From: Patrick Mansfield <patmans@us.ibm.com>
To: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: [RFC] [PATCH] 3/7 2.5.35 SCSI multi-path
Date: Tue, 17 Sep 2002 15:51:20 -0700 [thread overview]
Message-ID: <20020917155120.C18424@eng2.beaverton.ibm.com> (raw)
In-Reply-To: <20020917155041.B18424@eng2.beaverton.ibm.com>; from patman on Tue, Sep 17, 2002 at 03:50:41PM -0700
Patch 3 of 3 to add mid-layer scsi changes to simplify and enable the
addition of scsi multi-path IO support.
This does not add multi-path support, it adds changes that simplify the
addition of the actual scsi multi-path code.
drivers/scsi/scsi_merge.c | 59 +++++++
drivers/scsi/scsi_proc.c | 8 -
drivers/scsi/scsi_queue.c | 29 +++
drivers/scsi/scsi_scan.c | 361 +++++++++++++++++++++++-----------------------
drivers/scsi/scsi_syms.c | 6
include/scsi/scsi.h | 23 ++
6 files changed, 303 insertions(+), 183 deletions(-)
diff -Nru a/drivers/scsi/scsi_merge.c b/drivers/scsi/scsi_merge.c
--- a/drivers/scsi/scsi_merge.c Mon Sep 16 15:29:45 2002
+++ b/drivers/scsi/scsi_merge.c Mon Sep 16 15:29:45 2002
@@ -22,6 +22,7 @@
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/slab.h>
+#include <linux/bio.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/stat.h>
@@ -117,6 +118,58 @@
}
/*
+ * Function: scsi_cleanup_io()
+ *
+ * Purpose: SCSI I/O cleanup io function.
+ *
+ * Arguments: SCpnt - Command descriptor we wish to cleanup
+ *
+ * Returns: N/A
+ *
+ * Lock status:
+ *
+ * Notes: Code was previously part of scsi_io_completion, moved here
+ * as we now also call it when redriving IO that does not make
+ * it to the upper layer.
+ */
+void scsi_cleanup_io(Scsi_Cmnd *SCpnt)
+{
+ struct request *req = SCpnt->request;
+
+ /*
+ * Free up any indirection buffers we allocated for DMA purposes.
+ * For the case of a READ, we need to copy the data out of the
+ * bounce buffer and into the real buffer.
+ */
+ if (SCpnt->use_sg) {
+ struct scatterlist *sgpnt;
+
+ sgpnt = (struct scatterlist *) SCpnt->buffer;
+ scsi_free_sgtable(SCpnt->buffer, SCpnt->sglist_len);
+ } else {
+ if (SCpnt->buffer != req->buffer) {
+ if (rq_data_dir(req) == READ) {
+ unsigned long flags;
+ char *to = bio_kmap_irq(req->bio, &flags);
+
+ memcpy(to, SCpnt->buffer, SCpnt->bufflen);
+ bio_kunmap_irq(to, &flags);
+ }
+ kfree(SCpnt->buffer);
+ }
+ }
+
+ /*
+ * Zero these out. They now point to freed memory, and it is
+ * dangerous to hang onto the pointers.
+ */
+ SCpnt->buffer = NULL;
+ SCpnt->bufflen = 0;
+ SCpnt->request_buffer = NULL;
+ SCpnt->request_bufflen = 0;
+}
+
+/*
* Function: scsi_initialize_merge_fn()
*
* Purpose: Initialize merge function for a host
@@ -131,16 +184,18 @@
*/
void scsi_initialize_merge_fn(Scsi_Device * SDpnt)
{
- struct Scsi_Host *SHpnt = SDpnt->host;
+ struct Scsi_Host *SHpnt;
request_queue_t *q = &SDpnt->request_queue;
u64 bounce_limit;
+ SHpnt = scsi_get_host(SDpnt);
+ BUG_ON(SHpnt == NULL);
/*
* The generic merging functions work just fine for us.
* Enable highmem I/O, if appropriate.
*/
bounce_limit = BLK_BOUNCE_HIGH;
- if (SHpnt->highmem_io && (SDpnt->type == TYPE_DISK)) {
+ if (SHpnt->highmem_io) {
if (!PCI_DMA_BUS_IS_PHYS)
/* Platforms with virtual-DMA translation
* hardware have no practical limit.
