linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
	Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: niklas.soderlund@ragnatech.se,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2 2/3] media: i2c: adv748x: Add missing CBUS page
Date: Tue, 27 Feb 2018 15:05:49 +0000	[thread overview]
Message-ID: <1519743950-28346-3-git-send-email-kieran.bingham+renesas@ideasonboard.com> (raw)
In-Reply-To: <1519743950-28346-1-git-send-email-kieran.bingham+renesas@ideasonboard.com>

From: Kieran Bingham <kieran.bingham@ideasonboard.com>

The ADV748x has 12 pages mapped onto I2C addresses.

In the existing implementation only 11 are mapped correctly in the page
enumerations, which causes an off-by-one fault on pages above the
infoframe definition due to a missing 'CBUS' page.

This causes the address for the CEC, SDP, TXA, and TXB to be incorrectly
programmed during the iterations in adv748x_initialise_clients().

Until now this has gone un-noticed due to the fact that following the
creation of the clients - the device is reset and the addresses are
reprogrammed in manually by the call to "adv748x_write_regs(state,
adv748x_set_slave_address);"

As part of moving to dynamic i2c address allocations repair this by
providing the missing CBUS page definition.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
v2
 - Remove period from commit title.
 - Collect Niklas' RB tag.


 drivers/media/i2c/adv748x/adv748x-core.c | 3 +++
 drivers/media/i2c/adv748x/adv748x.h      | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index faf73949962b..9dcaadaca217 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -52,6 +52,7 @@ static const struct regmap_config adv748x_regmap_cnf[] = {
 	ADV748X_REGMAP_CONF("edid"),
 	ADV748X_REGMAP_CONF("repeater"),
 	ADV748X_REGMAP_CONF("infoframe"),
+	ADV748X_REGMAP_CONF("cbus"),
 	ADV748X_REGMAP_CONF("cec"),
 	ADV748X_REGMAP_CONF("sdp"),
 	ADV748X_REGMAP_CONF("txa"),
@@ -89,6 +90,7 @@ static int adv748x_i2c_addresses[ADV748X_PAGE_MAX] = {
 	ADV748X_I2C_EDID,
 	ADV748X_I2C_REPEATER,
 	ADV748X_I2C_INFOFRAME,
+	ADV748X_I2C_CBUS,
 	ADV748X_I2C_CEC,
 	ADV748X_I2C_SDP,
 	ADV748X_I2C_TXB,
@@ -352,6 +354,7 @@ static const struct adv748x_reg_value adv748x_set_slave_address[] = {
 	{ADV748X_PAGE_IO, 0xf6, ADV748X_I2C_EDID << 1},
 	{ADV748X_PAGE_IO, 0xf7, ADV748X_I2C_REPEATER << 1},
 	{ADV748X_PAGE_IO, 0xf8, ADV748X_I2C_INFOFRAME << 1},
+	{ADV748X_PAGE_IO, 0xf9, ADV748X_I2C_CBUS << 1},
 	{ADV748X_PAGE_IO, 0xfa, ADV748X_I2C_CEC << 1},
 	{ADV748X_PAGE_IO, 0xfb, ADV748X_I2C_SDP << 1},
 	{ADV748X_PAGE_IO, 0xfc, ADV748X_I2C_TXB << 1},
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index 6789e2f3bc8c..725662edc4b8 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -35,6 +35,7 @@
 #define ADV748X_I2C_EDID		0x36	/* EDID Map */
 #define ADV748X_I2C_REPEATER		0x32	/* HDMI RX Repeater Map */
 #define ADV748X_I2C_INFOFRAME		0x31	/* HDMI RX InfoFrame Map */
+#define ADV748X_I2C_CBUS		0x30	/* CBUS MHL Map */
 #define ADV748X_I2C_CEC			0x41	/* CEC Map */
 #define ADV748X_I2C_SDP			0x79	/* SDP Map */
 #define ADV748X_I2C_TXB			0x48	/* CSI-TXB Map */
@@ -48,6 +49,7 @@ enum adv748x_page {
 	ADV748X_PAGE_EDID,
 	ADV748X_PAGE_REPEATER,
 	ADV748X_PAGE_INFOFRAME,
+	ADV748X_PAGE_CBUS,
 	ADV748X_PAGE_CEC,
 	ADV748X_PAGE_SDP,
 	ADV748X_PAGE_TXB,
-- 
2.7.4

  parent reply	other threads:[~2018-02-27 15:07 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1519743950-28346-1-git-send-email-kieran.bingham+renesas@ideasonboard.com>
2018-02-27 15:05 ` [PATCH v2 1/3] media: i2c: adv748x: Simplify regmap configuration Kieran Bingham
2018-03-01 15:47   ` Niklas Söderlund
2018-02-27 15:05 ` Kieran Bingham [this message]
2018-02-27 15:05 ` [PATCH v2 3/3] media: i2c: adv748x: Add support for i2c_new_secondary_device Kieran Bingham
2018-03-01 15:56   ` Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519743950-28346-3-git-send-email-kieran.bingham+renesas@ideasonboard.com \
    --to=kieran.bingham+renesas@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).