[PATCH v2] usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume

From: Roger Quadros <rogerq@ti.com>
To: <balbi@kernel.org>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<rogerq@ti.com>
Subject: [PATCH v2] usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
Date: Fri, 9 Mar 2018 14:47:04 +0200	[thread overview]
Message-ID: <a04fafee-7992-ce8b-55a9-afd4c9935462@ti.com> (raw)
In-Reply-To: <1519730526-22274-1-git-send-email-rogerq@ti.com>

In the following test we get stuck by sleeping forever in _dwc3_set_mode()
after which dual-role switching doesn't work.

On dra7-evm's dual-role port,
- Load g_zero gadget driver and enumerate to host
- suspend to mem
- disconnect USB cable to host and connect otg cable with Pen drive in it.
- resume system
- we sleep indefinitely in _dwc3_set_mode due to.
  dwc3_gadget_exit()->usb_del_gadget_udc()->udc_stop()->
	dwc3_gadget_stop()->wait_event_lock_irq()

To fix this instead of waiting indefinitely with wait_event_lock_irq()
we use wait_event_interruptible_lock_irq_timeout() and print
and error message if there was a timeout.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---

Changelog:

v2:
- use wait_event_interruptible_lock_irq_timeout() instead of wait_event_lock_irq()

 drivers/usb/dwc3/gadget.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2bda4eb..7c3a6e4 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1950,6 +1950,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
 	struct dwc3		*dwc = gadget_to_dwc(g);
 	unsigned long		flags;
 	int			epnum;
+	u32			tmo_eps = 0;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
@@ -1960,6 +1961,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
 
 	for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
 		struct dwc3_ep  *dep = dwc->eps[epnum];
+		int ret;
 
 		if (!dep)
 			continue;
@@ -1967,9 +1969,24 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
 		if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
 			continue;
 
-		wait_event_lock_irq(dep->wait_end_transfer,
-				    !(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
-				    dwc->lock);
+		ret = wait_event_interruptible_lock_irq_timeout(dep->wait_end_transfer,
+			    !(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
+			    dwc->lock, msecs_to_jiffies(5));
+
+		if (ret <= 0) {
+			/* Timed out or interrupted! There's nothing much
+			 * we can do so we just log here and print which
+			 * endpoints timed out at the end.
+			 */
+			tmo_eps |= 1 << epnum;
+			dep->flags &= DWC3_EP_END_TRANSFER_PENDING;
+		}
+	}
+
+	if (tmo_eps) {
+		dev_err(dwc->dev,
+			"end transfer timed out on endpoints 0x%x [bitmap]\n",
+			tmo_eps);
 	}
 
 out:
-- 
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