diff -Nru a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
--- a/drivers/scsi/scsi_proc.c Mon Sep 16 15:29:45 2002
+++ b/drivers/scsi/scsi_proc.c Mon Sep 16 15:29:45 2002
@@ -255,15 +255,15 @@
return (cmdIndex);
}
-void proc_print_scsidevice(Scsi_Device * scd, char *buffer, int *size, int len)
+void proc_print_scsidevice(Scsi_Device *scd, char *buffer, int *size, int len)
{
int x, y = *size;
extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
- y = sprintf(buffer + len,
- "Host: scsi%d Channel: %02d Id: %02d Lun: %02d\n Vendor: ",
- scd->host->host_no, scd->channel, scd->id, scd->lun);
+ y = scsi_paths_proc_print_paths(scd, buffer + len,
+ "Host: scsi%d Channel: %02d Id: %02d Lun: %02d\n");
+ y += sprintf(buffer + len + y, "Vendor: ");
for (x = 0; x < 8; x++) {
if (scd->vendor[x] >= 0x20)
y += sprintf(buffer + len + y, "%c", scd->vendor[x]);
diff -Nru a/drivers/scsi/scsi_queue.c b/drivers/scsi/scsi_queue.c
--- a/drivers/scsi/scsi_queue.c Mon Sep 16 15:29:45 2002
+++ b/drivers/scsi/scsi_queue.c Mon Sep 16 15:29:45 2002
@@ -76,7 +76,8 @@
*/
int scsi_mlqueue_insert(Scsi_Cmnd * cmd, int reason)
{
- struct Scsi_Host *host;
+ struct Scsi_Host *host;
+ unsigned long flags;
SCSI_LOG_MLQUEUE(1, printk("Inserting command %p into mlqueue\n", cmd));
@@ -106,7 +107,7 @@
}
}
host->host_blocked = TRUE;
- } else {
+ } else if (reason == SCSI_MLQUEUE_DEVICE_BUSY) {
/*
* Protect against race conditions. If the device isn't busy,
* assume that something actually completed, and that we should
@@ -121,6 +122,11 @@
}
}
cmd->device->device_blocked = TRUE;
+ } else {
+ /*
+ * Must be SCSI_MLQUEUE_RETRY: requeue without marking
+ * host or device as busy.
+ */
}
/*
@@ -134,12 +140,27 @@
* Decrement the counters, since these commands are no longer
* active on the host/device.
*/
+ spin_lock_irqsave(cmd->device->request_queue.queue_lock, flags);
+ cmd->device->device_busy--; /* XXX race */
scsi_host_busy_dec_and_test(cmd->host, cmd->device);
-
+ spin_unlock_irqrestore(cmd->device->request_queue.queue_lock, flags);
/*
* Insert this command at the head of the queue for it's device.
* It will go before all other commands that are already in the queue.
*/
- scsi_insert_special_cmd(cmd, 1);
+ if (cmd->request->flags & REQ_SPECIAL) {
+ /*
+ * Calling this for REQ_CMD requests is fatal.
+ */
+ scsi_insert_special_cmd(cmd, 1);
+ } else {
+ /*
+ * Clean up the IO, and requeue it without setting cmd to
+ * REQ_SPECIAL.
+ */
+ scsi_cleanup_io(cmd);
+ scsi_queue_next_request(&cmd->device->request_queue, cmd,
+ cmd->host);
+ }
return 0;
}
diff -Nru a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
--- a/drivers/scsi/scsi_scan.c Mon Sep 16 15:29:45 2002
+++ b/drivers/scsi/scsi_scan.c Mon Sep 16 15:29:45 2002
@@ -189,26 +189,22 @@
" SCSI scanning, some SCSI devices might not be configured\n"
/*
- * Prefix values for the SCSI id's (stored in driverfs name field)
- */
-#define SCSI_UID_SER_NUM 'S'
-#define SCSI_UID_UNKNOWN 'Z'
-
-/*
- * Return values of some of the scanning functions.
+ * Return values for (some of) the scanning functions, these are masks.
*
* SCSI_SCAN_NO_RESPONSE: no valid response received from the target, this
* includes allocation or general failures preventing IO from being sent.
*
- * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is available
- * on the given LUN.
+ * SCSI_SCAN_TARGET_PRESENT: target responded, a device may or may not be
+ * present on a given LUN in such cases.
+ *
+ * SCSI_SCAN_LUN_PRESENT: A device is available on a given LUN.
*
- * SCSI_SCAN_LUN_PRESENT: target responded, and a device is available on a
- * given LUN.
+ * SCSI_SCAN_NEW_LUN: This is a pre-existing device with a new path.
*/
-#define SCSI_SCAN_NO_RESPONSE 0
-#define SCSI_SCAN_TARGET_PRESENT 1
-#define SCSI_SCAN_LUN_PRESENT 2
+#define SCSI_SCAN_NO_RESPONSE 0x00
+#define SCSI_SCAN_TARGET_PRESENT 0x01
+#define SCSI_SCAN_LUN_PRESENT 0x02
+#define SCSI_SCAN_NEW_LUN 0x04
static char *scsi_null_device_strs = "nullnullnullnull";
@@ -291,15 +287,11 @@
**/
static void scsi_unlock_floptical(Scsi_Request *sreq, unsigned char *result)
{
- Scsi_Device *sdscan = sreq->sr_device;
unsigned char scsi_cmd[MAX_COMMAND_SIZE];
printk(KERN_NOTICE "scsi: unlocking floptical drive\n");
scsi_cmd[0] = MODE_SENSE;
- if (sdscan->scsi_level <= SCSI_2)
- scsi_cmd[1] = (sdscan->lun << 5) & 0xe0;
- else
- scsi_cmd[1] = 0;
+ scsi_cmd[1] = 0;
scsi_cmd[2] = 0x2e;
scsi_cmd[3] = 0;
scsi_cmd[4] = 0x2a; /* size */
@@ -490,9 +482,8 @@
* scsi_alloc_sdev - allocate and setup a Scsi_Device
*
* Description:
- * Allocate, initialize for io, and return a pointer to a Scsi_Device.
- * Stores the @shost, @channel, @id, and @lun in the Scsi_Device, and
- * adds Scsi_Device to the appropriate list.
+ * Allocate, initialize for io, add to the device list, and return a
+ * pointer to a Scsi_Device.
*
* Return value:
* Scsi_Device pointer, or NULL on failure.
