linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: grygorii.strashko@ti.com, davem@davemloft.net
Cc: corbet@lwn.net, akpm@linux-foundation.org,
	netdev@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	vinicius.gomes@intel.com, henrik@austad.us,
	jesus.sanchez-palencia@intel.com,
	Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Subject: [RFC PATCH 3/6] net: ethernet: ti: cpsw: add MQPRIO Qdisc offload
Date: Sat, 19 May 2018 00:15:07 +0300	[thread overview]
Message-ID: <20180518211510.13341-4-ivan.khoronzhuk@linaro.org> (raw)
In-Reply-To: <20180518211510.13341-1-ivan.khoronzhuk@linaro.org>

That's possible to offload vlan to tc priority mapping with
assumption sk_prio == L2 prio.

Example:
$ ethtool -L eth0 rx 1 tx 4

$ qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1

$ tc -g class show dev eth0
+---(100:ffe2) mqprio
|    +---(100:3) mqprio
|    +---(100:4) mqprio
|    
+---(100:ffe1) mqprio
|    +---(100:2) mqprio
|    
+---(100:ffe0) mqprio
     +---(100:1) mqprio

Here, 100:1 is txq0, 100:2 is txq1, 100:3 is txq2, 100:4 is txq3
txq0 belongs to tc0, txq1 to tc1, txq2 and txq3 to tc2
The offload part only maps L2 prio to classes of traffic, but not
to transmit queues, so to direct traffic to traffic class vlan has
to be created with appropriate egress map.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
---
 drivers/net/ethernet/ti/cpsw.c | 82 ++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 9bd615da04d3..4b232cda5436 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -39,6 +39,7 @@
 #include <linux/sys_soc.h>
 
 #include <linux/pinctrl/consumer.h>
+#include <net/pkt_cls.h>
 
 #include "cpsw.h"
 #include "cpsw_ale.h"
@@ -153,6 +154,8 @@ do {								\
 #define IRQ_NUM			2
 #define CPSW_MAX_QUEUES		8
 #define CPSW_CPDMA_DESCS_POOL_SIZE_DEFAULT 256
+#define CPSW_TC_NUM			4
+#define CPSW_FIFO_SHAPERS_NUM		(CPSW_TC_NUM - 1)
 
 #define CPSW_RX_VLAN_ENCAP_HDR_PRIO_SHIFT	29
 #define CPSW_RX_VLAN_ENCAP_HDR_PRIO_MSK		GENMASK(2, 0)
@@ -453,6 +456,7 @@ struct cpsw_priv {
 	u8				mac_addr[ETH_ALEN];
 	bool				rx_pause;
 	bool				tx_pause;
+	bool				mqprio_hw;
 	u32 emac_port;
 	struct cpsw_common *cpsw;
 };
@@ -1577,6 +1581,14 @@ static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_common *cpsw)
 	soft_reset_slave(slave);
 }
 
+static int cpsw_tc_to_fifo(int tc, int num_tc)
+{
+	if (tc == num_tc - 1)
+		return 0;
+
+	return CPSW_FIFO_SHAPERS_NUM - tc;
+}
+
 static int cpsw_ndo_open(struct net_device *ndev)
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
@@ -2190,6 +2202,75 @@ static int cpsw_ndo_set_tx_maxrate(struct net_device *ndev, int queue, u32 rate)
 	return ret;
 }
 
