linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Fabrice Gasnier <fabrice.gasnier@st.com>
To: <jic23@kernel.org>, <robh+dt@kernel.org>, <alexandre.torgue@st.com>
Cc: <mark.rutland@arm.com>, <mcoquelin.stm32@gmail.com>,
	<lars@metafoo.de>, <knaack.h@gmx.de>, <pmeerw@pmeerw.net>,
	<fabrice.gasnier@st.com>, <linux-iio@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <benjamin.gaignard@linaro.org>,
	<arnaud.pouliquen@st.com>
Subject: [PATCH] iio: adc: stm32-dfsdm: Add support for stm32mp1
Date: Wed, 2 May 2018 15:05:23 +0200	[thread overview]
Message-ID: <1525266323-4922-1-git-send-email-fabrice.gasnier@st.com> (raw)

Add support for DFSDM (Digital Filter For Sigma Delta Modulators)
to STM32MP1. This variant is close to STM32H7 DFSDM, it implements
6 filter instances. Registers map is also increased.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 .../bindings/iio/adc/st,stm32-dfsdm-adc.txt         |  7 +++++--
 drivers/iio/adc/stm32-dfsdm-core.c                  | 21 +++++++++++++++++++++
 2 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
index ed7520d..75ba25d 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
@@ -8,14 +8,16 @@ It is mainly targeted for:
 - PDM microphones (audio digital microphone)
 
 It features up to 8 serial digital interfaces (SPI or Manchester) and
-up to 4 filters on stm32h7.
+up to 4 filters on stm32h7 or 6 filters on stm32mp1.
 
 Each child node match with a filter instance.
 
 Contents of a STM32 DFSDM root node:
 ------------------------------------
 Required properties:
-- compatible: Should be "st,stm32h7-dfsdm".
+- compatible: Should be one of:
+  "st,stm32h7-dfsdm"
+  "st,stm32mp1-dfsdm"
 - reg: Offset and length of the DFSDM block register set.
 - clocks: IP and serial interfaces clocking. Should be set according
 		to rcc clock ID and "clock-names".
@@ -45,6 +47,7 @@ Required properties:
 	"st,stm32-dfsdm-adc" for sigma delta ADCs
 	"st,stm32-dfsdm-dmic" for audio digital microphone.
 - reg: Specifies the DFSDM filter instance used.
+	Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1.
 - interrupts: IRQ lines connected to each DFSDM filter instance.
 - st,adc-channels:	List of single-ended channels muxed for this ADC.
 			valid values:
diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c
index e50efdc..d924e6c 100644
--- a/drivers/iio/adc/stm32-dfsdm-core.c
+++ b/drivers/iio/adc/stm32-dfsdm-core.c
@@ -25,6 +25,8 @@ struct stm32_dfsdm_dev_data {
 
 #define STM32H7_DFSDM_NUM_FILTERS	4
 #define STM32H7_DFSDM_NUM_CHANNELS	8
+#define STM32MP1_DFSDM_NUM_FILTERS	6
+#define STM32MP1_DFSDM_NUM_CHANNELS	8
 
 static bool stm32_dfsdm_volatile_reg(struct device *dev, unsigned int reg)
 {
@@ -61,6 +63,21 @@ static bool stm32_dfsdm_volatile_reg(struct device *dev, unsigned int reg)
 	.regmap_cfg = &stm32h7_dfsdm_regmap_cfg,
 };
 
+static const struct regmap_config stm32mp1_dfsdm_regmap_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = sizeof(u32),
+	.max_register = 0x7fc,
+	.volatile_reg = stm32_dfsdm_volatile_reg,
+	.fast_io = true,
+};
+
+static const struct stm32_dfsdm_dev_data stm32mp1_dfsdm_data = {
+	.num_filters = STM32MP1_DFSDM_NUM_FILTERS,
+	.num_channels = STM32MP1_DFSDM_NUM_CHANNELS,
+	.regmap_cfg = &stm32mp1_dfsdm_regmap_cfg,
+};
+
 struct dfsdm_priv {
 	struct platform_device *pdev; /* platform device */
 
@@ -243,6 +260,10 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
 		.compatible = "st,stm32h7-dfsdm",
 		.data = &stm32h7_dfsdm_data,
 	},
+	{
+		.compatible = "st,stm32mp1-dfsdm",
+		.data = &stm32mp1_dfsdm_data,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, stm32_dfsdm_of_match);
-- 
1.9.1

             reply	other threads:[~2018-05-02 13:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-02 13:05 Fabrice Gasnier [this message]
2018-05-06 17:56 ` [PATCH] iio: adc: stm32-dfsdm: Add support for stm32mp1 Jonathan Cameron
2018-05-07 20:51 ` Rob Herring
2018-05-12  9:33   ` Jonathan Cameron
2018-05-15 15:23     ` Fabrice Gasnier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525266323-4922-1-git-send-email-fabrice.gasnier@st.com \
    --to=fabrice.gasnier@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=arnaud.pouliquen@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).