@@ -510,10 +501,16 @@
sdev->vendor = scsi_null_device_strs;
sdev->model = scsi_null_device_strs;
sdev->rev = scsi_null_device_strs;
- sdev->host = shost;
- sdev->id = id;
- sdev->lun = lun;
- sdev->channel = channel;
+
+ /*
+ * XXX move this out, if it is overly redundant; if so, be
+ * sure to call scsi_add_path somewhere, or modify
+ * scsi_replace_path.
+ */
+ if (scsi_add_path(sdev, shost, channel, id, lun)) {
+ kfree(sdev);
+ return (NULL);
+ }
sdev->online = TRUE;
/*
* Some low level driver could use device->type
@@ -531,17 +528,7 @@
scsi_initialize_merge_fn(sdev);
init_waitqueue_head(&sdev->scpnt_wait);
- /*
- * Add it to the end of the shost->host_queue list.
- */
- if (shost->host_queue != NULL) {
- sdev->prev = shost->host_queue;
- while (sdev->prev->next != NULL)
- sdev->prev = sdev->prev->next;
- sdev->prev->next = sdev;
- } else
- shost->host_queue = sdev;
-
+ scsi_add_scsi_device(sdev, shost);
}
return (sdev);
}
@@ -556,17 +543,13 @@
**/
static void scsi_free_sdev(Scsi_Device *sdev)
{
- if (sdev->prev != NULL)
- sdev->prev->next = sdev->next;
- else
- sdev->host->host_queue = sdev->next;
- if (sdev->next != NULL)
- sdev->next->prev = sdev->prev;
-
+ /*
+ * XXX move the following to scsi_remove_scsi_device?
+ */
+ scsi_remove_path(sdev, SCSI_FIND_ALL_HOST_NO, SCSI_FIND_ALL_CHANNEL,
+ SCSI_FIND_ALL_ID, SCSI_FIND_ALL_LUN);
blk_cleanup_queue(&sdev->request_queue);
- if (sdev->inquiry != NULL)
- kfree(sdev->inquiry);
- kfree(sdev);
+ scsi_remove_scsi_device(sdev);
}
/**
@@ -585,11 +568,10 @@
static int scsi_check_id_size(Scsi_Device *sdev, int size)
{
if (size > DEVICE_NAME_SIZE) {
- printk(KERN_WARNING "scsi scan: host %d channel %d id %d lun %d"
- " identifier too long, length %d, max %d. Device might"
- " be improperly identified.\n", sdev->host->host_no,
- sdev->channel, sdev->id, sdev->lun, size,
- DEVICE_NAME_SIZE);
+ printk(KERN_WARNING "scsi scan: ");
+ scsi_paths_printk(sdev, " ", "host %d channel %d id %d lun %d");
+ printk(" identifier too long, length %d, max %d. Device might"
+ " be improperly identified.\n", size, DEVICE_NAME_SIZE);
return 1;
} else
return 0;
@@ -607,32 +589,28 @@
* Return:
* A pointer to data containing the results on success, else NULL.
**/
-unsigned char *scsi_get_evpd_page(Scsi_Device *sdev, Scsi_Request *sreq)
+unsigned char *scsi_get_evpd_page(Scsi_Device *sdev, Scsi_Request *sreq,
+ struct scsi_path_id *pathid)
{
unsigned char *evpd_page;
unsigned char scsi_cmd[MAX_COMMAND_SIZE];
- int lun = sdev->lun;
- int scsi_level = sdev->scsi_level;
int max_lgth = 255;
retry:
evpd_page = kmalloc(max_lgth, GFP_ATOMIC |
- (sdev->host->unchecked_isa_dma) ?
+ (pathid->spi_shpnt->unchecked_isa_dma) ?
GFP_DMA : 0);
if (!evpd_page) {
- printk(KERN_WARNING "scsi scan: Allocation failure identifying"
- " host %d channel %d id %d lun %d, device might be"
- " improperly identified.\n", sdev->host->host_no,
- sdev->channel, sdev->id, sdev->lun);
+ printk(KERN_WARNING "scsi scan: Allocation failure identifying ");
+ scsi_paths_printk(sdev, " ", "host %d channel %d id %d lun %d");
+ printk("device might be improperly identified.\n");
return NULL;
}
+ memset(evpd_page, 0, max_lgth);
memset(scsi_cmd, 0, MAX_COMMAND_SIZE);
scsi_cmd[0] = INQUIRY;
- if ((lun > 0) && (scsi_level <= SCSI_2))
- scsi_cmd[1] = ((lun << 5) & 0xe0) | 0x01;
- else
- scsi_cmd[1] = 0x01; /* SCSI_3 and higher, don't touch */
+ scsi_cmd[1] = 0x01;
scsi_cmd[4] = max_lgth;
sreq->sr_cmd_len = 0;
sreq->sr_sense_buffer[0] = 0;
@@ -865,33 +843,30 @@
* 0: Failure
* 1: Success
**/
-int scsi_get_deviceid(Scsi_Device *sdev, Scsi_Request *sreq)
+int scsi_get_deviceid(Scsi_Device *sdev, Scsi_Request *sreq,
+ struct scsi_path_id *pathid)
{
unsigned char *id_page;
unsigned char scsi_cmd[MAX_COMMAND_SIZE];
int id_idx, scnt, ret;
- int lun = sdev->lun;
- int scsi_level = sdev->scsi_level;
int max_lgth = 255;
+
retry:
id_page = kmalloc(max_lgth, GFP_ATOMIC |
- (sdev->host->unchecked_isa_dma) ?
