From: Icenowy Zheng <icenowy@aosc.io>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Linus Walleij <linus.walleij@linaro.org>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v3 7/7] arm64: allwinner: h6: add support for Pine H64 board
Date: Fri, 23 Feb 2018 20:35:55 +0800 [thread overview]
Message-ID: <20180223123555.64009-8-icenowy@aosc.io> (raw)
In-Reply-To: <20180223123555.64009-6-icenowy@aosc.io>
Pine H64 is an Allwinner H6-based SBC from Pine64, with the following
features:
- 1GiB/2GiB/4GiB LPDDR3 DRAM (in 4GiB situation only 3GiB is
accessible)
- AXP805 PMIC
- Raspberry-Pi-compatible GPIO header, "Euler" GPIO header (not
compatible with the "Euler" on Pine A64) and "Expansion" pin header
- 2 USB 2.0 ports and 1 USB 3.0 ports
- Audio jack
- MicroSD slot and eMMC module slot
- on-board SPI NOR flash
- 1Gbps Ethernet port (via RTL8211E PHY)
- HDMI port
Adds initial support for it, including the UART on the Expansion pin
header.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
---
Changes in v3:
- SPDX license identifier fix.
- Add Andre's Reviewed-by/Tested-by tags.
Changes in v2:
- Switch to SPDX license identifier.
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 29 ++++++++++++++++++++++
2 files changed, 30 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index f505227b0250..addf245226f6 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -10,3 +10,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
new file mode 100644
index 000000000000..d36de5eb81f3
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Pine H64";
+ compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
--
2.15.1
next prev parent reply other threads:[~2018-02-23 12:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 12:35 [PATCH v3 5/7] clk: sunxi-ng: add support for the Allwinner H6 CCU Icenowy Zheng
2018-02-23 12:35 ` [PATCH v3 6/7] arm64: allwinner: h6: add the basical Allwinner H6 DTSI file Icenowy Zheng
2018-02-23 15:20 ` Maxime Ripard
2018-02-23 15:22 ` Icenowy Zheng
2018-02-26 9:26 ` Maxime Ripard
2018-02-26 15:54 ` Samuel Holland
2018-02-28 11:08 ` [linux-sunxi] " Andre Przywara
2018-02-23 12:35 ` Icenowy Zheng [this message]
2018-03-01 9:29 ` [PATCH v3 5/7] clk: sunxi-ng: add support for the Allwinner H6 CCU Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180223123555.64009-8-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).