linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joel Fernandes <joelaf@google.com>
To: linux-kernel@vger.kernel.org
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>,
	Steven Rostedt <rostedt@goodmis.org>,
	Peter Zilstra <peterz@infradead.org>,
	Ingo Molnar <mingo@redhat.com>,
	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
	Tom Zanussi <tom.zanussi@linux.intel.com>,
	Namhyung Kim <namhyung@kernel.org>,
	Thomas Glexiner <tglx@linutronix.de>,
	Boqun Feng <boqun.feng@gmail.com>,
	Paul McKenney <paulmck@linux.vnet.ibm.com>,
	Masami Hiramatsu <mhiramat@kernel.org>,
	Todd Kjos <tkjos@google.com>, Erick Reyes <erickreyes@google.com>,
	Julia Cartwright <julia@ni.com>,
	kernel-team@android.com
Subject: [PATCH 1/2] lib: Add module to simulate atomic sections for testing {preempt,irqs}off tracers
Date: Thu, 17 May 2018 18:59:01 -0700	[thread overview]
Message-ID: <20180518015902.131427-2-joelaf@google.com> (raw)
In-Reply-To: <20180518015902.131427-1-joelaf@google.com>

From: "Joel Fernandes (Google)" <joel@joelfernandes.org>

In this patch we introduce a test module for simulating a long atomic
section in the kernel which the preemptoff or irqsoff tracers can
detect. This module is to be used only for test purposes and is default
disabled.

Following is the expected output (only briefly shown) that can be parsed
to verify that the tracers are working correctly. We will use this from
the kselftests in future patches.

For the preemptoff tracer:

echo preemptoff > /d/tracing/current_tracer
sleep 1
insmod ./test_atomic_sections.ko atomic_mode=preempt atomic_time=500000
sleep 1
bash-4.3# cat /d/tracing/trace
preempt -1066    2...2    0us@: atomic_sect_run <-atomic_sect_run
preempt -1066    2...2 500002us : atomic_sect_run <-atomic_sect_run
preempt -1066    2...2 500004us : tracer_preempt_on <-atomic_sect_run
preempt -1066    2...2 500012us : <stack trace>
 => kthread
 => ret_from_fork

For the irqsoff tracer:

echo irqsoff > /d/tracing/current_tracer
sleep 1
insmod ./test_atomic_sections.ko atomic_mode=irq atomic_time=500000
sleep 1
bash-4.3# cat /d/tracing/trace
irq dis -1069    1d..1    0us@: atomic_sect_run
irq dis -1069    1d..1 500001us : atomic_sect_run
irq dis -1069    1d..1 500002us : tracer_hardirqs_on <-atomic_sect_run
irq dis -1069    1d..1 500005us : <stack trace>
 => ret_from_fork

Co-authored-by: Erick Reyes <erickreyes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zilstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Glexiner <tglx@linutronix.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Erick Reyes <erickreyes@google.com>
Cc: Julia Cartwright <julia@ni.com>
Cc: kernel-team@android.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
 lib/Kconfig.debug          |  9 +++++
 lib/Makefile               |  1 +
 lib/test_atomic_sections.c | 80 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 90 insertions(+)
 create mode 100644 lib/test_atomic_sections.c

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index c40c7b734cd1..4bb865a1f430 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1933,6 +1933,15 @@ config TEST_KMOD
 
 	  If unsure, say N.
 