+ (pathid->spi_shpnt->unchecked_isa_dma) ?
GFP_DMA : 0);
if (!id_page) {
- printk(KERN_WARNING "scsi scan: Allocation failure identifying"
- " host %d channel %d id %d lun %d, device might be"
- " improperly identified.\n", sdev->host->host_no,
- sdev->channel, sdev->id, sdev->lun);
+ printk(KERN_WARNING "scsi scan: Allocation failure identifying ");
+ scsi_paths_printk(sdev, " ", "host %d channel %d id %d lun %d");
+ printk("device might be improperly identified.\n");
return 0;
}
+ memset(id_page, 0, max_lgth);
memset(scsi_cmd, 0, MAX_COMMAND_SIZE);
scsi_cmd[0] = INQUIRY;
- if ((lun > 0) && (scsi_level <= SCSI_2))
- scsi_cmd[1] = ((lun << 5) & 0xe0) | 0x01;
- else
- scsi_cmd[1] = 0x01; /* SCSI_3 and higher, don't touch */
+ scsi_cmd[1] = 0x01;
scsi_cmd[2] = 0x83;
scsi_cmd[4] = max_lgth;
sreq->sr_cmd_len = 0;
@@ -930,8 +905,9 @@
SCSI_LOG_SCAN_BUS(4, printk(KERN_INFO
"scsi scan: host %d channel %d id %d lun %d"
" used id desc %d/%d/%d\n",
- sdev->host->host_no, sdev->channel,
- sdev->id, sdev->lun,
+ pathid->spi_shpnt->host_no,
+ pathid->spi_channel, pathid->spi_id,
+ pathid->spi_lun,
id_search_list[id_idx].id_type,
id_search_list[id_idx].naa_type,
id_search_list[id_idx].code_set));
@@ -941,8 +917,9 @@
SCSI_LOG_SCAN_BUS(4, printk(KERN_INFO
"scsi scan: host %d channel %d id %d lun %d"
" no match/error id desc %d/%d/%d\n",
- sdev->host->host_no, sdev->channel,
- sdev->id, sdev->lun,
+ pathid->spi_shpnt->host_no,
+ pathid->spi_channel, pathid->spi_id,
+ pathid->spi_lun,
id_search_list[id_idx].id_type,
id_search_list[id_idx].naa_type,
id_search_list[id_idx].code_set));
@@ -973,32 +950,28 @@
* 0: Failure
* 1: Success
**/
-int scsi_get_serialnumber(Scsi_Device *sdev, Scsi_Request *sreq)
+int scsi_get_serialnumber(Scsi_Device *sdev, Scsi_Request *sreq,
+ struct scsi_path_id *pathid)
{
unsigned char *serialnumber_page;
unsigned char scsi_cmd[MAX_COMMAND_SIZE];
- int lun = sdev->lun;
- int scsi_level = sdev->scsi_level;
int max_lgth = 255;
retry:
serialnumber_page = kmalloc(max_lgth, GFP_ATOMIC |
- (sdev->host->unchecked_isa_dma) ?
+ (pathid->spi_shpnt->unchecked_isa_dma) ?
GFP_DMA : 0);
if (!serialnumber_page) {
- printk(KERN_WARNING "scsi scan: Allocation failure identifying"
- " host %d channel %d id %d lun %d, device might be"
- " improperly identified.\n", sdev->host->host_no,
- sdev->channel, sdev->id, sdev->lun);
+ printk(KERN_WARNING "scsi scan: Allocation failure identifying ");
+ scsi_paths_printk(sdev, " ", "host %d channel %d id %d lun %d");
+ printk("device might be improperly identified.\n");
return 0;
}
+ memset(serialnumber_page, 0, max_lgth);
memset(scsi_cmd, 0, MAX_COMMAND_SIZE);
scsi_cmd[0] = INQUIRY;
- if ((lun > 0) && (scsi_level <= SCSI_2))
- scsi_cmd[1] = ((lun << 5) & 0xe0) | 0x01;
- else
- scsi_cmd[1] = 0x01; /* SCSI_3 and higher, don't touch */
+ scsi_cmd[1] = 0x01;
scsi_cmd[2] = 0x80;
scsi_cmd[4] = max_lgth;
sreq->sr_cmd_len = 0;
@@ -1093,14 +1066,20 @@
{
unsigned char *evpd_page = NULL;
int cnt;
+ struct scsi_path_id pathid;
memset(sdev->sdev_driverfs_dev.name, 0, DEVICE_NAME_SIZE);
- evpd_page = scsi_get_evpd_page(sdev, sreq);
+ if (scsi_get_path(sdev, &pathid)) {
+ printk(KERN_ERR "scsi scan: no path to scan device.\n");
+ scsi_get_default_name(sdev);
+ return;
+ }
+ evpd_page = scsi_get_evpd_page(sdev, sreq, &pathid);
if (evpd_page == NULL) {
/*
* try to obtain serial number anyway
*/
- (void)scsi_get_serialnumber(sdev, sreq);
+ (void)scsi_get_serialnumber(sdev, sreq, &pathid);
} else {
/*
* XXX search high to low, since the pages are lowest to
@@ -1108,23 +1087,25 @@
*/
for(cnt = 4; cnt <= evpd_page[3] + 3; cnt++)
if (evpd_page[cnt] == 0x83)
- if (scsi_get_deviceid(sdev, sreq))
+ if (scsi_get_deviceid(sdev, sreq, &pathid))
goto leave;
for(cnt = 4; cnt <= evpd_page[3] + 3; cnt++)
if (evpd_page[cnt] == 0x80)
- if (scsi_get_serialnumber(sdev, sreq))
+ if (scsi_get_serialnumber(sdev, sreq, &pathid))
