From: Viresh Kumar <viresh.kumar@linaro.org>
To: Rafael Wysocki <rjw@rjwysocki.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>,
linux-pm@vger.kernel.org,
Vincent Guittot <vincent.guittot@linaro.org>,
Eduardo Valentin <edubezval@gmail.com>,
Zhang Rui <rui.zhang@intel.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
daniel.lezcano@linaro.org, linux-samsung-soc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 01/10] ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
Date: Fri, 9 Feb 2018 14:28:01 +0530 [thread overview]
Message-ID: <f808613a9c7a4f23d3a0c64b6f3d4df1b905b16b.1518166039.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1518166039.git.viresh.kumar@linaro.org>
In-Reply-To: <cover.1518166039.git.viresh.kumar@linaro.org>
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.
Remove the unused properties from the CPU nodes.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/exynos4210.dtsi | 2 --
arch/arm/boot/dts/exynos4412.dtsi | 2 --
arch/arm/boot/dts/exynos5250.dtsi | 2 --
arch/arm/boot/dts/exynos5420-cpus.dtsi | 16 ----------------
arch/arm/boot/dts/exynos5422-cpus.dtsi | 16 ----------------
5 files changed, 38 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index cc978cf28267..58ab34a233da 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -49,8 +49,6 @@
400000 975000
200000 950000
>;
- cooling-min-level = <4>;
- cooling-max-level = <2>;
#cooling-cells = <2>; /* min followed by max */
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e4ad2fc0329e..5f5cc12f2075 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -42,8 +42,6 @@
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
- cooling-min-level = <13>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 56626d1a4235..bb4180ef7885 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -77,8 +77,6 @@
300000 937500
200000 925000
>;
- cooling-min-level = <15>;
- cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index 123f0cef658d..a8e449471304 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -30,8 +30,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -43,8 +41,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -56,8 +52,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -69,8 +63,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -83,8 +75,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -96,8 +86,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -109,8 +97,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -122,8 +108,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index c593809c7f08..7c130a00d1a8 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -29,8 +29,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -42,8 +40,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -55,8 +51,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -68,8 +62,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -82,8 +74,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -95,8 +85,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -108,8 +96,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -121,8 +107,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
--
2.15.0.194.g9af6a3dea062
next prev parent reply other threads:[~2018-02-09 8:58 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-09 8:58 [PATCH 00/10] thermal: Remove "cooling-{min|max}-level" properties Viresh Kumar
2018-02-09 8:58 ` Viresh Kumar [this message]
2018-02-13 18:16 ` [PATCH 01/10] ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes Krzysztof Kozlowski
2018-02-09 8:58 ` [PATCH 02/10] ARM: dts: omap: " Viresh Kumar
2018-02-12 17:17 ` Tony Lindgren
2018-02-12 17:18 ` Tony Lindgren
2018-02-09 8:58 ` [PATCH 03/10] ARM: dts: mt7623: " Viresh Kumar
2018-02-18 23:26 ` Rob Herring
2018-02-09 8:58 ` [PATCH 04/10] ARM: dts: sun[4-7]i: " Viresh Kumar
2018-02-13 9:13 ` Maxime Ripard
2018-02-13 9:18 ` Chen-Yu Tsai
2018-02-14 3:12 ` Viresh Kumar
2018-02-09 8:58 ` [PATCH 05/10] ARM64: dts: hi6220: " Viresh Kumar
2018-03-02 16:03 ` Wei Xu
2018-02-09 8:58 ` [PATCH 06/10] ARM64: dts: meson: " Viresh Kumar
2018-02-09 9:03 ` Neil Armstrong
2018-03-12 4:32 ` Viresh Kumar
2018-03-20 1:37 ` Viresh Kumar
2018-03-27 12:29 ` Arnd Bergmann
2018-02-09 8:58 ` [PATCH 07/10] ARM: dts: gemini: Remove "cooling-{min|max}-level" for gpio-fan node Viresh Kumar
2018-03-12 4:35 ` Viresh Kumar
2018-03-20 1:43 ` Viresh Kumar
2018-03-20 3:10 ` Linus Walleij
2018-03-27 12:26 ` Arnd Bergmann
2018-03-27 12:29 ` Linus Walleij
2018-02-09 8:58 ` [PATCH 08/10] ARM64: dts: meson: " Viresh Kumar
2018-02-09 9:04 ` Neil Armstrong
2018-02-09 8:58 ` [PATCH 09/10] dt-bindings: cpufreq-dt: Remove "cooling-{min|max}-level" properties Viresh Kumar
2018-02-18 23:26 ` Rob Herring
2018-02-09 8:58 ` [PATCH 10/10] dt-bindings: thermal: " Viresh Kumar
2018-02-18 23:29 ` Rob Herring
2018-02-19 3:43 ` Viresh Kumar
2018-02-19 18:01 ` Rob Herring
2018-03-12 4:38 ` Viresh Kumar
2018-03-20 12:49 ` Zhang Rui
2018-03-27 13:46 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f808613a9c7a4f23d3a0c64b6f3d4df1b905b16b.1518166039.git.viresh.kumar@linaro.org \
--to=viresh.kumar@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=vincent.guittot@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).