+config TEST_ATOMIC_SECTIONS
+	tristate "Simulate atomic sections for tracers to detect"
+	default n
+	depends on m
+	help
+	  Select this option to build a test module that can help test atomic
+	  sections by simulating them with a duration supplied as a module
+	  parameter. Preempt disable and irq disable modes can be requested.
+
 config TEST_DEBUG_VIRTUAL
 	tristate "Test CONFIG_DEBUG_VIRTUAL feature"
 	depends on DEBUG_VIRTUAL
diff --git a/lib/Makefile b/lib/Makefile
index ce20696d5a92..e82cf5445b7b 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -46,6 +46,7 @@ obj-y += string_helpers.o
 obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
 obj-y += hexdump.o
 obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
+obj-$(CONFIG_TEST_ATOMIC_SECTIONS) += test_atomic_sections.o
 obj-y += kstrtox.o
 obj-$(CONFIG_FIND_BIT_BENCHMARK) += find_bit_benchmark.o
 obj-$(CONFIG_TEST_BPF) += test_bpf.o
diff --git a/lib/test_atomic_sections.c b/lib/test_atomic_sections.c
new file mode 100644
index 000000000000..3c8816c333c0
--- /dev/null
+++ b/lib/test_atomic_sections.c
@@ -0,0 +1,80 @@
+/*
+ * Atomic section emulation test module
+ *
+ * Emulates atomic sections by disabling IRQs or preemption
+ * and doing a busy wait for a specified amount of time.
+ * This can be used for testing of different atomic section
+ * tracers such as irqsoff tracers.
+ *
+ * (c) 2018. Google LLC
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ktime.h>
+#include <linux/irq.h>
+#include <linux/printk.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/kthread.h>
+
+static int atomic_time = 100;
+static char atomic_mode[10] = "irq";
+
+module_param_named(atomic_time, atomic_time, int, S_IRUGO);
+module_param_string(atomic_mode, atomic_mode, 10, S_IRUGO);
+MODULE_PARM_DESC(atomic_time, "Period in microseconds (100 uS default)");
+MODULE_PARM_DESC(atomic_mode, "Mode of the test such as preempt or irq (default irq)");
+
+static void busy_wait(int time)
+{
+	ktime_t start, end;
+	start = ktime_get();
+	do {
+		end = ktime_get();
+		if (kthread_should_stop())
+			break;
+	} while (ktime_to_ns(ktime_sub(end, start)) < (time * 1000));
+}
+
+void atomic_sect_run(void *data)
+{
+	unsigned long flags;
+
+	if (!strcmp(atomic_mode, "irq")) {
+		local_irq_save(flags);
+		busy_wait(atomic_time);
+		local_irq_restore(flags);
+	} else if (!strcmp(atomic_mode, "preempt")) {
+		preempt_disable();
+		busy_wait(atomic_time);
+		preempt_enable();
+	}
+	do_exit(0);
+}
+
+
+static int __init atomic_sect_init(void)
+{
+	char task_name[50];
+	struct task_struct *test_task;
+
+	sprintf(task_name, "%s dis test", atomic_mode);
+
+	test_task = kthread_run((void*)atomic_sect_run, NULL, task_name);
+	if (IS_ERR(test_task)) {
+		return -1;
+	}
+
+	return 0;
+}
+
+static void __exit atomic_sect_exit(void)
+{
+	return 0;
+}
+
+module_init(atomic_sect_init)
+module_exit(atomic_sect_exit)
+MODULE_LICENSE("GPL");
-- 
2.17.0.441.gb46fe60e1d-goog

  reply	other threads:[~2018-05-18  1:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18  1:59 [PATCH RFC 0/2] Tests for preemptoff and irqsoff tracers Joel Fernandes
2018-05-18  1:59 ` Joel Fernandes [this message]
2018-05-18 21:09   ` [PATCH 1/2] lib: Add module to simulate atomic sections for testing {preempt,irqs}off tracers Andy Shevchenko
2018-05-18 22:58     ` Joel Fernandes
2018-05-19 18:30       ` Andy Shevchenko
2018-05-21  0:28   ` kbuild test robot
2018-05-18  1:59 ` [PATCH 2/2] kselftests: ftrace: Add tests for the preemptoff and irqsoff tracers Joel Fernandes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180518015902.131427-2-joelaf@google.com \
    --to=joelaf@google.com \
    --cc=boqun.feng@gmail.com \
    --cc=erickreyes@google.com \
    --cc=joel@joelfernandes.org \
    --cc=julia@ni.com \
    --cc=kernel-team@android.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=mhiramat@kernel.org \
    --cc=mingo@redhat.com \
    --cc=namhyung@kernel.org \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    --cc=tkjos@google.com \
    --cc=tom.zanussi@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).