goto leave;
- if (sdev->sdev_driverfs_dev.name[0] == 0)
- scsi_get_default_name(sdev);
}
+ if (sdev->sdev_driverfs_dev.name[0] == 0)
+ scsi_get_default_name(sdev);
leave:
if (evpd_page) kfree(evpd_page);
- SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: host %d channel %d"
- " id %d lun %d name/id: '%s'\n", sdev->host->host_no,
- sdev->channel, sdev->id, sdev->lun, sdev->sdev_driverfs_dev.name));
+ SCSI_LOG_SCAN_BUS(3, {
+ printk(KERN_INFO "scsi scan: ");
+ scsi_paths_printk(sdev, " ", "host %d channel %d id %d lun %d");
+ printk(" name/id: '%s'\n", sdev->sdev_driverfs_dev.name);
+ });
return;
}
@@ -1143,9 +1124,10 @@
{
int res = SCSI_2;
Scsi_Device *sdev;
+ scsi_traverse_hndl_t strav_hndl;
- for (sdev = shost->host_queue; sdev; sdev = sdev->next)
- if ((id == sdev->id) && (channel == sdev->channel))
+ scsi_for_each_sdev_lun (&strav_hndl, sdev, shost->host_no,
+ channel, id)
return (int) sdev->scsi_level;
/*
* FIXME No matching target id is configured, this needs to get
@@ -1175,14 +1157,13 @@
unsigned char scsi_cmd[MAX_COMMAND_SIZE];
int possible_inq_resp_len;
- SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY to host %d"
- " channel %d id %d lun %d\n", sdev->host->host_no,
- sdev->channel, sdev->id, sdev->lun));
+ SCSI_LOG_SCAN_BUS(3, {
+ printk(KERN_INFO "scsi scan: INQUIRY to ");
+ scsi_paths_printk(sdev, " ", "host %d channel %d id %d lun %d\n");
+ });
memset(scsi_cmd, 0, 6);
scsi_cmd[0] = INQUIRY;
- if ((sdev->lun > 0) && (sdev->scsi_level <= SCSI_2))
- scsi_cmd[1] = (sdev->lun << 5) & 0xe0;
scsi_cmd[4] = 36; /* issue conservative alloc_length */
sreq->sr_cmd_len = 0;
sreq->sr_data_direction = SCSI_DATA_READ;
@@ -1230,8 +1211,6 @@
if (possible_inq_resp_len > 36) { /* do additional INQUIRY */
memset(scsi_cmd, 0, 6);
scsi_cmd[0] = INQUIRY;
- if ((sdev->lun > 0) && (sdev->scsi_level <= SCSI_2))
- scsi_cmd[1] = (sdev->lun << 5) & 0xe0;
scsi_cmd[4] = (unsigned char) possible_inq_resp_len;
sreq->sr_cmd_len = 0;
sreq->sr_data_direction = SCSI_DATA_READ;
@@ -1308,9 +1287,7 @@
* NULL, store the address of the new Scsi_Device in *@sdevnew (needed
* when scanning a particular LUN).
*
- * Return:
- * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device
- * SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
+ * Returns a SCSI_SCAN_ mask value.
**/
static int scsi_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
Scsi_Request *sreq, char *inq_result, int *bflags)
@@ -1319,9 +1296,19 @@
struct Scsi_Device_Template *sdt;
char devname[64];
extern devfs_handle_t scsi_devfs_handle;
+ struct scsi_path_id pathid;
- sdev = scsi_alloc_sdev(sdevscan->host, sdevscan->channel,
- sdevscan->id, sdevscan->lun);
+ /*
+ * sdevscan must have only one path, add it to this device. XXX
+ * this is a bit ugly, there must be a better solution, maybe pass
+ * a scsi_path_id everywhere.
+ */
+ if (scsi_get_path(sdevscan, &pathid)) {
+ printk(KERN_ERR "scsi scan: no path to scan device.\n");
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+ sdev = scsi_alloc_sdev(pathid.spi_shpnt, pathid.spi_channel,
+ pathid.spi_id, pathid.spi_lun);
if (sdev == NULL)
return SCSI_SCAN_NO_RESPONSE;
@@ -1348,6 +1335,15 @@
sdev->model = (char *) (sdev->inquiry + 16);
sdev->rev = (char *) (sdev->inquiry + 32);
+ /*
+ * XXX move the identifier and driverfs/devfs setup to a new
+ * function
+ *
+ * scsi_load_identifier is the only reason sreq is needed in this
+ * function; it also requires that the inquiry strings be set up.
+ */
+ scsi_load_identifier(sdev, sreq);
+
if (*bflags & BLIST_ISROM) {
/*
* It would be better to modify sdev->type, and set
@@ -1410,20 +1406,12 @@
sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2);
/*
- * XXX maybe move the identifier and driverfs/devfs setup to a new
- * function, and call them after this function is called.
- *
- * scsi_load_identifier is the only reason sreq is needed in this
- * function.