+static int cpsw_set_tc(struct net_device *ndev, void *type_data)
+{
+	struct tc_mqprio_qopt_offload *mqprio = type_data;
+	struct cpsw_priv *priv = netdev_priv(ndev);
+	struct cpsw_common *cpsw = priv->cpsw;
+	int fifo, num_tc, count, offset;
+	struct cpsw_slave *slave;
+	u32 tx_prio_map = 0;
+	int i, tc, ret;
+
+	num_tc = mqprio->qopt.num_tc;
+	if (num_tc > CPSW_TC_NUM)
+		return -EINVAL;
+
+	if (mqprio->mode != TC_MQPRIO_MODE_DCB)
+		return -EINVAL;
+
+	ret = pm_runtime_get_sync(cpsw->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(cpsw->dev);
+		return ret;
+	}
+
+	if (num_tc) {
+		for (i = 0; i < 8; i++) {
+			tc = mqprio->qopt.prio_tc_map[i];
+			fifo = cpsw_tc_to_fifo(tc, num_tc);
+			tx_prio_map |= fifo << (4 * i);
+		}
+
+		netdev_set_num_tc(ndev, num_tc);
+		for (i = 0; i < num_tc; i++) {
+			count = mqprio->qopt.count[i];
+			offset = mqprio->qopt.offset[i];
+			netdev_set_tc_queue(ndev, i, count, offset);
+		}
+	}
+
+	if (!mqprio->qopt.hw) {
+		/* restore default configuration */
+		netdev_reset_tc(ndev);
+		tx_prio_map = TX_PRIORITY_MAPPING;
+	}
+
+	priv->mqprio_hw = mqprio->qopt.hw;
+
+	offset = cpsw->version == CPSW_VERSION_1 ?
+		 CPSW1_TX_PRI_MAP : CPSW2_TX_PRI_MAP;
+
+	slave = &cpsw->slaves[cpsw_slave_index(cpsw, priv)];
+	slave_write(slave, tx_prio_map, offset);
+
+	pm_runtime_put_sync(cpsw->dev);
+
+	return 0;
+}
+
+static int cpsw_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
+			     void *type_data)
+{
+	switch (type) {
+	case TC_SETUP_QDISC_MQPRIO:
+		return cpsw_set_tc(ndev, type_data);
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static const struct net_device_ops cpsw_netdev_ops = {
 	.ndo_open		= cpsw_ndo_open,
 	.ndo_stop		= cpsw_ndo_stop,
@@ -2205,6 +2286,7 @@ static const struct net_device_ops cpsw_netdev_ops = {
 #endif
 	.ndo_vlan_rx_add_vid	= cpsw_ndo_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= cpsw_ndo_vlan_rx_kill_vid,
+	.ndo_setup_tc           = cpsw_ndo_setup_tc,
 };
 
 static int cpsw_get_regs_len(struct net_device *ndev)
-- 
2.17.0

  parent reply	other threads:[~2018-05-18 21:16 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18 21:15 [RFC PATCH 0/6] net: ethernet: ti: cpsw: add MQPRIO and CBS Qdisc offload Ivan Khoronzhuk
2018-05-18 21:15 ` [RFC PATCH 1/6] net: ethernet: ti: cpsw: use cpdma channels in backward order for txq Ivan Khoronzhuk
2018-05-18 21:15 ` [RFC PATCH 2/6] net: ethernet: ti: cpdma: fit rated channels in backward order Ivan Khoronzhuk
2018-05-18 21:15 ` Ivan Khoronzhuk [this message]
2018-05-18 21:15 ` [RFC PATCH 4/6] net: ethernet: ti: cpsw: add CBS Qdisc offload Ivan Khoronzhuk
2018-05-18 21:15 ` [RFC PATCH 5/6] net: ethernet: ti: cpsw: restore shaper configuration while down/up Ivan Khoronzhuk
2018-05-18 21:15 ` [RFC PATCH 6/6] Documentation: networking: cpsw: add MQPRIO & CBS offload examples Ivan Khoronzhuk
2018-05-23 15:43 ` [RFC PATCH 0/6] net: ethernet: ti: cpsw: add MQPRIO and CBS Qdisc offload Grygorii Strashko
2018-06-04 17:23 ` Vinicius Costa Gomes
2018-06-06  8:53   ` Ivan Khoronzhuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180518211510.13341-4-ivan.khoronzhuk@linaro.org \
    --to=ivan.khoronzhuk@linaro.org \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=henrik@austad.us \
    --cc=jesus.sanchez-palencia@intel.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vinicius.gomes@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).