&bp->hresp_err_tasklet);
                        netdev_err(dev, "DMA bus error: HRESP not OK\n");

                        if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
@@ -3937,6 +3985,9 @@ static int macb_probe(struct platform_device *pdev)
                goto err_out_unregister_mdio;
        }

+       tasklet_init(&bp->hresp_err_tasklet, macb_hresp_error_task,
+                    (unsigned long)bp);
+
        phy_attached_info(phydev);

        netdev_info(dev, "Cadence %s rev 0x%08x at 0x%08lx irq %d (%pM)\n",
--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

             reply	other threads:[~2018-01-27  6:33 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-27  6:24 harinikatakamlinux.com [this message]
  -- strict thread matches above, loose matches on Subject: below --
2018-01-27  6:26 [PATCH v2] net: macb: Handle HRESP error harinikatakamlinux
2018-01-27  6:25 harinikatakamlinux
2018-01-26 10:42 Harini Katakam
2018-01-26 15:55 ` David Miller
2018-01-27  5:03   ` Harini Katakam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1517034282-13992-1-git-send-email-harinikatakamlinux.com \
    --to=harinikatakamlinux.com@xilinx.com \
    --cc=davem@davemloft.net \
    --cc=harini.katakam@xilinx.com \
    --cc=harinik@xilinx.com \
    --cc=harinikatakamlinux@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=michals@xilinx.com \
    --cc=netdev@vger.kernel.org \
    --cc=nicolas.ferre@atmel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).