- */
- scsi_load_identifier(sdev, sreq);
-
- /*
* create driverfs files
*/
sprintf(sdev->sdev_driverfs_dev.bus_id,"%d:%d:%d:%d",
- sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
- sdev->sdev_driverfs_dev.parent = &sdev->host->host_driverfs_dev;
+ pathid.spi_shpnt->host_no, pathid.spi_channel, pathid.spi_id,
+ pathid.spi_lun);
+ sdev->sdev_driverfs_dev.parent = &pathid.spi_shpnt->host_driverfs_dev;
sdev->sdev_driverfs_dev.bus = &scsi_driverfs_bus_type;
device_register(&sdev->sdev_driverfs_dev);
@@ -1433,7 +1421,8 @@
device_create_file(&sdev->sdev_driverfs_dev, &dev_attr_type);
sprintf(devname, "host%d/bus%d/target%d/lun%d",
- sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
+ pathid.spi_shpnt->host_no, pathid.spi_channel, pathid.spi_id,
+ pathid.spi_lun);
if (sdev->de)
printk(KERN_WARNING "scsi devfs dir: \"%s\" already exists\n",
devname);
@@ -1468,7 +1457,8 @@
if (sdevnew != NULL)
*sdevnew = sdev;
- return SCSI_SCAN_LUN_PRESENT;
+ return (SCSI_SCAN_TARGET_PRESENT | SCSI_SCAN_LUN_PRESENT |
+ SCSI_SCAN_NEW_LUN);
}
/**
@@ -1481,11 +1471,7 @@
* Call scsi_probe_lun, if a LUN with an attached device is found,
* allocate and set it up by calling scsi_add_lun.
*
- * Return:
- * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device
- * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is
- * attached at the LUN
- * SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
+ * Returns a SCSI_SCAN_ mask value.
**/
static int scsi_probe_and_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
int *bflagsp)
@@ -1495,7 +1481,15 @@
unsigned char *scsi_result = NULL;
int bflags;
int res;
+ struct scsi_path_id pathid;
+ if (sdevnew != NULL)
+ *sdevnew = NULL;
+
+ if (scsi_get_path(sdevscan, &pathid)) {
+ printk(KERN_ERR "scsi scan: no path to scan device.\n");
+ return SCSI_SCAN_NO_RESPONSE;
+ }
/*
* Any command blocks allocated are fixed to use sdevscan->lun,
* so they must be allocated and released if sdevscan->lun
@@ -1521,9 +1515,8 @@
* The sreq is for use only with sdevscan.
*/
- scsi_result = kmalloc(256, GFP_ATOMIC |
- (sdevscan->host->unchecked_isa_dma) ?
- GFP_DMA : 0);
+ scsi_result = kmalloc(256, GFP_ATOMIC |
+ (pathid.spi_shpnt->unchecked_isa_dma) ? GFP_DMA : 0);
if (scsi_result == NULL)
goto alloc_failed;
@@ -1552,12 +1545,12 @@
} else {
res = scsi_add_lun(sdevscan, &sdev, sreq, scsi_result,
&bflags);
- if (res == SCSI_SCAN_LUN_PRESENT) {
+ if (res & SCSI_SCAN_LUN_PRESENT) {
BUG_ON(sdev == NULL);
- if ((bflags & BLIST_KEY) != 0) {
+ if ((res & SCSI_SCAN_NEW_LUN) &&
+ (bflags & BLIST_KEY) != 0) {
sdev->lockable = 0;
- scsi_unlock_floptical(sreq,
- scsi_result);
+ scsi_unlock_floptical(sreq, scsi_result);
/*
* scsi_result no longer contains
* the INQUIRY data.
@@ -1606,22 +1599,26 @@
static void scsi_sequential_lun_scan(Scsi_Device *sdevscan, int bflags,
int lun0_res)
{
- struct Scsi_Host *shost = sdevscan->host;
unsigned int sparse_lun;
unsigned int max_dev_lun;
+ struct scsi_path_id pathid;
+ if (scsi_get_path(sdevscan, &pathid)) {
+ printk(KERN_ERR "scsi scan: no path to scan device.\n");
+ return;
+ }
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: Sequential scan of"
- " host %d channel %d id %d\n", sdevscan->host->host_no,
- sdevscan->channel, sdevscan->id));
+ " host %d channel %d id %d\n", pathid.spi_shpnt->host_no,
+ pathid.spi_channel, pathid.spi_id));
- max_dev_lun = min(max_scsi_luns, shost->max_lun);
+ max_dev_lun = min(max_scsi_luns, pathid.spi_shpnt->max_lun);
/*
* If this device is known to support sparse multiple units,
* override the other settings, and scan all of them. Normally,
* SCSI-3 devices should be scanned via the REPORT LUNS.
*/
if (bflags & BLIST_SPARSELUN) {
- max_dev_lun = shost->max_lun;
+ max_dev_lun = pathid.spi_shpnt->max_lun;
sparse_lun = 1;
} else
sparse_lun = 0;
@@ -1630,7 +1627,7 @@
* If not sparse lun and no device attached at LUN 0 do not scan
* any further.
*/
- if (!sparse_lun && (lun0_res != SCSI_SCAN_LUN_PRESENT))
+ if (!sparse_lun && !(lun0_res & SCSI_SCAN_LUN_PRESENT))
return;
/*
@@ -1647,7 +1644,7 @@
* the other settings, and scan all of them.
*/
if (bflags & BLIST_FORCELUN)
- max_dev_lun = shost->max_lun;
+ max_dev_lun = pathid.spi_shpnt->max_lun;
/*
* REGAL CDC-4X: avoid hang after LUN 4
*/
@@ -1665,10 +1662,16 @@
* until we reach the max, or no LUN is found and we are not
* sparse_lun.
