linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Antoine Tenart <antoine.tenart@bootlin.com>
To: davem@davemloft.net, kishon@ti.com, linux@armlinux.org.uk,
	gregory.clement@bootlin.com, andrew@lunn.ch,
	jason@lakedaemon.net, sebastian.hesselbarth@gmail.com
Cc: Antoine Tenart <antoine.tenart@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	thomas.petazzoni@bootlin.com, maxime.chevallier@bootlin.com,
	miquel.raynal@bootlin.com, nadavh@marvell.com,
	stefanc@marvell.com, ymarkman@marvell.com, mw@semihalf.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v3 04/10] phy: cp110-comphy: 2.5G SGMII mode
Date: Thu, 17 May 2018 10:29:33 +0200	[thread overview]
Message-ID: <20180517082939.14598-5-antoine.tenart@bootlin.com> (raw)
In-Reply-To: <20180517082939.14598-1-antoine.tenart@bootlin.com>

This patch allow the CP110 comphy to configure some lanes in the
2.5G SGMII mode. This mode is quite close to SGMII and uses nearly the
same code path.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index a0d522154cdf..4ef429250d7b 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -135,19 +135,25 @@ struct mvebu_comhy_conf {
 static const struct mvebu_comhy_conf mvebu_comphy_cp110_modes[] = {
 	/* lane 0 */
 	MVEBU_COMPHY_CONF(0, 1, PHY_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(0, 1, PHY_MODE_2500SGMII, 0x1),
 	/* lane 1 */
 	MVEBU_COMPHY_CONF(1, 2, PHY_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(1, 2, PHY_MODE_2500SGMII, 0x1),
 	/* lane 2 */
 	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_2500SGMII, 0x1),
 	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_10GKR, 0x1),
 	/* lane 3 */
 	MVEBU_COMPHY_CONF(3, 1, PHY_MODE_SGMII, 0x2),
+	MVEBU_COMPHY_CONF(3, 1, PHY_MODE_2500SGMII, 0x2),
 	/* lane 4 */
 	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_SGMII, 0x2),
+	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_2500SGMII, 0x2),
 	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_10GKR, 0x2),
 	MVEBU_COMPHY_CONF(4, 1, PHY_MODE_SGMII, 0x1),
 	/* lane 5 */
 	MVEBU_COMPHY_CONF(5, 2, PHY_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(5, 2, PHY_MODE_2500SGMII, 0x1),
 };
 
 struct mvebu_comphy_priv {
@@ -206,6 +212,10 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
 	if (mode == PHY_MODE_10GKR)
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xe) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xe);
+	else if (mode == PHY_MODE_2500SGMII)
+		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x8) |
+		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x8) |
+		       MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
 	else if (mode == PHY_MODE_SGMII)
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x6) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x6) |
@@ -296,13 +306,13 @@ static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane,
 	return 0;
 }
 
-static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
+static int mvebu_comphy_set_mode_sgmii(struct phy *phy, enum phy_mode mode)
 {
 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
 	struct mvebu_comphy_priv *priv = lane->priv;
 	u32 val;
 
-	mvebu_comphy_ethernet_init_reset(lane, PHY_MODE_SGMII);
+	mvebu_comphy_ethernet_init_reset(lane, mode);
 
 	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 	val &= ~MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
@@ -487,7 +497,8 @@ static int mvebu_comphy_power_on(struct phy *phy)
 
 	switch (lane->mode) {
 	case PHY_MODE_SGMII:
-		ret = mvebu_comphy_set_mode_sgmii(phy);
+	case PHY_MODE_2500SGMII:
+		ret = mvebu_comphy_set_mode_sgmii(phy, lane->mode);
 		break;
 	case PHY_MODE_10GKR:
 		ret = mvebu_comphy_set_mode_10gkr(phy);
-- 
2.17.0

  parent reply	other threads:[~2018-05-17  8:30 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-17  8:29 [PATCH net-next v3 00/10] net: mvpp2: phylink conversion Antoine Tenart
2018-05-17  8:29 ` [PATCH net-next v3 01/10] net: mvpp2: align the ethtool ops definition Antoine Tenart
2018-05-17  8:29 ` [PATCH net-next v3 02/10] net: mvpp2: phylink support Antoine Tenart
2018-08-27 16:50   ` Russell King - ARM Linux
2018-08-31 13:36     ` Antoine Tenart
2018-08-31 14:11       ` Russell King - ARM Linux
2018-08-31 14:37         ` Andrew Lunn
2018-08-31 15:21           ` Russell King - ARM Linux
2018-09-12 14:34             ` Antoine Tenart
2018-08-31 15:08         ` Antoine Tenart
2018-08-31 14:18       ` Andrew Lunn
2018-08-31 14:23         ` Antoine Tenart
2018-05-17  8:29 ` [PATCH net-next v3 03/10] phy: add 2.5G SGMII mode to the phy_mode enum Antoine Tenart
2018-05-17  8:29 ` Antoine Tenart [this message]
2018-05-17  8:29 ` [PATCH net-next v3 05/10] net: mvpp2: 1000baseX support Antoine Tenart
2018-05-17  8:29 ` [PATCH net-next v3 06/10] net: mvpp2: 2500baseX support Antoine Tenart
2018-05-17  8:29 ` [PATCH net-next v3 07/10] arm64: dts: marvell: mcbin: add 10G SFP support Antoine Tenart
2018-05-17  8:29 ` [PATCH net-next v3 08/10] arm64: dts: marvell: mcbin: enable the fourth network interface Antoine Tenart
2018-05-17  8:29 ` [PATCH net-next v3 09/10] arm64: dts: marvell: 8040-db: describe the 10G interfaces as fixed-link Antoine Tenart
2018-05-17  8:29 ` [PATCH net-next v3 10/10] arm64: dts: marvell: 7040-db: describe the 10G interface " Antoine Tenart
2018-05-17  9:18 ` [PATCH net-next v3 00/10] net: mvpp2: phylink conversion Russell King - ARM Linux
2018-05-17  9:26   ` Antoine Tenart
2018-05-17 12:23 ` Gregory CLEMENT
2018-05-17 20:12 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180517082939.14598-5-antoine.tenart@bootlin.com \
    --to=antoine.tenart@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=gregory.clement@bootlin.com \
    --cc=jason@lakedaemon.net \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=maxime.chevallier@bootlin.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=stefanc@marvell.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=ymarkman@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).