*/
- for (sdevscan->lun = 1; sdevscan->lun < max_dev_lun; ++sdevscan->lun)
- if ((scsi_probe_and_add_lun(sdevscan, NULL, NULL)
- != SCSI_SCAN_LUN_PRESENT) && !sparse_lun)
+
+ for (pathid.spi_lun = 1; pathid.spi_lun < max_dev_lun;
+ ++pathid.spi_lun) {
+ scsi_replace_path(sdevscan, pathid.spi_shpnt,
+ pathid.spi_channel, pathid.spi_id,
+ pathid.spi_lun);
+ if (!(scsi_probe_and_add_lun(sdevscan, NULL, NULL)
+ & SCSI_SCAN_LUN_PRESENT) && !sparse_lun)
return;
+ }
}
#ifdef CONFIG_SCSI_REPORT_LUNS
@@ -1732,6 +1735,7 @@
ScsiLun *fcp_cur_lun, *lun_data;
Scsi_Request *sreq;
char *data;
+ struct scsi_path_id pathid;
/*
* Only support SCSI-3 and up devices.
@@ -1739,6 +1743,13 @@
if (sdevscan->scsi_level < SCSI_3)
return 1;
+ if (scsi_get_path(sdevscan, &pathid)) {
+ printk(KERN_ERR "scsi scan: no path to scan device.\n");
+ /*
+ * An inconsistency, so don't try scanning any further.
+ */
+ return 0;
+ }
sdevscan->queue_depth = 1;
scsi_build_commandblocks(sdevscan);
if (sdevscan->has_cmdblocks == 0) {
@@ -1750,8 +1761,8 @@
}
sreq = scsi_allocate_request(sdevscan);
- sprintf(devname, "host %d channel %d id %d", sdevscan->host->host_no,
- sdevscan->channel, sdevscan->id);
+ sprintf(devname, "host %d channel %d id %d", pathid.spi_shpnt->host_no,
+ pathid.spi_channel, pathid.spi_id);
/*
* Allocate enough to hold the header (the same size as one ScsiLun)
* plus the max number of luns we are requesting.
@@ -1763,9 +1774,8 @@
* prevent us from finding any LUNs on this target.
*/
length = (max_scsi_report_luns + 1) * sizeof(ScsiLun);
- lun_data = (ScsiLun *) kmalloc(length, GFP_ATOMIC |
- (sdevscan->host->unchecked_isa_dma ?
- GFP_DMA : 0));
+ lun_data = (ScsiLun *) kmalloc(length, GFP_ATOMIC |
+ (pathid.spi_shpnt->unchecked_isa_dma ? GFP_DMA : 0));
if (lun_data == NULL) {
printk(ALLOC_FAILURE_MSG, __FUNCTION__);
scsi_release_commandblocks(sdevscan);
@@ -1845,9 +1855,8 @@
} else
num_luns = (length / sizeof(ScsiLun));
- SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUN scan of"
- " host %d channel %d id %d\n", sdevscan->host->host_no,
- sdevscan->channel, sdevscan->id));
+ SCSI_LOG_SCAN_BUS(3,
+ printk(KERN_INFO "scsi scan: REPORT LUN scan of %s\n", devname));
/*
* Scan the luns in lun_data. The entry at offset 0 is really
* the header, so start at 1 and go up to and including num_luns.
@@ -1877,22 +1886,23 @@
/*
* LUN 0 has already been scanned.
*/
- } else if (lun > sdevscan->host->max_lun) {
+ } else if (lun > pathid.spi_shpnt->max_lun) {
printk(KERN_WARNING "scsi: %s lun%d has a LUN larger"
" than allowed by the host adapter\n",
devname, lun);
} else {
- int res;
-
- sdevscan->lun = lun;
- res = scsi_probe_and_add_lun(sdevscan, NULL, NULL);
- if (res == SCSI_SCAN_NO_RESPONSE) {
+ pathid.spi_lun = lun;
+ scsi_replace_path(sdevscan, pathid.spi_shpnt,
+ pathid.spi_channel, pathid.spi_id,
+ pathid.spi_lun);
+ if (scsi_probe_and_add_lun(sdevscan, NULL, NULL) ==
+ SCSI_SCAN_NO_RESPONSE) {
/*
* Got some results, but now none, abort.
*/
printk(KERN_ERR "scsi: Unexpected response"
" from %s lun %d while scanning, scan"
- " aborted\n", devname, sdevscan->lun);
+ " aborted\n", devname, pathid.spi_lun);
break;
}
}
@@ -1938,18 +1948,15 @@
*/
return;
- sdevscan->host = shost;
- sdevscan->id = id;
- sdevscan->channel = channel;
+ scsi_replace_path(sdevscan, shost, channel, id, 0 /* LUN */);
/*
* Scan LUN 0, if there is some response, scan further. Ideally, we
* would not configure LUN 0 until all LUNs are scanned.
*
* The scsi_level is set (in scsi_probe_lun) if a target responds.
*/
- sdevscan->lun = 0;
res = scsi_probe_and_add_lun(sdevscan, NULL, &bflags);
- if (res != SCSI_SCAN_NO_RESPONSE) {
+ if (res & SCSI_SCAN_TARGET_PRESENT) {
/*
* Some scsi devices cannot properly handle a lun != 0.
* BLIST_NOLUN also prevents a REPORT LUN from being sent.
@@ -1995,9 +2002,10 @@
return;
sdevscan->scsi_level = scsi_find_scsi_level(channel, id, shost);
+ sdevscan->scanning = 1;
res = scsi_probe_and_add_lun(sdevscan, &sdev, NULL);
scsi_free_sdev(sdevscan);
- if (res == SCSI_SCAN_LUN_PRESENT) {
+ if (res & SCSI_SCAN_NEW_LUN) {
BUG_ON(sdev == NULL);
/*
* FIXME calling select_queue_depths is wrong for adapters
@@ -2014,7 +2022,6 @@
*/
if (shost->select_queue_depths != NULL)
(shost->select_queue_depths) (shost, shost->host_queue);
-
for (sdt = scsi_devicelist; sdt; sdt = sdt->next)
if (sdt->init && sdt->dev_noticed)
(*sdt->init) ();
@@ -2080,11 +2087,19 @@
* queue_nr_requests requests are allocated. Don't do so
* here for scsi_scan_selected_lun, since we end up
* calling select_queue_depths with an extra Scsi_Device
- * on the host_queue list.
+ * on the device list.
*/
sdevscan = scsi_alloc_sdev(shost, 0, 0, 0);
if (sdevscan == NULL)
return;
+ /*
+ * Set the scanning bit, so error messages about errors
+ * and path failure are not printed; this should be used
+ * in scsi_error.c to prevent overly aggressive action on
+ * failure for a scan. This is never reset, as the default
+ * state for a new Scsi_Device is 0.
+ */
+ sdevscan->scanning = 1;
/*
* The sdevscan host, channel, id and lun are filled in as
* needed to scan.
diff -Nru a/drivers/scsi/scsi_syms.c b/drivers/scsi/scsi_syms.c
--- a/drivers/scsi/scsi_syms.c Mon Sep 16 15:29:45 2002
+++ b/drivers/scsi/scsi_syms.c Mon Sep 16 15:29:45 2002
@@ -102,6 +102,12 @@
EXPORT_SYMBOL(scsi_add_timer);
EXPORT_SYMBOL(scsi_delete_timer);
+EXPORT_SYMBOL(scsi_add_path);
+EXPORT_SYMBOL(scsi_remove_path);
+EXPORT_SYMBOL(scsi_get_path);
+EXPORT_SYMBOL(scsi_get_host);
+EXPORT_SYMBOL(scsi_paths_printk);
+EXPORT_SYMBOL(scsi_traverse_sdevs);
/*
* driverfs support for determining driver types
*/
diff -Nru a/include/scsi/scsi.h b/include/scsi/scsi.h
--- a/include/scsi/scsi.h Mon Sep 16 15:29:45 2002
+++ b/include/scsi/scsi.h Mon Sep 16 15:29:45 2002
@@ -91,6 +91,29 @@
#define WRITE_LONG_2 0xea
/*
+ * SCSI INQUIRY Flags (byte 7)
+ */
+#define SCSI_EVPD 0x01 /* enable vital product data */
+#define SCSI_RMB7 0x80 /* removable media */
+#define SCSI_AENC 0x80 /* asynchronous event notification capability */
+#define SCSI_TRMIOP 0x40 /* terminate I/O process capability */
+#define SCSI_RELADR7 0x80 /* relative addressing capability */
+#define SCSI_WBUS16 0x20 /* 16 byte wide transfer capabilitiy */
+#define SCSI_WBUS32 0x40 /* 32 byte wide transfer capabilitiy */
+#define SCSI_SYNC 0x10 /* synchronous data transfer capability */
+#define SCSI_LINKED 0x08 /* linked command capability */
+#define SCSI_CMDQUE 0x02 /* command queueing capability */
+#define SCSI_SFTRE 0x01 /* soft reset capability */
+
+/*
+ * SCSI INQUIRY Vital Product Data Page Codes
+ */
+#define SCSI_VPROD_SUPPORTED 0x00
+#define SCSI_VPROD_UNIT_SERIAL 0x80
+#define SCSI_VPROD_AODEFN 0x82
+#define SCSI_VPROD_DEVICE_ID 0x83
+
+/*
* Status codes
*/
next prev parent reply other threads:[~2002-09-17 22:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-17 22:49 [RFC] [PATCH] 0/7 2.5.35 SCSI multi-path Patrick Mansfield
2002-09-17 22:50 ` [RFC] [PATCH] 1/7 " Patrick Mansfield
2002-09-17 22:50 ` [RFC] [PATCH] 2/7 " Patrick Mansfield
2002-09-17 22:51 ` Patrick Mansfield [this message]
2002-09-17 22:52 ` [RFC] [PATCH] 4/7 " Patrick Mansfield
2002-09-17 22:52 ` [RFC] [PATCH] 5/7 " Patrick Mansfield
2002-09-17 22:53 ` [RFC] [PATCH] 6/7 " Patrick Mansfield
2002-09-17 22:54 ` [RFC] [PATCH] 7/7 " Patrick Mansfield
2002-09-18 15:17 ` [RFC] [PATCH] 0/7 " Brian Waite
2002-09-18 16:08 ` Patrick Mansfield
2002-09-19 21:16 ` Bill Davidsen
2002-09-19 21:29 ` Brian Waite
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020917155120.C18424@eng2.beaverton.ibm.com \
--to=patmans@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).